Vermicomposting of domestic waste by using two epigeic earthworms (Perionyx excavatus and Perionyx sansibaricus)

The composting potential of two epigeic earthworms (P. excavatus and P. sansibaricus) was studied in 2002 to breakdown the domestic waste under laboratory conditions. The experimental container with P. sansibaricus showed maximum mineralization and decomposition rate than that of P. excavatus. Except for exchangeable K (it was higher (P = 0.004) in a container with P. excavatus), the domestic waste processed by P. sansibaricus showed about 6% more total nitrogen (P = 0.002) and about 7% more available P (P = 0.269) at the end than by P. excavatus. As compared with the initial level organic C content as well as C:N ratio showed a considerable reduction that was noted higher in substrate with P. sansibaricus than those by P. excavatus (organic C, t-test: P = 0.870; C:N ratio, t-test: P = 0.002). The growth (biomass increase) and reproduction parameters such as mean individual live weight, maximum individual growth rate (mg wt./worm/day), number of cocoons and reproduction rate (cocoon/worm/day) were higher in bedding with P. sansibaricus. The maximum earthworm mortality was in vermibed having P. sansibaricus (～50% higher than by P. excavatus) (t-test: P = 0.423), since both species did not show a drastic difference in waste mineralization rate, but comparatively, P. excavatus exhibited better growth and reproduction performance, which further support the suitability of the species for large scale vermiculture operations.     

Manganese ore deposits in Koira-Noamundi province of Iron Ore Group, north Orissa, India: In the light of geochemical signature

Several small Mn–Fe oxide and Mn-oxide ore bodies associated with Precambrian Iron Ore Group of rocks are located within Koira-Noamundi province of north Orissa, India. These deposits are classified into in situ (stratiform), remobilized (stratabound) and reworked categories based on their field disposition. Volcaniclastic/terrigenous shale in large geographic extension is associated with these ore bodies.The in situ ore bodies are characterised by cryptomelane-, romanechite- and hematite-dominating minerals, low Mn/Fe ratio (1.1) and relatively lower abundance of trace (1500–2500 ppm) constituents. In such type of deposits the stratigraphic conformity of oxides with the tuffaceous shale suggests precipitation of Mn and Fe at a time of decreased volcaniclastic/terrigenous contribution. The minor and trace elements were removed from solution by adsorption rather than by precipitation. Both Mn and Fe oxides when precipitated adsorb trace elements strongly but the partitioning of elements takes place during diagenesis. The inter-elemental relationship reveals that Cu, Co, Ni, Pb and Zn were adsorbed on precipitating hydrous Mn oxides and form manganates. Some of these elements probably get desorbed from Fe oxide because of their inability to substitute for Fe³⁺ in the lattice of its oxide. However, P, V, As and Mo were less partitioned and retained in Fe-oxide phase. Positive correlation between Al₂O₃ and SiO₂, MgO, Na₂O, TiO₂ and some traces like Li, Nb, Sc, Y, Zr, Th and U points to their contribution through volcaniclastic/terrigenous detritus of both mafic and acidic composition.The remobilized ore bodies are developed in a later stage through dissolution, remobilization and reprecipitation of Mn oxides in favorable structural weak planes under supergene environment. Increase in average Mn/Fe ratio (8) and trace content (5000–8500 ppm) by 5–2.5 orders of magnitude, respectively, or more above its abundance in adjoining/underlying protore is characteristic of these deposits. The newly formed Mn ores constituting lithiophorite, cryptomelane/romanechite and goethite get quantitatively enriched in traces like Cu, Co, Ni, Pb and Zn. Positive correlation between Mn, Li, Co and Zn is due to the formation of mineral of lithiophorite–chalcophanite group during redistribution and reconcentration of Mn oxide. P and V, which were present in Fe oxide, also get dissolved and reprecipitate with Fe oxyhydroxide in these ores. Some other elements like Y, Th and U show positive relation with Fe. This is probably due to leaching of these elements during chemical weathering of associated shale and getting re-adsorbed in Fe-oxyhydroxide phase.However, under oxidizing environment selective cations like Ba, K, etc. resorb from Mn-structure, resulting in the development of pyrolusite (Mn/Fe>20). In such transformation, trace metals from pyrolusitic structure expels out, resulting thereby in a considerable reduction in total trace value (<3000 ppm).The reworked ore bodies are allochthonous in nature and developed through a number of stages during terrain evolution and lateritisation. Secondary processes such as reworking of pre-existing crust; solution and remobilization; precipitation and cementation and transport, etc. are responsible for their development. Such deposits are usually very low in Mn/Fe ratio (3) and trace content (<2000 ppm).     

A Multifrequency Study of Five Large Radio Galaxies

We present the results of GMRT and VLA observations of five large radio sources over a wide frequency range to investigate their structural and spectral asymmetries. The hot-spot brightness ratios suggest intrinsic source asymmetries, while the spectral indices show evidence of re-acceleration of particles.     

Effect of irregular structural configuration on floor acceleration demand in hill‐side buildings

A suite of reinforced‐concrete frame buildings located on hill sides, with 2 different structural configurations, viz step‐back and split‐foundation, are analyzed to study their floor response. Both step‐back and split‐foundation structural configurations lead to torsional effects in the direction across the slope due to the presence of shorter columns on the uphill side. Peak floor acceleration and floor response spectra are obtained at each storey's center of rigidity and at both its stiff and flexible edges. As reported in previous studies as well, it is observed that the floor response spectra are better correlated with the ground response spectrum. Therefore, the floor spectral amplification functions are obtained as the ratio of spectral ordinates at different floor levels to the one at the ground level. Peaks are observed in the spectral amplification functions corresponding to the first 2 modes in the upper portion of the hill‐side buildings, whereas a single peak corresponding to a specific kth mode of vibration is observed on the floors below the uppermost foundation level. Based on the numerical study for the step‐back and split‐foundation hill‐side buildings, simple floor spectral amplification functions are proposed and validated. The proposed spectral amplification functions take into account both the buildings' plan and elevation irregularities and can be used for seismic design of acceleration‐sensitive nonstructural components, given that the supporting structure's dynamic characteristics, torsional rotation, ground‐motion response spectrum, and location of the nonstructural components within the supporting structure are known, because current code models are actually not applicable to hill‐side buildings.     

Variations of trace gases over the Bay of Bengal during the summer monsoon

In situ measurements of near-surface ozone (\(\hbox {O}_{3})\), carbon monoxide (CO), and methane (\(\hbox {CH}_{4})\) were carried out over the Bay of Bengal (BoB) as a part of the Continental Tropical Convergence Zone (CTCZ) campaign during the summer monsoon season of 2009. \(\hbox {O}_{3}\), CO and \(\hbox {CH}_{4}\) mixing ratios varied in the ranges of 8–54 ppbv, 50–200 ppbv and 1.57–2.15 ppmv, respectively during 16 July–17 August 2009. The spatial distribution of mean tropospheric \(\hbox {O}_{3}\) from satellite retrievals is found to be similar to that in surface \(\hbox {O}_{3}\) observations, with higher levels over coastal and northern BoB as compared to central BoB. The comparison of in situ measurements with the Monitoring Atmospheric Composition & Climate (MACC) global reanalysis shows that MACC simulations reproduce the observations with small mean biases of 1.6 ppbv, –2.6 ppbv and 0.07 ppmv for \(\hbox {O}_{3}\), CO and \(\hbox {CH}_{4}\), respectively. The analysis of diurnal variation of \(\hbox {O}_{3}\) based on observations and the simulations from Weather Research and Forecasting coupled with Chemistry (WRF-Chem) at a stationary point over the BoB did not show a net photochemical build up during daytime. Satellite retrievals show limitations in capturing \(\hbox {CH}_{4}\) variations as measured by in situ sample analysis highlighting the need of more shipborne in situ measurements of trace gases over this region during monsoon.     

Landscape transform and spatial metrics for mapping spatiotemporal land cover dynamics using Earth Observation data-sets

Analysis of Earth observation (EO) data, often combined with geographical information systems (GIS), allows monitoring of land cover dynamics over different ecosystems, including protected or conservation sites. The aim of this study is to use contemporary technologies such as EO and GIS in synergy with fragmentation analysis, to quantify the changes in the landscape of the Rajaji National Park (RNP) during the period of 19 years (1990–2009). Several statistics such as principal component analysis (PCA) and spatial metrics are used to understand the results. PCA analysis has produced two principal components (PC) and explained 84.1% of the total variance, first component (PC1) accounted for the 57.8% of the total variance while the second component (PC2) has accounted for the 26.3% of the total variance calculated from the core area metrics, distance metrics and shape metrics. Our results suggested that notable changes happened in the RNP landscape, evidencing the requirement of taking appropriate measures to conserve this natural ecosystem.     

Habitat evaluation for sarus crane in the Keoladeo National Park using IRS LISS III and pan merged data and GIS

The Keoladeo National Park, Bharatpur, a man-made fresh water wetland carved out of a natural depression on the floodplain of two minor tributaries of the Yamuna-Gambhir and the Banganga is the country’s finest waterfowl habitat. This important wetland was set aside as a bird sanctuary in 1956 and it was elevated to the status of a National Park in 1981. It was also designated a Ramsar site- a wetland of international importance under the Ramsar convention. This important wetland has distinction of being the only Indian wetland to be included under both the Ramsar and the World Heritage convention. The attempt has been made to evaluate the habitat of Sarus crane in the Keoladeo National Park using satellite data — IRS LISS III and PAN merged product and GIS. Geocoded data of IRS —1C LISS III of 21 March 1999 on 1: 50,000 scale and PAN data of March 17, 1999 were used to generate the vegetation cover type map and open water. The maps showing drainage, human habitations, contours, roads, etc. were prepared using the Survey of India topographical sheets and contour map of park area. Information regarding habitat parameters was collected from the existing literature and field observations. The Sarus crane mainly fed in the wetland on the rhizome ofNymphaea sp.,Scirpus tuberosus andEleocharis plantaginea. As there were changes in their habitat requirements at different seasons, the sighting of Sarus crane in each habitat were recorded along with the time and activity during observation. The most utilized habitat for the entire period of study was moderately wet grassland followed by pools. The pools were used mainly during the summer. The water depth requirement observed was between 30–40 cm and 20–40 cm. The suitability maps for Sarus crane were then generated using all remote sensing based and conventional information using rule based equations in the GIS within the Keoladeo National Park.     

At‐a‐station hydraulic geometry relations, 1: theoretical development

This paper, the first of two, hypothesizes that: (1) the temporal variation of stream power of a river channel at a given station with varying discharge is accomplished by the temporal variation in channel form (flow depth and channel width) and hydraulic variables, including energy slope, flow velocity and friction; (2) the change in stream power is distributed among the changes in flow depth, channel width, flow velocity, slope, and friction, depending on the boundary conditions that the channels has to satisfy. The second hypothesis is a result of the principle of maximum entropy and the theory of minimum energy dissipation or its simplified minimum stream power. These two hypotheses lead to families of at‐a‐station hydraulic geometry relations. The conditions under which these families of relations can occur in the field are discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Regional scale evapotranspiration estimation using satellite derived albedo and surface temperature

In the studies reteted to surface energy balance, satellite data provides important inputs for estimating regional surface albedo and evapotranspiration. The paper describes the use of satellite data in determining the surface emissivity over heterogeneous a’reas by taking Normalized Difference Vegetation Index (NDVI) as modulating parameter at pixel resolution. The estimated emissivity values have been used to find the surface temperature at the pixel scale. Landsat-TM-visible, NIR, TIR bands data and some ground meteorological data have been used in an energy balance model for estimating surface albedo and evapotranspiration. The ET values derived from the model are in good agreement with the values obtained with. ‘CENTURY MODEL’ and ground observations over the area, suggesting the possible use of this approach fot regional scale studies on evapotranspiration.