Models of aggradation versus progradation in the Himalayan Foreland

A frequent goal of decompaction analysis is to reconstruct histories of basin subsidence and tectonic loading. In marine environments, eustatic and paleobathymetric uncertainties limit the resolution of these reconstructions. Whereas in the terrestrial basins, these ambiguities are absent, it is still necessary to account for depositional slopes between localities in order to analyze three-dimensional patterns of subsidence. We define two end-members for depositional surfaces: aggradation and progradation. The relative importance of either end-member is a function of the interplay between the rate of net sediment accumulation and the rate of basin subsidence. The models predict the patterns of major drainages (transverse versus longitudinal) and the way in which provenance should be reflected within different portions of a basin. Consequently, paleocurrent and provenance data from the ancient stratigraphic record can be used to distinguish between these endmembers. The subhorizontal depositional surfaces that dominate during times of aggradation provide a well defined reference frame for regional analysis of decompacted stratigraphies and related subsidence. Depositional slopes during progradation can not be as precisely specified, and consequently yield greater uncertainties in reconstructions of subsidence. These models are applied to the Mio-Pliocene foreland basin of the northwestern Himalaya, where sequences of isochronous strata have been analyzed throughout the basin. These time-controlled data delineate a distinctive evolution from largely aggradational to largely progradational depositional geometries as deformation progressively encroaches on the foreland. Such a reconstruction of past depositional surfaces provides a well constrained reference frame for subsequent integration of subsidence histories from throughout the foreland.

---

Zusammenfassung Ein häufiges Ziel der Dekompaktionsanalyse ist es die Beckenabsenkung und die tektonische Belastung zu rekonstruieren. In marinen Ablagerungsräumen limitieren eustatische und paläobathymetrische Unsicherheiten die Auflösung der Rekonstruktion. Bei terrestrischen Becken fehlen diese Zweideutigkeiten; es ist aber trotzdem notwendig, Rechenschaft über den Ablagerungshang zwischen verschiedenen Lokalitäten abzulegen, um dreidimensionale Subsidenzmuster zu analysieren. Wir definieren zwei Endglieder von Ablagerangsflächen: Aggradation und Progradation. Die relative Wichtigkeit des jeweiligen Endglieds ist eine Funktion des Zusammenspiels zwischen der Nettorate der Sedimentakkumulation und der Beckensubsidenz. Die Modelle sagen die Hauptentwässerungsmuster (quer- oder längsverlaufend) vorher, sowie den Weg in dem die Sedimentherkunft innerhalb verschiedener Bereiche des Beckens berücksichtigt werden sollte. Folglich können Paläoströmungs- und Herkunftsdaten alter stratigraphischer Überlieferungen benutzt werden, um zwischen den Endgliedern zu unterscheiden. Die subhorizontale Ablagerungsfläche welche zur Zeit der Aggradation dominant ist, liefert einen gut definierten Referenzrahmen für die regionale Analyse von dekomprimierten Formationen und der damit verknüpften Subsidenz. Ablagerangshänge während Progradation können nicht präzise spezifiziert werden und beinhalten daher größere Unsicherheiten bei der Rekonstruktion der Subsidenz. Diese Modelle wurden übertragen auf das miozäne bis pliozäne Vorgebirgsbecken des nordwestlichen Himalayas, wo Sequenzen von isochronen Schichten durch das gesamte Becken analysiert werden konnten. Diese zeitkontrollierten Daten schildern eine ganz bestimmte Entwicklung, die von einer hauptsächlich aggradierenden zu einer progradierenden Ablagerangsgeometrie verlief, während der die Deformation schrittweise in Richtung Vorland übergriff. Diese Rekonstruktion von ehemaligen Ablagerangsflächen liefert einen guten Referenzrahmen für die folgende Integration der Subsidenzgeschichte des gesamten Vorlands.

---

Résumé L'analyse de décompaction a souvent pour but de reconstituer l'histoire de la subsidence d'un bassin et de la charge tectonique. Dans les milieux marins, de telles reconstitutions sont limitées par des incertitudes de caractère eustatique et paléobathymétrique. Par contre, ces ambiguïtés ne se présentent pas dans le cas des bassins continentaux, où il convient néanmoins de tenir compte de la pente de la surface de dépôt entre les divers points considérés pour établir un schéma tridimensionnel de la subsidence. Nous définissons deux situations extrêmes pour les surfaces de dépôt: l'aggradation et la progradation. L'importance relative de ces deux extrêmes est fonction de l'interaction entre le taux d'accumulation net des sédiments et le taux de subsidence du bassin. Les modèles prévoient la répartition des drainages principaux (transverse ou longitudinal) et la manière dont l'origine des sédiments peut se répercuter dans les diverses parties d'un bassin. Il en résulte que des informations fournies par les relevés stratigraphiques à propos des paléocourants et de la source des sédiments peuvent être utilisées pour faire la distinction entre les deux cas extrêmes. Les surfaces de dépôt subhorizontales, qui prédominent pendant les périodes d'aggradation, fournissent un bon cadre de référence pour les analyses régionales de formations décompactées et de la subsidence qui leur est associée. Les surfaces de dépôt inclinées qui se présentent au cours des progradations ne peuvent pas être définies de manière aussi précise et engendrent par conséquent plus d'incertitude dans la reconstitution de la subsidence. Les auteurs appliquent ces modèles au bassin mio-pliocène d'avant-pays de l'Himalaya nord-occidental, dans lequel des séquences de couches isochrones ont été suivies à travers tout le bassin. Ces données, chronologiquement définies, fournissent l'image d'une évolution nette, depuis des géométries typiques d'aggradation jusqu' à des géométries typiques de progradation, au fur et à mesure de l'emprise progressive de la déformation sur l'avant-pays. Une telle reconstitution des surfaces de dépôt anciennes fournit un bon cadre de référence en vue de l'intégration ultérieure de l'histoire de la subsidence dans l'ensemble de l'avant-pays.

---

. . ; , , . « » « ». . , , . , , , . , , . , . , . , , . .

     

Astrometric investigation with the Tautenburg Schmidt telescope

The observations and the plate reduction technique for the determination of positions and absolute proper motions which is used in Potsdam are described. Recent results have shown that an accuracy of about 0 _. 1 for positions and 0 _. ⁷ cent _. ^–1 for proper motions can be achieved both for bright (8^m–12^m) and faint (16^m–18^m) stars. Three astrometric programmes using the Tautenburg plates are presented.     

Development of a real-time algorithm for detection of solar wind discontinuities

A study is presented of an algorithm, based on the statistical analysis of interplanetary magnetic field data, for the real-time detection of discontinuities in the solar wind. The analysis is based on the application of a sliding or searching algorithm together with a minimum variance treatment. A demonstration is given for a Pioneer data set from 29 August, 1966. This particular data set was chosen because it has been extensively studied (in terms of the fast forward MHD shock wave) by previous groups who utilized the three-dimensional Rankine-Hugoniot shock equations after identifying the shock on a subjective basis. Our procedure differs in that it is perfectly objective because of its searching technique. For this particular data set we identify the original shock with excellent agreement with the earlier studies of its normal vector, as well as an additional shock and tangential discontinuity, neither of which had been identified previously.     

The Hα-cyclonic spectra of a flare loop system on 1981 April 27

The data such as the H-spectrum-spectroheliographic (SSHG) observations, the H-chromospheric observations, etc., of a flare loop prominence which occurred on the western solar limb on 1981 April 27 have been obtained at Yunnan Observatory. The distribution of the internal motions and the macroscopical motion of the flare loop prominence with time and space in the course of its eruption and ascension is derived from the comprehensive analysis of the data. The possible physical pictures and the instability of the motions of the loop are inferred and discussed.     

Preliminary observations of solar radio sources with the Culgoora radioheliograph operating at four frequencies

The Culgoora radioheliograph has been modified for observing at 327.4 MHz, which is in addition to the three frequencies (43.25, 80, and 160 MHz) previously available. At the new frequency the array beamwidth is 56, which represents the highest resolution yet available for metre-wavelength solar mapping.At 327.4 MHz the sources of radio emission are mainly in the lowest layers of the corona. Some preliminary four-frequency observations have been made of type I storms. It is found that the source size generally decreases with increasing observing frequency. This result confirms earlier suggestions that the sources of both type I and type III emission are contained in structures whose boundaries diverge outwards in the corona.     

Relationship between footwall composition,crustal contamination,and fluid–rock interaction in the Platreef,Bushveld Complex,South Africa

In the northern limb of the 2.06-Ga Bushveld Complex, the Platreef is a platinum group elements (PGE)-, Cu-, and Ni-mineralized zone of pyroxenite that developed at the intrusion margin. From north to south, the footwall rocks of the Platreef change from Archaean granite to dolomite, hornfels, and quartzite. Where the footwall is granite, the Sr-isotope system is more strongly perturbed than where the footwall is Sr-poor dolomite, in which samples show an approximate isochron relationship. The Nd-isotope system for samples of pyroxenite and hanging wall norite shows an approximate isochron relationship with an implied age of 2.17 ± 0.2 Ga and initial Nd-isotope ratio of 0.5095. Assuming an age of 2.06 Ga, the ɛNd values range from −6.2 to −9.6 (ave. −7.8, n = 17) and on average are slightly more negative than the Main Zone of the Bushveld. These data are consistent with local contamination of an already contaminated magma of Main Zone composition. The similarity in isotope composition between the Platreef pyroxenites and the hanging wall norites suggests a common origin. Where the country rock is dolomite, the Platreef has generally higher plagioclase and pyroxene δ ¹⁸O values, and this indicates assimilation of the immediate footwall. Throughout the Platreef, there is considerable petrographic evidence for sub-solidus interaction with fluids, and the Δ _{plagioclase–pyroxene} values range from −2 to +6, which indicates interaction at both high and low temperatures. Whole-rock and mineral δD values suggest that the Platreef interacted with both magmatic and meteoric water, and the lack of disturbance to the Sr-isotope system suggests that fluid–rock interaction took place soon after emplacement. Where the footwall is granite, less negative δD values suggest a greater involvement of meteoric water. Consistently higher values of Δ _{plagioclase–pyroxene} in the Platreef pyroxenites and hanging wall norites in contact with dolomite suggest prolonged interaction with CO₂-rich fluid derived from decarbonation of the footwall rocks. The overprint of post crystallization fluid–rock interaction is the probable cause of the previously documented lack of correlation between PGE and sulfide content on the small scale. The Platreef in contact with dolomite is the focus of the highest PGE grades, and this suggests that dolomite contamination played a role in PGE concentration and deposition, but the exact link remains obscure. It is a possibility that the CO₂ produced by decarbonation of assimilated dolomite enhanced the process of PGE scavenging by sulfide precipitation.     

Application of precise 142Nd/144Nd analysis of small samples to inclusions in diamonds (Finsch,South Africa) and Hadean Zircons (Jack Hills,Western Australia)

¹⁴⁶Sm–¹⁴²Nd and ¹⁴⁷Sm–¹⁴³Nd systematics were investigated in garnet inclusions in diamonds from Finsch (S. Africa) and Hadean zircons from Jack Hills (W. Australia) to assess the potential of these systems as recorders of early Earth evolution. The study of Finsch inclusions was conducted on a composite sample of 50 peridotitic pyropes with a Nd model age of 3.3 Ga. Analysis of the Jack Hills zircons was performed on 790 grains with ion microprobe ²⁰⁷Pb/²⁰⁶Pb spot ages from 3.95 to 4.19 Ga. Finsch pyropes yield 100 × ?¹⁴²Nd = ? 6 ± 12 ppm, ?¹⁴³Nd = ? 32.5, and ¹⁴⁷Sm/¹⁴⁴Nd = 0.1150. These results do not confirm previous claims for a 30 ppm ¹⁴²Nd excess in South African cratonic mantle. The lack of a ¹⁴²Nd anomaly in these inclusions suggests that isotopic heterogeneities created by early mantle differentiation were remixed at a very fine scale prior to isolation of the South African lithosphere. Alternatively, this result may indicate that only a fraction of the mantle experienced depletion during the first 400 Myr of its history. Analysis of the Jack Hills zircon composite yielded 100 × ?¹⁴²Nd = 8 ± 10 ppm, ?¹⁴³Nd = 45 ± 1, and ¹⁴⁷Sm/¹⁴⁴Nd = 0.5891. Back-calculation of this present-day ?¹⁴³Nd yields an unrealistic estimate for the initial ?¹⁴³Nd of ? 160 ?-units, clearly indicating post-crystallization disturbance of the ¹⁴⁷Sm–¹⁴³Nd system. Examination of ^146,147Sm–^142,143Nd data reveals that the Nd budget of the Jack Hills sample is dominated by non-radiogenic Nd, possibly contained in recrystallized zircon rims or secondary subsurface minerals. This secondary material is characterized by highly discordant U–Pb ages. Although the mass fraction of altered zircon is unlikely to exceed 5–10% of total sample, its high LREE content precludes a reliable evaluation of ¹⁴⁶Sm–¹⁴²Nd systematics in Jack Hills zircons.     

Controls on porphyroblast size along a regional metamorphic field gradient

Garnet-bearing schists from the Waterville Formation of south-central Maine provide an opportunity to examine the factors governing porphyroblast size over a range of metamorphic grade. Three-dimensional sizes and locations for all garnet porphyroblasts were determined for three samples along the metamorphic field gradient spanning lowest garnet through sillimanite grade, using high-resolution X-ray computed tomography. Comparison of crystal size distributions to previous data sets obtained by stereological methods for the same samples reveals significant differences in mode, mean, and shape of the distributions. Quantitative textural analysis shows that the garnets in each rock crystallized in a diffusion-controlled nucleation and growth regime. In contrast to the typical observation of a correlation between porphyroblast size and position along a metamorphic field gradient, porphyroblast size of the lowest-grade specimen is intermediate between the high- and middle-grade specimens’ sizes. Mean porphyroblast size does not correlate with peak temperatures from garnet-biotite Fe-Mg exchange thermometry, nor is post-crystallization annealing (Ostwald Ripening) required to produce the observed textures, as was previously proposed for these rocks. Robust pseudosection calculations fail to reproduce the observed garnet core compositions for two specimens, suggesting that these calc-pelites experienced metasomatism. For each of these two specimens, Monte Carlo calculations suggest potential pre-metasomatism bulk compositions that replicate garnet core compositions. Pseudosection analyses allow the estimation of the critical temperatures for garnet growth: ∼481, ∼477, and ∼485°C for the lowest-garnet-zone, middle-garnet-zone, and sillimanite-zone specimens, respectively. Porphyroblast size appears to be determined in this case by a combination of the heating rate during garnet crystallization, the critical temperature for the garnet-forming reaction and the kinetics of nucleation. Numerical simulations of thermally accelerated, diffusion-controlled nucleation, and growth for the three samples closely match measured crystal size distributions. These observations and simulations suggest that previous hypotheses linking the garnet size primarily to the temperature at the onset of porphyroblast nucleation can only partially explain the observed textures. Also important in determining porphyroblast size are the heating rate and the distribution of favorable nucleation sites.     

In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.