An assessment of chlorophyll-a concentration spatio-temporal variation using Landsat satellite data,in a small tropical reservoir

Traditional approaches to monitoring aquatic systems are often limited by the need for data collection which often is time-consuming, expensive and non-continuous. The aim of the study was to map the spatio-temporal chlorophyll-a concentration changes in Malilangwe Reservoir, Zimbabwe as an indicator of phytoplankton biomass and trophic state when the reservoir was full (year 2000) and at its lowest capacity (year 2011), using readily available Landsat multispectral images. Medium-spatial resolution (30 m) Landsat multispectral Thematic Mapper TM 5 and ETM+ images for May to December 1999–2000 and 2010–2011 were used to derive chlorophyll-a concentrations. In situ measured chlorophyll-a and total suspended solids (TSS) concentrations for 2011 were employed to validate the Landsat chlorophyll-a and TSS estimates. The study results indicate that Landsat-derived chlorophyll-a and TSS estimates were comparable with field measurements. There was a considerable wet vs. dry season differences in total chlorophyll-a concentration, Secchi disc depth, TSS and turbidity within the reservoir. Using Permutational multivariate analyses of variance (PERMANOVA) analysis, there were significant differences (p < 0.0001) for chlorophyll-a concentration among sites, months and years whereas TSS was significant during the study months (p < 0.05). A strong positive significant correlation among both predicted TSS vs. chlorophyll-a and measured vs. predicted chlorophyll-a and TSS concentrations as well as an inverse relationship between reservoir chlorophyll-a concentrations and water level were found (p < 0.001 in all cases). In conclusion, total chlorophyll-a concentration in Malilangwe Reservoir was successfully derived from Landsat remote sensing data suggesting that the Landsat sensor is suitable for real-time monitoring over relatively short timescales and for small reservoirs. Satellite data can allow for surveying of chlorophyll-a concentration in aquatic ecosystems, thus, providing invaluable data in data scarce (limited on site ground measurements) environments.     

Reliable estimation of orbit errors in spaceborne SAR interferometry

An approach to improve orbital state vectors by orbit error estimates derived from residual phase patterns in synthetic aperture radar interferograms is presented. For individual interferograms, an error representation by two parameters is motivated: the baseline error in cross-range and the rate of change of the baseline error in range. For their estimation, two alternatives are proposed: a least squares approach that requires prior unwrapping and a less reliable gridsearch method handling the wrapped phase. In both cases, reliability is enhanced by mutual control of error estimates in an overdetermined network of linearly dependent interferometric combinations of images. Thus, systematic biases, e.g., due to unwrapping errors, can be detected and iteratively eliminated. Regularising the solution by a minimum-norm condition results in quasi-absolute orbit errors that refer to particular images. For the 31 images of a sample ENVISAT dataset, orbit corrections with a mutual consistency on the millimetre level have been inferred from 163 interferograms. The method itself qualifies by reliability and rigorous geometric modelling of the orbital error signal but does not consider interfering large scale deformation effects. However, a separation may be feasible in a combined processing with persistent scatterer approaches or by temporal filtering of the estimates.     

Mitigating the impact of ionospheric cycle slips in GNSS observations

Processing of data from global navigation satellite systems (GNSS), such as GPS, GLONASS and Galileo, can be considerably impeded by disturbances in the ionosphere. Cycle-slip detection and correction thus becomes a crucial component of robust software. Still, dealing with ionospheric cycle slips is not trivial due to scintillation effects in both the phase and the amplitude of the signals. In this contribution, a geometry-based approach with rigorous handling of the ionosphere is presented. A detailed analysis of the cycle-slip correction process is also tackled by examining its dependence on phase and code noise, non-dispersive effects and, of course, the ionosphere. The importance of stochastic modeling in validating the integer cycle-slip candidates is emphasized and illustrated through simulations. By examining the relationship between ionospheric bias and ionospheric constraint, it is shown that there is a limit in the magnitude of ionospheric delay variation that can be handled by the cycle-slip correction process. Those concepts are applied to GNSS data collected by stations in northern Canada, and show that enhanced cycle-slip detection can lead to decimeter-level improvements in the accuracy of kinematic PPP solutions with a 30-s sampling interval. Cycle-slip correction associated with ionospheric delay variations exceeding 50 cm is also demonstrated, although there are risks with such a procedure and these are pointed out.     

Validation of Chlorophyll-a Algorithms in the Coastal Waters of Bay of Bengal Initial Validation Results from OCM-2

In this paper we report chlorophyll measurements made during an ocean colour validation cruise in April 2011 of the research vessel, Sagar Paschimi in the coastal waters of Northern Bay of Bengal. The chlorophyll-a concentration in these waters range from 0.2 to 4.0 mg/m³. Chlorophyll-a concentration from OCM-2 was estimated using the global ocean colour algorithms namely, OC2, OC3, OC4 and Chl-a algorithms respectively. OCM data was processed using the global SeaWiFS Data Analysis System (SeaDAS) in which all the above mentioned algorithms are embedded for estimating the chlorophyll-a concentration. A comparative study was made between and in-situ and satellite derived chlorophyll-a concentration. Although the matchups between in-situ and satellite data from OCM-2 were sparse, it indicates that direct application of the standard SeaWiFS algorithm-the OC4-V4 algorithm—in the coastal waters of the Bay of Bengal will underestimate chlorophyll-a by up to 30%. The results show a good correlation with an R value of 0.61 using OC2 algorithm. However, all the other global algorithms over estimate the chlorophyll-a concentration even in low chlorophyll concentration range. The comparison between in-situ and all the existing chlorophyll algorithms shows the efficiency of these algorithms for quantification of chlorophyll in coastal waters and hence the need to develop regional algorithms and fluorescence based algorithms for better quantification.     

Crop Residue Discrimination Using Ground-Based Hyperspectral Data

Crop residue has become an increasingly important factor in agriculture management. It assists in the reduction of soil erosion and is an important source of soil organic carbon (soil carbon sequestration). In recent past, remote sensing, especially narrowband, data have been explored for crop residue assessment. In this context, a study was carried out to identify different narrow-bands and evaluate the performance of SWIR region based spectral indices for crop residue discrimination. Ground based hyperspectral data collected for wheat crop residue was analyzed using Stepwise Discriminant Analysis (SDA) technique to select significant bands for discrimination. Out of the seven best bands selected to discriminate between matured crop, straw heap, combine-harvested field with stubbles and soil, four bands were from SWIR (1980, 2030, 2200, 2440 nm) region. Six spectral indices were computed, namely CAI, LCA, SINDRI, NDSVI, NDI5 and hSINDRI for crop residue discrimination. LCA and CAI showed to be best (F?>?115) in discriminating above classes, while LCA and SINDRI were best (F?>?100) among all indices in discriminating crop residue under different harvesting methods. Comparison of different spectral resolution (from 1 nm to 150 nm) showed that for crop residue discrimination a resolution of 100 nm at 2100–2300 m region would be sufficient to discriminate crop residue from other co-existing classes.     

Canadian gravimetric geoid model 2010

A new gravimetric geoid model, Canadian Gravimetric Geoid 2010 (CGG2010), has been developed to upgrade the previous geoid model CGG2005. CGG2010 represents the separation between the reference ellipsoid of GRS80 and the Earth’s equipotential surface of $W_0=62{,}636{,}855.69~\mathrm{m}^2\mathrm{s}^{-2}$ W 0 = 62 , 636 , 855.69 m 2 s ? 2 . The Stokes–Helmert method has been re-formulated for the determination of CGG2010 by a new Stokes kernel modification. It reduces the effect of the systematic error in the Canadian terrestrial gravity data on the geoid to the level below 2 cm from about 20 cm using other existing modification techniques, and renders a smooth spectral combination of the satellite and terrestrial gravity data. The long wavelength components of CGG2010 include the GOCE contribution contained in a combined GRACE and GOCE geopotential model: GOCO01S, which ranges from $-20.1$ ? 20.1 to 16.7 cm with an RMS of 2.9 cm. Improvement has been also achieved through the refinement of geoid modelling procedure and the use of new data. (1) The downward continuation effect has been accounted accurately ranging from $-22.1$ ? 22.1 to 16.5 cm with an RMS of 0.9 cm. (2) The geoid residual from the Stokes integral is reduced to 4 cm in RMS by the use of an ultra-high degree spherical harmonic representation of global elevation model for deriving the reference Helmert field in conjunction with a derived global geopotential model. (3) The Canadian gravimetric geoid model is published for the first time with associated error estimates. In addition, CGG2010 includes the new marine gravity data, ArcGP gravity grids, and the new Canadian Digital Elevation Data (CDED) 1:50K. CGG2010 is compared to GPS-levelling data in Canada. The standard deviations are estimated to vary from 2 to 10 cm with the largest error in the mountainous areas of western Canada. We demonstrate its improvement over the previous models CGG2005 and EGM2008.     

Uncovering spatiotemporal micromobility patterns through the lens of space–time cubes and GIS tools

Journal of Geographical Systems - In the past ten years, cities have experienced a burst of micromobility services as they offer a flexible transport option that allows users to cover short trips...     

Semantically Enriching an Open Source Sensor Observation Service Implementation for Accessing Heterogeneous Environmental Data Sources

Many kinds of environmental data are nowadays publicly available, but spread over the web. This article discusses using the Sensor Observation Service (SOS) standard of the Open Geospatial Consortium (OGC) as a common interface for providing data from heterogeneous sources which can be integrated to a user tailored environmental information system. In order to allow for providing user‐tailored and problem‐specific information the adjusted SOS is augmented by a semantic layer which maps the environmental information to ontology concepts. The necessary information fusion from different domains and data types lead to several specific requirements for the SOS. Addressing these requirements we have implemented a SOS which still conforms to the OGC SOS 1.0.0 standard specification. The developed SOS has been integrated in a publicly available demonstrator of our personalized environmental information system. Additionally this article discusses future consequences for the SOS, caused by the recently published SOS 2.0 specification.