Estimating the uncertainty in simulating the impacts of small farm dams on streamflow regimes in South Africa

Abstract

Small dams represent an important local-scale resource designed to increase water supply reliability in many parts of the world where hydrological variability is high. There is evidence that the number of farm dams has increased substantially over the last few decades. These developments can have a substantial impact on downstream flow volumes and patterns, water use and ecological functioning. The study reports on the application of a hydrological modelling approach to investigate the uncertainty associated with simulating the impacts of farm dams in several South African catchments. The focus of the study is on sensitivity analysis and the limitations of the data that would be typically available for water resources assessments. The uncertainty mainly arises from the methods and information that are available to estimate the dam properties and the water use from the dams. The impacts are not only related to the number and size of dams, but also the extent to which they are used for water supply as well as the nature of the climate and the natural hydrological regimes. The biggest source of uncertainty in South Africa appears to be associated with a lack of reliable information on volumes and patterns of water abstraction from the dams.

Citation Hughes, D. A. & Mantel, S. K. (2010) Estimating the uncertainty in simulating the impacts of small farm dams on streamflow regimes in South Africa. Hydrol. Sci. J. 55(4), 578–592.     

Carbon fluxes from eroding peatlands – the carbon benefit of revegetation following wildfire

Peatlands are among the largest long‐term soil carbon stores, but their degradation can lead to significant carbon losses. This study considers the carbon budget of peat‐covered sites after restoration, following degradation by past wildfires. The study measured the carbon budget of eight sites: four restored‐revegetated sites, two unrestored bare soil control sites, and two intact vegetated controls over two years (2006–2008). The study considered the following flux pathways: dissolved organic carbon (DOC); particulate organic carbon (POC); dissolved carbon dioxide (CO₂); primary productivity; net ecosystem respiration, and methane (CH₄). The study shows that unrestored, bare peat sites can have significant carbon losses as high as 522 ± 3 tonnes C/km²/yr. Most sites showed improved carbon budgets (decreased source and/or increased sink of carbon) after restoration; this improvement was mainly in the form of a reduction in the size of the net carbon source, but for one restored site the measured carbon budget after four years of restoration was greater than observed for vegetated controls. The carbon sequestration benefit of peatland restoration would range between 122 and 833 tonnes C/km²/yr. Copyright © 2011 John Wiley & Sons, Ltd.     

A laboratory study of the turbulent ekman layer

Abstract

Comparing characteristics of a turbulent Ekman boundary layer in a rotating apparatus with atmospheric observations and theories, we find that the similarity relations derived by Kazanski and Monin, and others, scale both laboratory and field data quite well, especially considering that the Coriolis parameter is larger by a factor of 10⁵ in the experiment than it is in the atmosphere. Eddy viscosity models and Deardorff's numerical model predict the properties of both with varying degrees of success. High frequency spectra of velocity fluctuations scale with the Kolmogoroff length and time scales. Both magnitude and direction of the surface shear stress were measured directly, with a heated film stress gauge.     

Sorption and desorption of dissolved organic phosphorus onto iron (oxyhydr)oxides in seawater

Sorption of phosphorus (P) onto particulate surfaces significantly influences dissolved P concentrations in aquatic environments. We present results of a study contrasting the sorption behavior of several dissolved organic phosphorus (DOP) compounds and phosphate onto three commonly occurring iron (oxyhydr)oxides (Fe_ox): ferrihydrite, goethite, and hematite. The DOP compounds were chosen to represent a range of molecular weights and structures, and include: adenosine triphosphate (ATP), adenosine monophosphate (AMP), glucose-6-phosphate (G6P), and aminoethylphosphonic acid (AEP).All P compounds displayed decreasing sorption as a function of crystallinity of the Fe_ox substrate, with ferrihydrite adsorbing the most, hematite the least. In general, maximum sorption density decreased with increasing molecular weight of P compound; sorption of G6P onto goethite and hematite excepted. P compound size and structure, and the nature of the Fe_ox substrate all appear to play a role dictating relative sorption capacity. Failure of a simple, 1-step sorption-desorption model to describe the data suggests that P sorption cannot be explained by a simple balance between sorption and desorption. Instead, the data are consistent with a 2-step sorption model consisting of an initial rapid surface sorption, followed by a slow, solid-state diffusion of P from surface sites into particle interiors. Desorption experiments provide additional support for the 2-step sorption model.Without exception, DOP compounds showed less efficient sorption than did orthophosphate. This suggests that in aquatic systems enriched in reactive Fe_ox, whether as suspended particulates in the water column or in benthic sediments, DOP bioavailability may exceed that of orthophosphate. Since biological uptake of P from DOP requires enzymatic cleavage of orthophosphate, a system enriched in DOP relative to orthophosphate may impact ecosystem community structure.     

Geochemistry of redeposited and undisturbed ancient weathering zones in the Baikal Region

The distribution of major and trace elements was explored in the metamorphised weathering zones of the northern (Purpol Formation) and western (Anai and Angin formations) Baikal region. The alumina-rich schists of the Purpol and Anai formations intercalated with quartzites have a model age of 2.8–3.0 Ga and are redeposited products of the weathering of granitized basement inliers of the Siberian craton. Their trace element characteristics with high contents of Th, U, Nb, and REE and low Ta and Sr reflect the composition of predominant rocks in the Archean basement. Undisturbed weathering zones over the alkaline and calc-alkaline island-arc basalts of the Angin Formation are, in general, similar to modern laterites and redeposited residues with respect to the enrichment in hydrolyzate elements but are assigned to iron-rich laterites and distinguished by high contents of Fe, Ti, Nb, Ta, Zr, and Hf, which were inherited from their parent rocks. Their occurrence suggests subaerial eruptions of alkali basalts in the proximal part of the Angin-Talanchan island arc.     

Geochemistry and Petrogenesis of Late Ediacaran Rare-metalAlbite Granites of the Arabian-Nubian Shield

The Abu Dabbab albite granite(ADAG), in the central Eastern Desert of Egypt, hosts the most significant rare metal ore deposit in the northern part of the Neoproterozoic Arabian-Nubian Shield. Here, we report detailed field,petrographic, mineralogical and geochemical investigation of the ADAG, an isolated stock-like granitic body with sharp intrusive contacts against metamorphic country rocks, probably emplaced at about 600 Ma. The fine-grained porphyritic upper unit is a preserved remnant of the shallowly-emplaced apex of the magma chamber, whereas the medium-grained lower unit crystallized at deeper levels under subvolcanic conditions. The peraluminous leucocratic ADAG shares common geochemical characteristics with post-collisional intraplate A-type magmas. In addition to the conspicuous enrichment in Na2 O, the ADAG is remarkable for its anomalous concentrations of Ta, Nb, Li, Hf, Ga, Sn, Zn and heavy rare-earth elements. Nb-Ta minerals in the ADAG are mixed with Fe-Mn oxides, forming black patches that increase in abundance toward of the base of the intrusion. Columbite-tantalite, cassiterite and wolframite are the most important ore minerals.Pronounced negative Eu anomalies(Eu/Eu* = 0.10–0.24) reflect extreme magmatic fractionation and perhaps the effects of late fluid-rock interaction. The ADAG was most likely generated by partial melting of the juvenile middle crust of the ANS as the geotherm was elevated by erosional uplift following lithospheric delamination and it was emplaced at the intersection of lineations of structural weakness. Although formation of the ADAG and its primary enrichment in rare metals are essentially due to magmatic processes, late-stage metasomatism caused limited redistribution of rare metals. Fluid-driven subsolidus modification was limited to the apex of the magma chamber and drove development of greisen, amazonite, and quartz veins along fracture systems.     

Isotopic constraints on growth conditions of multiphase calcite–pyrite–barite concretions in Carboniferous mudstones

Carbonate concretions in the Lower Carboniferous Caton Shale Formation contain diagenetic pyrite, calcite and barite in the concretion matrix or in different generations of septarian fissures. Pyrite was formed by sulphate reduction throughout the sediment before concretionary growth, then continued to form mainly in the concretion centres. The septarian calcites show a continuous isotopic trend from δ¹³C=?28·7‰ PDB and δ¹⁸O=?1·6‰ PDB through to δ¹³C=?6·9‰ PDB and δ¹⁸O=?14·6‰ PDB. This trend arises from (1) a carbonate source initially from sulphate reduction, to which was added increasing contributions of methanogenic carbonate; and (2) burial/temperature effects or the addition of isotopically light oxygen from meteoric water. The concretionary matrix carbonates must have at least partially predated the earliest septarian cements, and thus used the same carbonate sources. Consequently, their isotopic composition (δ¹³C=?12·0 to ?10·1‰ PDB and δ¹⁸O=?5·7 to ?5·6‰ PDB) can only result from mixing a carbonate cement derived from sulphate reduction with cements containing increasing proportions of carbonate from methanogenesis and, directly or indirectly, also from skeletal carbonate. Concretionary growth was therefore pervasive, with cements being added progressively throughout the concretion body during growth. The concretions contain barite in the concretion matrix and in septarian fissures. Barite in the earlier matrix phase has an isotopic composition (δ³⁴S=+24·8‰ CDT and δ¹⁸O=+16·4‰ SMOW), indicating formation from near‐surface, sulphate‐depleted porewaters. Barites in the later septarian phase have unusual isotopic compositions (δ³⁴S=+6 to +11‰ CDT and δ¹⁸O=+8 to +11‰ SMOW), which require the late addition of isotopically light sulphate to the porewaters, either from anoxic sulphide oxidation (using ferric iron) or from sulphate dissolved in meteoric water. Carbon isotope and biomarker data indicate that oil trapped within septarian fissures was derived from the maturation of kerogen in the enclosing sediments.     

Cenozoic tectonic events at the border of the Paraná Basin, São Paulo, Brazil

In the last decade, even in areas that had been considered tectonically stable, a great amount of Cenozoic, including the Quaternary period, structural data have been collected throughout Brazil. The main goal of this study is to describe the Cenozoic structures and tectonic evolution of an area that is located at the border of the Paraná Basin in the state of São Paulo.The research methods consisted of the analysis of: (1) brittle structure data, mainly conjugate fractures and fault slip data; (2) lineaments traced on air photos and TM Landsat and radar images; and (3) a second-order base surface map.The study area, during the Cenozoic, has been affected by five strike–slip tectonic events, which generated mainly strike–slip faults, and secondarily normal and reverse ones. The events were named, from the oldest to the youngest, E1-NE, E2-EW, E3-NW, E4-NS, and E5-NNE; and the maximum principal stresses σ1 strike approximately NE–SW, E–W, NW–SE, N–S, and NNE–SSW, respectively. Event E2-EW seems to have been contemporaneous with the deposition of the Rio Claro Formation, the most important Cenozoic deposit of probable Neogenic age, and also to have controlled the distribution of its deposits. Event E3-NW was the strongest one in the area, as is pointed out by structural data, and the maximum principal stress σ1 of event E5-NNE is partially concordant with the orientation of σH-max of well break-out data in the Paraná Basin, suggesting a Neotectonic activity for this event. Finally, discontinuities parallel and correlated to the directions of strike–slip faults of the Cenozoic events seem to have actively controlled the sculpturing of the relief in the study area.     

Interaction of the Atmosphere and Lithosphere in the Minute Range of Periods

Doklady Earth Sciences - The interaction between the atmosphere and the lithosphere in the minute range of periods is considered. The technique of assessment of the influence of atmospheric...