Effect of wave amplitude on turbulent flow in a wavy channel by direct numerical simulation

The present study numerically investigates the characteristics of three-dimensional turbulent flow in a wavy channel. For the purpose of a careful observation of the effect of the wave amplitude on the turbulent flow, numerical simulations are performed at a various range of the wave amplitude to wavelength ratio (0.01?α/λ?0.05), where the wavelength is fixed with the same value of the mean channel height (H). The immersed boundary method is used to handle the wavy surface in a rectangular grid system, using the finite volume method. The Reynolds number (Re=U_bH/ν) based on the bulk velocity (U_b) is fixed at 6760. The present computational results for a wavy surface are well compared with those of references. When α/λ=0.02, the small recirculating flow occurs near the trough at the instant, but the mean reverse flow is not observed. In the mean flow field, the reverse flow appears from α/λ=0.03 among the wave amplitude considered in this study. The domain of the mean reverse flow defined by the locations of separation and reattachment depends strongly on the wave amplitude. The pressure drag coefficient augments with increasing the wave amplitude. The friction drag coefficient shows the increase and decrease behavior according to the wave amplitude. The quantitative information about the flow variables such as the distribution of pressure and shear stress on the wavy surface is highlighted.     

Partitioning of polycyclic aromatic hydrocarbons between water and particles compared to bioaccumulation in mussels: a harbour case

Water and particles from three sites located in Halifax Harbour, near and further away from combined municipal sewage effluents (CMSE) were analysed for parental and alkylated polycyclic aromatic hydrocarbons (par and alkPAH). Bioavailability of PAH was compared for inter-tidal mussels collected at the same sites in April and November. The PAH fingerprint determined over 9 sampling times covering a period of 19 months differed more between phases (water and particles) and seasons, than between sites. In the spring, more alkPAH associated with diesel and gasoline were detected in the soluble phase, along with more bioaccumulation of alkPAH in inter-tidal mussels. A broader number of parPAH were detected in mussels collected in the fall. The mean sum of dissolved alkPAH concentrations was higher in water at the site closer to raw CMSE than at the other two sites and particles of that site. However, lowest bioconcentration factors (BCF) were determined in mussels of this more contaminated site. Similar biota-particle accumulation factors (BPAF) were determined for parPAH in mussels from the three sites, all lower than the BCF of alkPAH. The study indicates that sewage treatment plants will reduce the amount of parPAH especially larger than fluoranthene and pyrene from being deposited in the harbour; that alk naphthalenes and fluorenes present in water will continue to be discharged; that the disturbance of sediments can make particle-bound PAH available to mussels.     

The estimation of acid dissociation constants in seawater media from potentionmetric titrations with strong base. I. The ionic product of water — Kw

The various assumptions implicit in the calculation of acid dissociation constants (based on ionic medium standard states) from potentiometric titrations using a cell with liquid junction (i.e. a pH measuring cell) have been examined. It was concluded that results can be obtained having an accuracy commensurate with the experimental precision. It has been shown that although the precise composition of the medium is a function of the hydrogen ion concentration (because of the protolytic nature of some of the ions in the media, e.g., sulphate and fluoride), the effect of such variations in the medium composition can be compensated for when defining the activity of hydrogen ion on an ionic medium standard state by defining the concentration of hydrogen ion as:

where β_HSO4 and β_HF are the relevant association constants and S_T and F_T are the total concentrations of sulphate and fluoride, respectively.This approach was used to obtain values for the ionic product of water (K_W) in artificial seawater media at various temperatures and ionic strengths. These were fitted to give the equation (molal concentration units):

$\text{pK}{}_{\mathrm{w}}\text{=}\text{3441.0}\text{T}\text{+2.256-0.7091}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{(}\text{rms deviation 0.01}\text{)}$

where I is the formal ionic strength of the artificial seawater medium and T is the absolute temperature. The values obtained are in reasonable agreement with those found by previous workers.     

The salt composition of rivers in Wrangel Island

Pioneer information about the chemical composition of river water in Wrangel Island has been obtained. It is shown that the water composition reflects the lithogeochemical specifics of primary rocks and ore mineralization. In contrast to many areas of the Russian Far North, river waters of the island are characterized by an elevated background value of total mineralization (i.e., total dissolved solids, TDS) (0.3–2 g/l) and specific chemical type (SO₄-Ca-Mg). This is related to abundance of Late Carboniferous gypsiferous and dolomitic sequences in the mountainous area of the island. It has also been established that the salt composition of some streams is appreciably governed by supergene alterations of the sulfide mineralization associated with the quartz-carbonate vein systems. They make up natural centers of surface water contamination. Waters in such streams are characterized by low pH values (2.4–5.5), high TDS (up to 6–23 g/l) and the SO₄-Mg composition. These waters are also marked by anomalously high concentrations of heavy and nonferrous metals, as well as REE, U, and Th.     

Some basic notions in geographical synthesis

Modern geography is based on ecological thinking. In this paper some geoecological notions are discussed: the scales and levels regarding spatial magnitude and complexity, the “hierarchy” of landscape units and espcially the scale of time and the concept of the supper-imposing “stamps”. This last mentioned concept is very important in relation to the problem regarding regionalization and its possibilities. Three “stamps” are recognized: 1. the substrate, 2. the climatic conditions, 3. the human (noötic) influence. Holistic regionalization in which all elements (including the human influences) are telling to full advantage, is unsatisfactory.     

Agglutinated abyssal foraminifers of the equatorial pacific

The quantitative study of the distribution and taxonomic composition of recent living and dead (without plasma) benthic foraminifers revealed three foraminiferal assemblages in the bottom sediments of the Pacific Ocean at depths of 3350 to 4981 m. The assemblage dominated by the epibenthic Lagenammina difflugiformis, Reophax dentaliniformis, and Saccorhiza ramosa occupies the slopes of underwater hills. The assemblage with a high share of the infaunal Cribrostomoides subglobosum, C. nitidum, and Ammobaculites agglutinans is registered on the abyssal plateau. The assemblage with a significant proportion of the large Astrorhiza and Reophax species, which are characterized by an active way of life, populates gentle slopes and narrow depressions with potentially strong bottom currents.     

Radon-rich waters in Russia

In radon mineral curative waters, according to Russian mineral water classification, the radon concentration should be greater than 185 Bq/l. There are about 30 mineral waters with high levels of radon in Russia. Radon-rich waters have high therapeutic effects. It is proven that natural background radiation stimulates the human immune system. Radon is a natural radioactive gas that has no taste, smell or color. Radon-222 is one of the heaviest elements in the zero groups of inert gases. It is a gaseous radioactive element. All radon isotopes are -emitters while the transformation of its decay products is accompanied by the emitting of -or -particles. The main products of radon decay are short-lived isotopes Po, Pb, Bi, and TL. Belonging to the uranium and thorium decay chain, radon isotopes form directly during the decay of radium isotopes. Therefore the radon concentration depends upon the concentration of its parent's isotope in water and rocks washed by it as well as upon the amount of radon emanation. Loose rocks or rocks with a great number of cracks are characterized by higher radon concentration (zones of tectonic disturbance, weathering crusts, etc.).Crystalline rocks usually have higher uranium concentrations than the average bedrock. Examples of rock types, which often have enhanced uranium concentration >5% ppm U includes the following: granites, syenites, pegmatite, acid volcanic rocks and acid gneisses. In the earth's crust radon migrates either in a gaseous or dissolved state. It can go to the surface without any chemical reaction. Formation of the radon-rich therapeutics waters of Russia has been analyzed, and most of them are genetically connected to crystalline acid rocks that have exceeded uranium-radium mineralization. The radon content in Russia reaches more than 8,000 Bq/l. Radon-rich waters of this type occur in the Altai, Karelia, St Petersburg and Trans-Baikal regions. Another type is connected to geodynamic activity of regions and secondary radioactivity. A well-known example of radon-rich waters of the second type is Pyatigorsk in the North Caucasus. Mixing confined carbon dioxide-hydrogen sulfide water and unconfined groundwater forms radon waters. The radon concentration is 1,170–2,430 Bq/l. The occurrence of radon-rich water deposits in other regions of Russia is described. Further investigation of the radon content in other geological environments will contribute to the environmental safety as well as to the solution to many genetic, hydrogeochronological, paleoreconstructive and prediction problems in hydrogeology.