Probabilistic modeling of seismically triggered landslides using Monte Carlo simulations

The 2004 Chuetsu earthquakes of Niigata (Japan) triggered numerous landslides, and the most widespread types of landslides were highly disrupted, relatively shallow slides and soil (debris) flows. This paper presented a method to evaluate slope instability using Newmark displacement on a pixel-by-pixel basis in a given area. The proposed method was able to integrate Newmark displacement modeling and Monte Carlo simulations within geographical information systems. In the modeling, an empirical attenuation relationship was utilized to calculate Arias intensity over this study area, and the variability of geotechnical parameters was taken into account to calculate coseismic landslide displacement. Before deriving the displacement from related inputs, the Monte Carlo simulations ran 1,500 times and generated 1,500 displacement values for each grid cell, and then means and standard deviations of displacement were calculated and probabilistic distributions can be obtained. Finally, given 10 cm as a threshold value of displacement, estimated probabilities of displacement exceeding 10 cm were shown as a map of seismic landslide hazards. The resulting hazard map was classified into four categories from very low to high level.     

Slope inclinometers for landslides

Slope inclinometers/indicators are used to determine the magnitude, rate, direction, depth, and type of landslide movement. This information is usually vitally important for understanding the cause, behavior, and remediation of a landslide. However, many inclinometer measurements fail to achieve these intended aims because of lack of appreciation of the many factors that need to be correctly implemented during installation, monitoring, and data reduction to yield useful data. This paper presents some guidelines for understanding, installing, and interpreting slope inclinometers and presents three case histories that illustrate some of the pitfalls that can develop if these guidelines are not followed.     

一种单线河流渐变符号的绘制方法

单线河流渐变符号的自动绘制是地图制图研究中的常见问题,在分析和总结现有单线河流渐变符号绘制方法的基础上,提出一种基于分段缓冲区技术的渐变线绘制方法,详细论述该方法的实现过程,并通过实例验证了该方法的可行性,为自动绘制单线河流渐变符号提供一种新的思路.     

遥感技术在煤炭资源开发状况监督管理中的应用研究

利用高分辨率遥感图象可以快速查明煤炭资源开发状况以及煤炭资源开发的合法性（界内开采、界外开采、越界开采）等,对煤矿安全生产及维护矿业秩序具有重要意义。以我国中部某煤炭开采密集区为试验区,选择不同分辨率的遥感数据,从矿山铺助设施、道路、矿堆、矸石的特征出发,进行矿山开采状况遥感解译;以地理信息系统技术（GIS）为支撑实现采矿权数据、规划数据图层与遥感专题数据的叠加分析和相关分析,判断非法与越界矿山,评价矿产资源开发与保护规划执行情况。     

Climate changing characteristics of Zhangye City in Heihe River basin during 1968–2005

At present, researches on climate change of the Heihe River basin mainly focus on the relationship between basin climate change and regional water resources, regional desertification and dynamic climatic seasons of sandstorm, but less on climate change of oasis region, where there are more intense and frequent human activities. Based on data of precipitation, temperature, strong wind and dust events frequencies obtained from the six meteorological stations of Zhangye region in Heihe River basin, the features of climate change during 1968–2005 were carefully studied. Results show that the regional temperature rise rate exceeded the average level of China. The annual precipitation changed a little, but the precipitation had a slowly increasing trend in spring and winter. Frequencies of strong wind and sandstorm days show obviously descending trends, which had a close correlation with the regional temperature rise and the precipitation increase in spring and winter. Meanwhile, further human economic activities and exploitations to the oasis in the inland valley of arid regions also affected the climate change of this region, which has a sensitive and fragile eco-environment. __________ Translated from Journal of Desert Research, 2007, 27(6): 1048–1054 [译自: 中国沙漠]     

邵于庄煤炭勘查区新生界松散层水文地质特征

邵于庄煤炭勘查区新生界松散层厚度较厚,下伏为二叠系含煤地层,可采煤层多。区内含、隔水层组成复杂,由四个含水层和三个隔水层组成。通过对含水层水文地质条件分析,提出了第一、二含水层是矿区的主要供水水源,为保证未来建设和开采时的生活用水和工业用水,应做好水源的保护工作;同时指明了第四含水层是浅部煤组开采的主要补给水源,在煤矿设计和开采过程中,应重点予以防治。     

贵州糯东井田水文地质条件分析

通过对井田内泉和暗河流量的调查研究,认为永宁镇组一、三段碳酸盐岩裂隙溶洞水为井田的主要含水层,含水层主要接受大气降水及河流的渗透补给;煤层上覆地层飞仙关组为相对隔水层,厚度大于500m,下覆无强含水层,其地下水对煤层的开采影响不大,井田水文地质条件较简单。采用比拟法对井田的涌水量进行了预算,推算该矿井开采设计涌水量为13 238m^3/d。     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

基于本体的地理空间信息集成框架与实现

论述了地理本体的基本概念、结构,介绍了地理本体的建模方法,提出了基于地理本体的空间数据集成框架,包括构建地理本体、数据预处理、概念映射、数据映射和数据抽取与转换5个步骤;设计了基于本体的空间数据集成方案,以数字地形图数据、海图数据向标准本体的集成为例对方案进行验证试验,并取得了初步成果。     

基于空间方向相似性的面状矢量空间数据匹配算法

数据一致性匹配处理技术是空间数据融合中的关键技术.采用方向关系矩阵模型进行空间方向关系描述,讲座了一般情况下的这间方向相似性计算,提出了基于空间方向相似性的矢量数据匹配算法流程.最后,以面状目标为研究对象,以某地局部地区居民地数据为例,对基于空间方向相似性的矢量数据匹配算法进行了试验与分析.