延边地区天宝山多金属矿田的流体特征与成矿模式

天宝山铅锌铜钼多金属矿田由新兴铅-锌矿床、东风铅-锌-铜-钼矿床和立山铜-铅-锌矿床组成,它们分别产在侏罗纪黑云母花岗闪长岩、闪长岩与古生代海相火山-沉积岩的接触带和岩体内部。矿床地质特征研究表明:新兴铅-锌矿床以石英硫化物充填胶结角砾岩筒矿体为特征,具有与中温岩浆热液矿床类似的蚀变特征;东风铅-锌-铜-钼矿床以发育浸染状硫化物、石英硫化物脉和辉钼矿石英脉为特征,具有接触交代热液矿床特征;立山铜-铅-锌矿床则以磁铁矿、方铅矿和闪锌矿等多金属硫化物矿化发育为特征,具有典型的接触交代矽卡岩型矿床特征。对主成矿阶段以及成矿晚阶段的脉石矿物石英流体包裹体研究揭示:新兴铅-锌矿床的石英-黄铁矿阶段、石英-闪锌矿-方铅矿-黄铜矿多金属硫化物阶段和石英-碳酸盐阶段对应的温度分别为270～340℃、190～260℃、130～160℃;盐度(w(NaCl))和密度分别为0.62%～9.86%和0.37～1.00g/cm3;压力为37.31～87.69MPa;激光拉曼光谱分析获得流体包裹体的成分主要为CO2、H2O,含有少量的CH4和N2。东风铅-锌-铜-钼矿床的石英-辉钼矿阶段、石英-闪锌矿-方铅矿-黄铜矿多金属硫化物阶段和石英-碳酸盐阶段对应的温度分别为280～337℃、200～260℃、101～190℃;盐度和密度分别为7.16%～23.95%和0.96～1.12g/cm3;压力为28.23～56.64MPa;激光拉曼光谱分析获得流体包裹体成分为H2O。立山铜-铅-锌矿床的磁铁矿-石英脉阶段、石英-方铅矿-闪锌矿-黄铜矿等多金属硫化物和石英-碳酸盐阶段对应的温度分别为210～240℃、170～200℃、126～160℃,盐度和密度分别为2.07%～9.47%和0.89～0.92g/cm3;压力为33.88～59.72 MPa;激光拉曼光谱分析获得流体包裹体成分为CO2和CH4。基于矿床地质特征、成矿流体性质和来源等方面的讨论,建立了天宝山多金属矿田的成矿模式。     

国产GTS1探空仪与VAISALA公司RS92探空仪对比分析

文章从静态指标与动态对比两个方面,对中国国产GTS1探空仪与芬兰Vaisala公司RS92探空仪的综合性能进行对比.对比结果表明,GTS1探空仪温度存在滞后误差,RS92探空仪湿度测量结果明显好于GTS1探空仪,200hPa以上RS92探空仪气压变化低于GTS1探空仪,测风精度方面RS92探空仪高于GTS1探空仪,850hPa以下和150hPa以上GTS1探空仪测风与RS92探空仪存在1m·s-1以内的系统差,RS92探空仪在整体性能上高于GTS1探空仪.     

U-Pb dating of scheelite,wolframite and apatite from the Woxi Au-Sb-W deposit,western Hunan Province and their geological significanceSCIEI北大核心CSCD

沃溪矿床位于湘西雪峰隆起区的转折部位,是该区金锑钨矿床的典型代表。该矿床成矿元素及成矿期次较为复杂,各成矿阶段的形成时代长期存在争议。本次研究在对沃溪矿床详细野外调查及岩相学观察的基础上,对深部中段矿体中的白钨矿、磷灰石及浅部中段矿体中的黑钨矿开展了U-Pb同位素分析。依据本次所获年龄数据,结合观察到的矿脉交切关系、矿物共生组合等特征,本文认为沃溪矿床除了加里东期成矿作用之外,还存在燕山期成矿作用。其中,白钨矿形成相对较早,成矿年龄为149.0±12Ma、144.8±1.7Ma、139.8±6.1Ma;黑钨矿与白钨矿同时生成(或稍晚),成矿年龄为137.8±3.9Ma、134.8±5.1Ma;自然金、辉锑矿主要在白钨矿、黑钨矿形成以后通过沉淀而成,且自然金在晚阶段(125.8±5.6Ma、123.8±4.6Ma)石英-碳酸盐脉中仍有少量产出。综合已有年代学资料推测,沃溪矿床可能在经历了加里东期陆内造山成矿作用之后,还经受了燕山期伸展构造背景下深部流体不同程度的叠加改造作用。而该矿床发现的矿脉原地破裂后被后期矿物胶结等现象,则指示其矿脉的形成与液压致裂作用有关,这种作用导致矿脉反复裂开-愈合,有利于成矿元素(尤其是金)的活化迁移和再富集沉淀。     

Club convergence and spatial distribution dynamics of carbon intensity in China’s construction industry

Climate change caused by carbon emissions continuously threatens sustainable development. Due to China’s immense territory, there are remarkable regional differences in carbon emissions. The construction industry, which has strong internal industrial differences, further leads to carbon emission disparity in China. Policymakers should consider spatial effects and attempt to eliminate carbon emission inequality to promote the sustainable development of the construction industry and realize emission reduction targets. Based on the classic Markov chain and spatial Markov chain, this paper investigates the club convergence and spatial distribution dynamics of China’s carbon intensity in the construction industry from 2005 to 2014. The results show that the provincial carbon intensity in the construction industry is characterized by “convergence clubs” during the research period, and very low-level and very high-level convergence clubs have strong stability. Moreover, the carbon intensity class transitions of provinces tend to be consistent with that of their neighbors. Furthermore, the transition of carbon intensity types is highly influenced by their regional backgrounds. The provinces with high carbon emissions have a negative influence on their neighbors, whereas the provinces with low carbon emissions have a positive influence. These analyses provide a spatial interpretation to the “club convergence” of carbon intensity.     

GPS卫星轨道精度对定位结果的影响

卫星轨道误差是影响定位精度的重要误差源,在轨道精度、表示方式和实时性等方面对广播星历、超快速星历、快速星历和精密星历进行了比较分析,得出广播星历与精密星历所提供的卫星轨道相差较大,超快速星历居中,快速星历轨道与精密轨道接近,在测量设备的高精度比对鉴定中,满足不同试验需求对卫星星历的选择提供了依据。     

基于GIS技术的地质灾害风险分析系统研究

地质灾害的社会经济属性决定了对其规律的研究应有别于传统的工程地质学研究 ,从社会属性方面来分析地质灾害具有更大的社会经济效益。地质灾害的危险性和受威胁对象的易损性是控制地质灾害风险评价的基本条件 ,对这两者的分析评价称作地质灾害危险性评价和社会经济易损性评价。GIS技术支持下的地质灾害风险分析代表着地质灾害研究领域的一个重要发展方向。经过多年研究 ,作者开发出了基于商业GIS软件的区域地质灾害风险分析系统 (RiskAnly)。本文介绍了该系统的设计思路、基本结构和工作过程 ,并利用此系统对我国全国范围的滑坡灾害进行了危险性分析、区域社会经济易损性分析和最终的风险评估。     

2022年6月1日四川芦山MS6.1地震的发震构造与力学机制探讨

2022年6月1日17时00分08秒（北京时间）四川雅安市芦山县发生M_S6.1地震,此次地震是继2008年汶川M_S8.0、2013年芦山M_S7.0地震后发生在龙门山断裂带的又一显著地震,与后者在空间上仅相距9 km.为揭示此次地震的发震构造特征及其与2013年芦山M_S7.0地震的关系,进而理解龙门山断裂带强震孕育动力学过程与地震危险性,本文采用CAP全波形反演方法计算了芦山M_S6.1地震的震源机制解,利用多阶段定位法对2013年芦山M_S7.0地震以来余震区地震进行了精确定位,并基于库仑应力讨论两次地震的应力触发关系.结果显示,芦山M_S6.1地震的震源机制解为：节面Ⅰ的走向、倾角和滑动角分别为221°、40°和105°;节面Ⅱ的参数为22°、52°和78°,矩心深度14 km,震源机制断层面解呈现一组与龙门山断裂带性质接近的节面.反演给出的P轴方位角为120°,倾角为6°,反映了此次地震主要受NWW-SEE向水平挤压应力作用,与龙门山断裂带南段背景构造应力场一致.地震精定位结果显示芦山M_S6.1地震序列发生在2013年芦山M_S7.0地震发震断层北西侧的一条倾向南东的反冲断层上,据此可判断震源机制解的节面Ⅱ为发震断层面.在此基础上,通过指定发震与接收断层,计算获得2013年芦山M_S7.0地震对此次M_S6.1地震所在断层的最大库仑应力加载值可达1.5 MPa,说明前者对后者有显著的触发作用.

     

遥感技术在化工环境保护中的应用

遥感技术获取的可见光、红外及微波信息，可以对化工企业及化学矿山环境污染（水、粉尘、大气、废渣污染等）及环境地质灾害（滑坡、泥石流、地面塌陷等）进行实时动态监测，并可获得较高的社会经济效益，达到地面环保及常规环境地质工作难以达到的效果。特别是对重点大中型化工企业及化学矿山建立环境遥感信息动态监测系统，可以为国家决策部门及时准确地提供环境治理和改造的依据。     

Deep Structure and Dynamics of Passive Continental Margin from Shelf to Ocean of the Northern South China Sea

To study the deep dynamic mechanism leading to the difference in rifting pattern and basin structure from shelf to oceanic basin in passive continental margin,we constructed long geological sections across the shelf,slope and oceanic basin using new seismic data.Integrated gravity-magnetic inversion and interpretation of these sections were made with the advanced dissection method.Results show that the basement composition changes from intermediate-acid intrusive rocks in the sheff to intermediate-basic rocks in the slope.The Moho surface shoals gradually from 31 km in the sheff to 22.5 km in the uplift and then 19 km in the slope and finally to 13 km in the oceanic basin.The crust thickness also decreases gradually from 30 km in the northern fault belt to 9 km in the oceanic basin.The crustal stretching factor increases from the shelf toward the oceanic basin,with the strongest extension under the sags and the oceanic basin.The intensity of mantle upwelling controlled the style of basin structures from sheff to oceanic basin.In the Zhu 1 depression on the shelf,the crust is nearly normal,the brittle and cold upper crust mainly controlled the fault development;so the combinative grabens with single symmetric graben are characteristic.In the slope,the crust thinned with a large stretching factor,affected by the mantle upwelling.The ductile deformation controlled the faults,so there developed an asymmetric complex graben in the Baiyun (白云) sag.     

Antialgal and antilarval activities of bioactive compounds extracted from the marine dinoflagellate <Emphasis Type="Italic">Amphidinium carterae</Emphasis>

With the global ban on the application of organotin-based marine coatings by the International Maritime Organization, the development of environmentally friendly, low-toxic and nontoxic antifouling compounds for marine industries has become an urgent need. Marine microorganisms have been considered as a potential source of natural antifoulants. In this study, the antifouling potential of marine dinoflagellate Amphidinium carterae, the toxic and red-tide microalgae, was investigated. We performed a series of operations to extract the bioactive substances from Amphidinium carterae and tested their antialgal and antilarval activities. The crude extract of Amphidinium carterae showed significant antialgal activity and the EC₅₀ value against Skeletonema costatum was 55.4 μg mL^?1. After purification, the isolated bioactive substances (the organic extract C) exhibited much higher antialgal and antilarval activities with EC₅₀ of 12.9 μg mL^?1 against Skeletonema costatum and LC₅₀ of 15.1 μg mL^?1 against Amphibalanus amphitrite larvae. Subsequently, IR, Q-TOFMS, and GC-MS were utilized for the structural elucidation of the bioactive compounds, and a series of unsaturated and saturated 16- to 22-carbon fatty acids were detected. The data suggested the bioactive compounds isolated from Amphidinium carterae exhibited a significant inhibiting effect against the diatom Skeletonema costatum and Amphibalanus amphitrite larvae, and could be substitutes for persistent, toxic antifouling compounds.