Mechanical compaction and ultrasonic velocity of sands with different texture and mineralogical composition

This study presents the results of experimental compaction while measuring ultrasonic velocities of sands with different grain size, shape, sorting and mineralogy. Uniaxial mechanical compaction tests up to a maximum of 50 MPa effective stress were performed on 29 dry sand aggregates derived from eight different sands to measure the rock properties. A good agreement was found between the Gassmann saturated bulk moduli of dry and brine saturated tests of selected sands. Sand samples with poor sorting showed low initial porosity while sands with high grain angularity had high initial porosity. The sand compaction tests showed that at a given stress well‐sorted, coarse‐grained sands were more compressible and had higher velocities (Vp and Vs) than fine‐grained sands when the mineralogy was similar. This can be attributed to grain crushing, where coarser grains lead to high compressibility and large grain‐to‐grain contact areas result in high velocities. At medium to high stresses the angular coarse to medium grained sands (both sorted sands and un‐sorted whole sands) showed high compaction and velocities (Vp and Vs). The small grain‐to‐grain contact areas promote higher deformation at grain contacts, more crushing and increased porosity loss resulting in high velocities. Compaction and velocities (Vp and Vs) increased with decreasing sorting in sands. However, at the same porosity, the velocities in whole sands were slightly lower than in the well‐sorted sands indicating the presence of loose smaller grains in‐between the framework grains. Quartz‐poor sands (containing less than 55% quartz) showed higher velocities (Vp and Vs) compared to that of quartz‐rich sands. This could be the result of sintering and enlargement of grain contacts of ductile mineral grains in the quartz‐poor sands increasing the effective bulk and shear stiffness. Tests both from wet measurements and Gassmann brine substitution showed a decreasing Vp/Vs ratio with increasing effective stress. The quartz‐rich sands separated out towards the higher side of the Vp/Vs range. The Gassmann brine substituted Vp and Vs plotted against effective stress provide a measure of the expected velocity range to be found in these and similar sands during mechanical compaction. Deviations of actual well log data from experimental data may indicate uplift, the presence of hydrocarbon, overpressure and/or cementation. Data from this study may help to model velocity‐depth trends and to improve the characterization of reservoir sands from well log data in a low temperature (<80–100^o C) zone where compaction of sands is mostly mechanical.     

Petroleum-related hydrocarbons in deep and subsurface sediments from South-Western Barents Sea

Subsurface sediments from a pockmark area in South-Western Barents Sea have been earlier found to contain elevated levels of petroleum-related polycyclic aromatic hydrocarbons. This work describes a comprehensive analysis of various biomarkers, including the highly source-specific hopanes, in a 4.5?m long gravity core from the same area, together with subsurface sediment samples from other areas in the region without pockmarks present ("background samples"). A clear difference between the pockmark gravity core and the background sediment cores was found, both with regard to genesis and the level of transformation of organic matter. A number of indicator parameters, such as methylphenanthrene index (MPI-1), point towards a significantly higher maturity of hydrocarbons in the pockmark core throughout its length as compared to the other sampled locations. Higher contents of microbial hopanoids (hopenes) may indicate the former presence of petroleum. These findings confirm the hypothesis of a natural hydrocarbon source in the deeper strata present in the studied location with pockmarks.     

Chemical and structural relations of epitaxial xenotime and zircon substratum in sedimentary and hydrothermal environments: a TEM study

Xenotime overgrowths on detrital zircon in siliciclastic sediments have been reported in numerous studies. However, in natural samples, solid solution of zircon and xenotime is limited to near-end-member compositions. In order to characterize the interface region between both minerals and to draw inferences on the growth mechanisms of authigenic xenotime, we studied xenotime overgrowths on detrital zircon grains from two Phanerozoic sandstone samples with contrasting post-depositional histories. In one sample, the small (≤10 μm), pyramidal xenotime overgrowths are of diagenetic origin and grew without major discontinuity on the detrital zircon grain. The second sample shows up to >50-μm-wide, porous and inclusion-rich, hydrothermal xenotime overgrowths on detrital zircon, whereas the transition zone between both minerals is accompanied by large pore volume. Chemical compositions of the xenotime precipitates from the two samples differ particularly in Y, REE, Th and Sc concentrations, whereas high MREE availability in the diagenetic sample and the presence of Sc in the hydrothermal sample, respectively, appear to have promoted xenotime growth. Transmission electron microscopy on electron-transparent foils cut from the interface region shows that both the diagenetic xenotime and the hydrothermal xenotime are crystalline and grew in optical and crystallographic continuity to their detrital zircon substrata. Only a narrow transition zone (≤90 nm—diagenetic sample, 200–300 nm—hydrothermal sample) between zircon and xenotime is in part made up of nanometre-scale crystalline domains that are slightly distorted and may have formed from dissolution–re-precipitation processes at the zircon rim along with precipitation from the respective fluid.     

Metal dynamics in an Antarctic food chain

The concentrations of copper, zinc, cadmium, selenium and mercury were determined in eggs, muscle, liver, kidney and stomach content of nestilings and adults of the Antarctic petrel, Thalassoica antarctica, and its predator, the south polar skua, Chataracta maccormicki, from Svarthamaren, Dronning Maud Land, Antarctica. The dominant food of the petrels is krill, Euphausia superba. The results show relatively high levels of cadmium in krill, which is assumed to be the main reason for the high levels of cadmium in petrels and skuas. Cadmium is almost absent in eggs, but accumulates very rapidly with age in nestlings. The copper concentrations in livers of nestling petrels reach very high levels during growth. This may be seen in connection with physiological development processes. Mercury seems to be accumulated with age and between trophic levels. Among the nestlings, the mercury levels decrease with increasing age, which may be accomplished by the excretion of mercury through the growth of feathers and as a dilution effect during growth. Selenium and mercury are inversely correlated in nestlings. The levels of zinc were similar for different nestling stages and between nestlings and adults in skuas and petrels.     

Universe models with negative bulk viscosity

The concept of negative temperatures has occasionally been used in connection with quantum systems. A recent example of this sort is reported in the paper of S. Braun et al. (Science 339:52, 2013), where an attractively interacting ensemble of ultracold atoms is investigated experimentally and found to correspond to a negative-temperature system since the entropy decreases with increasing energy at the high end of the energy spectrum. As the authors suggest, it would be of interest to investigate whether a suitable generalization of standard cosmological theory could be helpful, in order to elucidate the observed accelerated expansion of the universe usually explained in terms of a positive tensile stress (negative pressure). In the present note we take up this basic idea and investigate a generalization of the standard viscous cosmological theory, not by admitting negative temperatures but instead by letting the bulk viscosity take negative values. Evidently, such an approach breaks standard thermodynamics, but may actually be regarded to lead to the same kind of bizarre consequences as the standard approach of admitting the equation-of-state parameter w to be less than ?1. In universe models dominated by negative viscosity we find that the fluid’s entropy decreases with time, as one would expect. Moreover, we find that the fluid transition from the quintessence region into the phantom region (thus passing the phantom divide w=?1) can actually be reversed. Also in generalizations of the ΛCDM-universe models with a fluid having negative bulk viscosity we find that the viscosity decreases the expansion of the universe.     

Multixenobiotic resistance, acetyl-choline esterase activity and total oxyradical scavenging capacity of the Arctic spider crab, Hyasaraneus, following exposure to bisphenol A, tetra bromo diphenyl ether and diallyl phthalate

The Arctic has become a sink for persistent organic pollutants (POPs) originating from lower latitudes, and relatively high levels have been found in different biota. Recent studies have identified detrimental effects on wildlife including endocrine disruption, impairment of enzyme activity, and reduced immune function. The Arctic spider crab, Hyas araneus, shown interesting potential for its use as sentinel organism in polar ecosystems. This study investigated the effect of 2,2',4,4'-tetra bromo diphenyl ether (BPDE), bisphenol A (BPA), and diallyl phthalte (DPA) on H. araneus in a three weeks exposure study. Expression of multixenibiotic resistance (MXR) proteins has been studied using the C219 monoclonal antibody which allows identifying an immunoreactive protein of 40 kDa in the digestive gland while no such protein could be observed in the gills. Expression of this protein was increased by exposure to DPA (+75%; p<0.05, n=10). All compounds significantly affected muscle acetylcholine esterase (AChE) activity (p<0.05, n=10) with 50 microg/L DPA having the strongest effect by lowering the value to 37% of control. The total oxyradical scavenging capacity measured in the digestive gland toward peroxyl, hydroxyl and peroxynitrite was also significantly reduced indicating a decreased resistance to oxidative stress generated by DPA (p<0.05, n=5). These results thus suggest the potential detrimental effects of DPA even at concentration as low as 50 microg/L on H. araneus.     

Characteristics of Danish estuaries

We review various aspects of the structure and functioning of Danish estuaries from data collected by the National Monitoring Program and from information in published sources. We present data on the physical, chemical, and biological characteristics of estuaries in Denmark, we evaluate the functioning of these systems as filters and transformers of nutrients and we evaluate the outlook for Danish estuaries in the future. Danish estuarine systems are for the most part shallow (<3 m deep), have short residence times, and tend to be heavily loaded with nutrients primarily from agricultural sources. Total average loads from land per unit watershed area are 112 kg P km^?2 yr^?1 and 2,400 kg N km^?2 yr^?1 during the period 1989–1995. The total phosphorus (TP) load in estuaries has been significantly reduced over the last decade, following implementation of the 1987 Action Plan for the Aquatic Environment (Vandmiljøplan in Danish) that prescribed that nitrogen loads to the total aquatic environment should be reduced by 50% and phosphorus loads by 80%. Reductions in the total nitrogen (TN) load have been more modest. Nutrient loading is one of the primary determinants of estuarine nutrient concentration with 70% of the annual variation in TN concentration and 55% of the annual variation in TP concentration explained by variation in the load. Many Danish estuaries have rich communities of macrophytes and benthic filter feeders, such asMytlis edulis andCiona intestinalis, that can control water column chlorophyll concentrations by their filter feeding activities. Many of the estuaries experience hypoxia and anoxia, especially during warm and calm summer months. Further reductions in nutrient loading are expected following implementation of the Action Plan for the Aquatic Environment II, with predicted improvements in oxygen concentrations and in the functioning of these shallow, dynamic estuarine systems.     

Sensitivity Kernels for Time-Distance Inversion

Inversion of local-area helioseismic time-distance data has so far only been done in the ray approximation (Kosovichev, 1996). Since this is a high-frequency approximation its applicability can be questioned for the solar case. Bogdan (1997) showed that for a simple solar model the localized wave packets do follow, but are not confined to, the ray path. We use an approximation based on the first Fresnel zone that has been developed in geophysics by Snieder and Lomax (1996) to go beyond the ray approximation in the inversions. We have calculated sensitivity kernels using both approximations. To test them we use a finite-difference forward modeling of the whole wave field in an acoustic medium reminiscent of the Sun. We use the finite-difference modeling to calculate sensitivity kernels for the full wave field and compare this with the other kernels. The results show that the Fresnel-zone-based kernels are in good agreement with the sensitivity obtained from the modeling. Thus these new kernels represent a significant step forward in the inversion of time-distance data.     

Comparison of isotope pairing and N2:Ar methods for measuring sediment denitrification—Assumption, modifications, and implications

Denitrification has been measured during the last few years using two different methods in particular: isotope pairing measured on a triple-collector isotopic ratio mass spectrometer and N₂:Ar ratios measured on a membrane inlet mass spectrometer (MIMS). This study compares these two techniques in short-term batch experiments. Rates obtained using the original N₂∶Ar method were up to 3 to 4 times higher than rates obtained using the isotope pairing technique due to O₂ reacting with the N₂ during MIMS analysis. Oxygen combines with N₂ within the mass spectrometer ion source forming NO⁺ which reduces the N₂ concentration. The decrease in N₂ is least at lower O₂ concentrations and since oxygen is typically consumed during incubations of sediment cores, the result is often a pseudo-increase in N₂ concentration being interpreted as denitrification activity. The magnitude of this ocygen effect may be instrument specific. The reaction of O₂ with N₂ and the subsequent decrease in N₂ was only partly correctly using an O₂ correction curve for the relationship between N₂ and O₂ concentrations. The O₂ corrected N₂∶Ar denitrification rates were lower, but still did not match the isotope pairing rates and the variability between replicates was much higher. Using a copper reduction column heated to 600°C to remove all of the O₂ from the sample before MIMS analysis resulted in comparable rates (slightly lower), and comparable variability between replicates, to the isotope pairing technique. The N₂:Ar technique determines the net N₂ production as the difference between N₂ production by denitrification and N₂ consumption by N-fixation, while N-fixation has little effect on the isotope pairing technique which determines a rate very close to the gross N₂ production. When the two different techniques were applied on the same sediment, the small difference in rates obtained by the two methods seemed to reflect N-fixation as also supported from measurements of ethylene production in acetylene enriched sediment cores. The N₂:Ar and isotope pairing techniques may be combined to provide simultaneous measurements of denitrification and N-fixation. Both techniques have several assumptions that must be met to achieve accurate rates; a number of tests are outlined that can be applied to demonstrate that these assumptions are being meet.