流体在岩浆型铬铁矿和铂族元素成矿过程中的作用及意义

镁铁- 超镁铁岩是揭示地幔物质组成和壳幔相互作用的重要窗口，也是Ni- Cu- PGE- Cr等金属矿产资源的重要载体。不同的镁铁- 超镁铁岩体赋矿特征明显不同：蛇绿岩以产出铬铁矿床为特征，阿拉斯加型岩体主要赋含铂族元素(PGE)矿床，大型层状岩体则可同时产出铬铁矿床、PGE矿床和Cu- Ni硫化物矿床。这种成矿差异显然与赋矿岩体形成的构造背景、母岩浆经历的岩浆演化过程有关，但缺少关键控制因素的研究。前人对上述不同种类矿床的研究工作主要集中于地幔源区的部分熔融、上升过程中或岩浆房内的围岩混染和结晶分异等岩浆过程，而极少关注流体作用。近年来，实验岩石学和岩石地球化学的研究均表明幔源岩浆演化过程中的流体活动可能对成矿元素的富集迁移起到至关重要的作用，同时这些成矿元素的赋存状态和分配系数也在不断更新。厘清Cr和PGE在熔体演化——尤其是流体出溶过程中的地球化学行为，刻画并揭示其迁移富集、分离和再富集的成矿过程及控制因素，已成为当前岩浆矿床研究的热点。本文围绕富水流体与铬铁矿和PGE成矿关系的科学问题，总结了不同镁铁- 超镁铁岩体的成矿差异以及铬铁矿和PGE矿床成矿过程中的流体活动记录，提出流体性质和组分对铬铁矿和PGE迁移富集的控制作用，强调有必要开展蛇绿岩、大型层状镁铁- 超镁铁岩体和阿拉斯加型岩体的对比研究。     

中国南方离子吸附型稀土矿床成矿类型及其母岩控矿因素探讨

传统认为中国南方的离子吸附型稀土矿床可划分为以“足洞式”为代表的重稀土型和以“河岭式”(或“花山式”)为代表的轻稀土型两种矿化类型。然而，近年来发现的许多矿床(如清溪、寨背和馒头山等)的赋矿风化壳中出现了轻稀土矿与重稀土矿并存现象，表现出特殊的“上轻下重”双层矿体结构。这指示了除重稀土型和轻稀土型之外，还存在着轻重稀土共生型的过渡类型。本研究通过对三种不同成矿类型的若干典型矿床系统对比，指出成矿类型的多样性与母岩性质密切相关，尤其是母岩的稀土元素地球化学和稀土载体矿物属性是制约成矿类型变化的关键因素。统计数据表明，从重稀土型→轻重稀土共生型→轻稀土型，成矿母岩的全岩稀土总量变化不大(ΣREY: 200×10-6~450×10-6→200×10-6~500×10-6→200×10-6~800×10-6)，但轻重稀土配分值出现较显著的区间性差异(ΣLREE/ΣHREY: 02~1→1~5→2~10)。与之同时，母岩中能为离子相稀土提供物源且具有重稀土配分属性的稀土副矿物类型和数量明显减少，这与全岩稀土元素地球化学特征中重稀土分量占比的降低趋势也互相匹配。该结果指示，以往认为重稀土配分母岩形成重稀土矿床、轻稀土配分母岩形成轻稀土矿床的传统观点需要外延，即一部分具有低度轻稀土配分属性(1＜ΣLREE/ΣHREY＜5)且含有丰富易风化稀土副矿物的母岩还可能形成轻重稀土共生型矿床，该认识可为今后离子吸附型稀土矿床勘查工作提供新的找矿依据。     

高原大地形及海洋热力强迫对东亚及北半球环流和气候变化影响的观测研究

本文总结了“青藏高原大地形及西太平洋暖池势力强迫对东亚及全球气候变化的影响”专题五年来的主要研究工作。其中包括青世故高原东部大气热源的时间演变特征,夏半年高原热源异常对我国降水和北半球环流的影响;西沙海温变化特征及其与我南方降水的关系,北太平洋海温主因子特征及其与华南前汛期降水的变化。     

Structure and oscillations in quiescent filaments from observations in He i λ10830 å

Observations of two quiescent filaments show oscillatory variations in Doppler shift and central intensity of the He i 10830 Å line.The oscillatory periods range from about 5 to 15 min, with dominant periods of 5, 9, and 16 min. The 5-min period is also detected in the intensity variations, after correction for atmospheric effects. Doppler shifts precede intensity variations by about one period. The possibility that the oscillations are Alfvén waves is discussed.The Doppler signals of the filament form fibril-like structures. The fibrils are all inclined at an angle of about 25° to the long axis of the filament. The magnetic field has a similar orientation relative to the major direction of the filament, and the measured Doppler signals are apparently produced by motions along magnetic flux tubes threading the filament.The measured lifetimes of the small-scale fibrils of quiescent disk filaments are very likely a combined effect of intensity modulations and reshuffling of the structures.     

使用价值分析优化方法在功能—技术矩阵求解中的应用

功能—技术矩阵,经众多工作者的努力研究,已渐趋成熟与实用。但如何利用功能—技术矩阵构造在广义现代设计领域中适用的科学模式,解决多学科设计方案的组成与评价问题,还存在薄弱环节。本文利用“使用价值分析优化”的概念,从设计方案技术先进性和经济合理性的协调统一的角度出发,较好地实现了功能—技术矩阵可行优化组合链的组成与评价,弥补了以往的缺陷。     

Study on the kinetics of iron oxide leaching by oxalic acid

The presence of iron oxides in clay or silica raw materials is detrimental to the manufacturing of high quality ceramics. Although iron has been traditionally removed by physical mineral processing, acid washing has been tested as it is more effective, especially for extremely low iron (of less than 0.1% w/w). However, inorganic acids such as sulphuric or hydrochloric acids easily contaminate the clay products with SO₄²⁻ and Cl⁻, and therefore should be avoided as much as possible. On the other hand, if oxalic acid is used, any acid left behind will be destroyed during the firing of the ceramic products. The characteristics of dissolution of iron oxides were therefore investigated in this study.The dissolution of iron oxides in oxalic acid was found to be very slow at temperatures within the range 25–60 °C, but its rate increases rapidly above 90 °C. The dissolution rate also increases with increasing oxalate concentration at the constant pH values set within the optimum range of pH2.5–3.0. At this optimum pH, the dissolution of fine pure hematite (Fe₂O₃) (105–140 μm) follows a diffusion-controlled shrinking core model. The rate expression expressed as 1 − (2 / 3)x − (1 − x)^2 / 3 where x is a fraction of iron dissolution was found to be proportional to [oxalate]^1.5.The addition of magnetite to the leach liquor at 10% w/w hematite was found to enhance the dissolution rate dramatically. Such addition of magnetite allows coarser hematite in the range 0.5–1.4 mm to be leached at a reasonable rate.     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.     

Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.     

我国煤炭资源开发利用中某些问题的探讨

针对我国煤炭资源开发利用中存在的诸如煤炭资源的低效率应用、无序开采、生态环境恶化等问题，指出了我国煤炭资源管理法规中存在的问题，提出了加强煤炭资源开发管理、构建煤炭循环经济体系、加大安全投入、加强煤炭矿区环境的治理和保护、健全有偿使用资源法规制度等对策。