Vapour transport of rare earth elements (REE) in volcanic gas: Evidence from encrustations at Oldoinyo Lengai

Fumarolic encrustations and natrocarbonatite lava from the active crater of Oldoinyo Lengai volcano, Tanzania, were sampled and analysed. Two types of encrustation were distinguished on the basis of their REE content, enriched (~ 2800–5600 × [REE_chondrite]) and depleted (~ 100–200 × [REE_chondrite]) relative to natrocarbonatite (1700–1900 × [REE_chondrite]. REE-enriched encrustations line the walls of actively degassing fumaroles, whereas REE-depleted encrustations occur mainly along cracks in and as crusts on cooling natrocarbonatite lava flows; one of the low REE encrustation samples was a stalactite from the wall of a possible fumarole. The encrustations are interpreted to have different origins, the former precipitating from volcanic gas and the latter from meteoric/ground water converted to steam by the heat of the overlying lava flow(s). REE-profiles of encrustations and natrocarbonatite are parallel, suggesting that there was no preferential mobilization of specific REE by either volcanic vapour or meteoric water vapour. The elevated REE-content of the first group of encrustations suggests that direct REE-transport from natrocarbonatite to volcanic vapour is possible. The REE trends observed in samples precipitating directly from the volcanic vapour cannot be explained by dry volatility based on the available data as there is no evidence in the encrustation compositions of the greatly enhanced volatility predicted for Yb and Eu. The observed extreme REE-fractionation with steep La/Sm slopes parallel to those of the natrocarbonatite reflects solvation and complexation reactions in the vapour phase that did not discriminate amongst the different REE or similar transport of REE in both the natrocarbonatite magma and its exsolving vapour. The low concentrations of REE in the encrustations produced by meteoric vapour suggest that the temperature was too low or that this vapour did not contain the ligands necessary to permit significant mobilization of the REE.     

Metamorphic reactions in dry and aluminous granulites: a Perple_X <Emphasis Type="Italic">P–T</Emphasis> pseudosection analysis of the influence of effective reaction volume

In high-Mg, Al metapelites, monophase sapphirine corona occur around spinel–corundum aggregates in monomineralic cordierite layers, and bi-phase orthopyroxene–sillimanite aggregates replace locally warped sapphirine in polygonized cordierite aggregates. P–T phase topologies computed (Perple_X software) using compositions of cordierite-rich layers that host the reaction textures did not match the assemblages for the discontinuous reactions spinel + corundum + cordierite → sapphirine and sapphirine + cordierite → orthopyroxene + sillimanite. Instead, the reaction assemblages were reproduced using P–T pseudosection analysis for micro-domain reaction volumes estimated from compositions of product phases in the volume proportion they occur. The results are consistent with known phase relations deduced using Schreinmakers P–T grids. Apparently, the compositions of cordierite-rich layers that hosted the reaction textures were inadequate chemical proxies for determining P–T–X relations of phase-boundary controlled reactions influenced by compositions of the nearest-neighbor minerals in the proportion they react (effective composition), and not in the proportion they existed in the layer/bulk rock. In other words, P–T–X phase topologies and reconstructed P–T paths in dry and aluminous rocks may be best understood by thermodynamic modeling of reactions using effective reaction volume compositions rather than the bulk composition of the rock or the mineralogical layer that host the reaction textures.     

Stratified unbounded flow past of obstacles

We studied the surface perturbations of a two-layer ideal fluid induced by a flow past a submerged obstacle (simulated by a point dipole) in the vicinity of the density-jump layer. It is shown that the formation of two different types of surface waves is possible behind the flowed past obstacle in the real conditions of the open sea. The comparison of the amplitudes of the surface perturbations induced by the obstacle located above and below the density jump revealed their significant differences, which seems to be important for the use of this effect in practical problems.     

Unstable plasma irregular structures in the topside ionosphere and spread-<Emphasis Type="Italic">F</Emphasis>

The results of the Cosmos-900 satellite observ ations of plasma density inhomogeneities in the geomagnetic equator region and the longitudinal distributions of the equatorial spread-F, according to the Intercosmos-19 satellite data are presented. It is show n that the dependence of radiosignal propagation in the ionosphere on geophysical parameters is related to development of the electrostatic instability of the inhomo-geneous ionospheric plasma. The longitudinal dependence of the spread-F, can reflect the influence of the energetic sources, located outside the ionospheric layer that scatters a radio pulse, on the ionosphere. The manifestation of the longitudinal effect in the equatorial spread-F, in the Atlantic region can be explained by the influence of the cone instability on the plasma electrodynamics in the South Atlantic geomagnetic anomaly.     

Seismic structure of the upper mantle beneath the United States by three-dimensional inversion of body wave arrival times

Summary. Teleseismic P and S arrival times to North American stations are obtained from the ISC bulletins for the 10-yr period 1964–73, and relative travel-time delays are calculated with respect to standard tables. Station anomalies as well as variations of the delays with azimuth and epicentral distance from station are analysed, and the location of the velocity anomalies responsible for them is discussed. Inversion of the P delays to infer upper mantle velocity structure down to a depth of 700 km is obtained using three-dimensional blocks, as proposed by Aki, Christofferson & Husebye. Three layers can be resolved in this depth range. It is found that the heterogeneities responsible for the travel-time delays are primarily located in the first 250 km of the upper mantle, and that they correlate with surface features. Significant heterogeneities subsist to depths of at least 700 km and their broad scale pattern also correlates with the surface features: in the third layer (500 to 700 km depth) there is an increase of velocity from the West to the East of the United States, while the second layer (250 to 450 km depth) exhibits a reversed pattern. A tentative interpretation of these deeper anomalies is made, as being due mainly to topography of the major upper mantle discontinuities, near 400 and 650 km depth.     

Partitioning of Ru, Rh, Pd, Re, Ir, and Au between Cr-bearing spinel, olivine, pyroxene and silicate melts

A series of high temperature experiments was undertaken to study partitioning of several highly siderophile elements (HSE; Ru, Rh, Pd, Re, Os, Ir, Pt and Au) between Cr-rich spinel, olivine, pyroxene and silicate melt. Runs were carried out on a Hawaiian ankaramite, a synthetic eucrite basalt, and a DiAn eutectic melt, at one bar, 19 kbar, and 20 kbar, respectively, in the temperature range of 1200 to 1300°C, at oxygen fugacities between the nickel-nickel oxide (NNO) and hematite-magnetite (HM) oxygen buffers. High oxygen fugacities were used to suppress the formation of HSE-rich “nuggets” in the silicate melts. The resulting oxide and silicate crystals (<100 μm) were analyzed using both SIMS and LA-ICP-MS, with a spatial resolution of 15 to 50 μm. Rhenium, Au and Pd were all found to be incompatible in Cr-rich spinel (D_Re^sp/melt = 0.0012-0.21, D_Au^sp/melt = 0.076, D_Pd^sp/melt = 0.14), whereas Rh, Ru and Ir were all found to be highly compatible (D_Rh^sp/melt = 41-530, D_Ru^sp/melt = 76-1143, D_Ir^sp/melt = 5-22000). Rhenium, Pd, Au and Ru were all found to be incompatible in olivine (D_Re^oliv/melt = 0.017-0.073, D_Pd^oliv/melt = 0.12, D_Au^oliv/melt = 0.12, D_Ru^oliv/melt = 0.23), Re is incompatible in orthopyroxene and clinopyroxene (D_Re^opx/melt = 0.013, D_Re^cpx/melt = 0.18-0.21), and Pt is compatible in clinopyroxene (D_Pt^cpx/melt = 1.5). The results are compared to and combined with previous work on HSE partitioning among spinel-structured oxides, and applied to some natural magmatic suites to demonstrate consistency.     

Landscape planning in the Transcaucasia

We have developed the planning documents for model territories of a different dimension: the landscape program of Adzharia (Georgia), the landscape structure plan for the Lake Sevan watershed basin (Armenia), and the landscape plan for the Shirvan National Park (Azerbaijan). Variants of the solution of regional natural-ecological problems are proposed, and the measures for implementation of the target concepts are substantiated.     

Mica beards in three slates: Morphology,formation and bearing on the strain history

Beards are intergrowths of mica, chlorite and quartz or feldspar on detrital grains in weakly metamorphosed sedimentary rocks. The three samples studied contain beards of mica and quartz (or feldspar). Their internal morphology shows a variation in mica orientation related to the external foliation (matrix). Formation occurred during foliation development with a syntaxial growth history. In three dimensions, the beards have oblate shapes, so that they are present in all planes cut parallel to the shortening direction. This indicates flattening strain conditions around the detrital grains during the beard formation.Bulk inhomogeneous shortening, resulting in an anastomosing foliation, can explain the local extension within the plane containing the fold axis and the shortening direction. Concurrently, an approximately constant lenght in the direction of the fold axis is maintained on a regional scale (plane strain). Volume loss probably plays an important role during the formation history.

---

Zusammenfassung Glimmerbärte in schwach metamorphen Sedimenten sind syntektonische Verwachsungen von Glimmer, Chlorit, Quarz oder Feldspat auf detritischen Körnern. Die drei hier untersuchten Proben enthalten Bärte aus Hellglimmer und Quarz (oder Feldspat). Die Glimmerorientierung zeigt Variationen in Relation zum umgebenden Schieferungsgefüge (Matrix). Die Bildung der Bärte fand mit syntaxialem Wachstum während der Schieferung statt. Dreidimensional haben die Bärte eine abgeplattete Gestalt, so daß sie in allen Schnittlagen parallel zur Verkürzungsrichtung zu beobachten sind. Dies weist auf plättende Verformung um detritische Körner während der Bildung der Bärte hin.Bulk inhomogeneous shortening führt zu einem linsigen Schieferungsgefüge und kann bei gleichzeitiger Annahme einer nicht volumenkonstanten Deformation als Erklärung für die im Korngefüge beobachtete Dehnung parallel zur Faltenachse herangezogen werden. Im regionalen Maßstab wird aber eine konstante Länge in Richtung der Faltenachse und damit ebene Deformation angenommen.

---

Résumé Les barbes de mica sont des intercroissances de quartz (ou feldspath) et de mica sur des grains détritiques dans les roches sédimentaires peu métamorphisées. Elles ont été étudiées dans trois échantillons. Leur morphologie interne montre une variation dans l'orientation du mica en relation avec la schistosité externe (matrice). Leur formation s'est produite pendant le développement de la schistosité, avec une histoire de croissance «syntaxiale». Les barbes ont une forme oblongue en trois dimensions, de sorte qu'elles sont visibles dans toutes les sections parallèles à la direction de raccourcissement. Cela indique, pendant la formation des barbes, l'existence d'un aplatissement autour des grains détritiques.Le raccourcissement non homogène, qui entraîne une foliation anastomosée peut être invoqué, conjointement à une déformation avec perte de volume, pour expliquer l'allongement que présente localement la microstructure parallèlement à l'axe des plis. A l'échelle régionale, toutefois, on admet la constance de la longuer selon la direction des axes et, partant, le caractère plan de la déformation.

---

, (Glimmerbärte). Glimmerbärte ( ). — . Glimmerbärte . Glimmerbärte , , . Bulk inhomogeneous shortening , , , . .