A nonstationary parameter model for the sandstone creep tests

The rock masses of hydro-fluctuation belt experience seepage pressure following impoundment in the Three Gorges Reservoir; its creep behaviors are significant for reservoir bank slopes. To study the creep behaviors under seepage pressure (0, 1.45, and 1.75 MPa), we performed creep tests using representative landslide sandstone in the Three Gorges Reservoir and investigated the sandstone creep behaviors under the coupling effects of seepage pressure and stress. Previous researches on rocks have usually regarded the creep constitutive parameter as a constant; however, in this study, a nonlinear, nonstationary, plastic-viscous (NNPV) creep model which can describe the curve of sandstone creep tests is proposed. The rock-creep parameters under three levels of seepage pressure were identified, and theoretical curves using the NNPV model agreed well with the experimental data, indicating that the new model cannot only describe the primary creep and secondary creep stages under varying seepage pressures but also, in particular, perfectly describes the tertiary creep stage. Finally, the sensitivity of the NNPV model parameters is analyzed, and the result shows that the nonstationary coefficient α and the nonlinear coefficient m are main parameters affecting the tertiary creep stage.     

Assessing rockfall susceptibility in steep and overhanging slopes using three-dimensional analysis of failure mechanisms

Rockfalls strongly influence the evolution of steep rocky landscapes and represent a significant hazard in mountainous areas. Defining the most probable future rockfall source areas is of primary importance for both geomorphological investigations and hazard assessment. Thus, a need exists to understand which areas of a steep cliff are more likely to be affected by a rockfall. An important analytical gap exists between regional rockfall susceptibility studies and block-specific geomechanical calculations. Here we present methods for quantifying rockfall susceptibility at the cliff scale, which is suitable for sub-regional hazard assessment (hundreds to thousands of square meters). Our methods use three-dimensional point clouds acquired by terrestrial laser scanning to quantify the fracture patterns and compute failure mechanisms for planar, wedge, and toppling failures on vertical and overhanging rock walls. As a part of this work, we developed a rockfall susceptibility index for each type of failure mechanism according to the interaction between the discontinuities and the local cliff orientation. The susceptibility for slope parallel exfoliation-type failures, which are generally hard to identify, is partly captured by planar and toppling susceptibility indexes. We tested the methods for detecting the most susceptible rockfall source areas on two famously steep landscapes, Yosemite Valley (California, USA) and the Drus in the Mont-Blanc massif (France). Our rockfall susceptibility models show good correspondence with active rockfall sources. The methods offer new tools for investigating rockfall hazard and improving our understanding of rockfall processes.     

Study of late-Mesozoic magmatic rocks and their related copper-gold-polymetallic deposits in the Guichi ore-cluster district,Lower Yangtze River Metallogenic Belt,East China

ABSTRACT

The Guichi ore-cluster district in the Lower Yangtze River Metallogenic Belt hosts extensive Cu–Au–Mo polymetallic deposits including the Tongshan Cu–Mo, Paodaoling Au, Matou Cu–Mo, Anzishan Cu–Mo, Guilinzheng Mo and Zhaceqiao Au deposits, mostly associated with the late Mesozoic magmatic rocks, which has been drawn to attention of study and exploration. However, the metallogenic relationship between magmatic rocks and the Cu–Au-polymetallic deposits is not well constrained. In this study, we report new zircon U–Pb ages, Hf isotopic, and geochemical data for the ore-bearing intrusions of Guichi region. LA-ICP-MS U–Pb ages for the Anzishan quartz diorite porphyrite is 143.9 ± 1.0 Ma. Integrated with previous geochronological data, these late Mesozoic magmatic rocks can be subdivided into two stages of magmatic activities. The first stage (150–132 Ma) is characterized by high-K calc-alkaline intrusions closely associated with Cu–Au polymetallic ore deposits. Whereas, the second stage (130–125 Ma) produced granites and syenites and is mainly characterized by shoshonite series that are related to Mo–Cu mineralization. The first stage of magmatic rocks is considered to be formed by partial melting of subducted Palaeo-Pacific Plate, assimilated with Yangtze lower crust and remelting Meso-Neoproterozoic crust/sediments. The second stage of magmatism is originated from partial melting of Mesoproterozoic-Neoproterozoic crust, mixed with juvenile crustal materials. The depression cross to the uplift zone of the Jiangnan Ancient Continent forms a gradual transition relation, and the hydrothermal mineralization composite with two stages have certain characteristics along the regional fault (Gaotan Fault). Guichi region results from two episodes of magmatism probably related to tectonic transition from subduction of Palaeo-Pacific Plate to back-arc extensional setting between 150 and 125 Ma, which lead to the Mesozoic large-scale polymetallic mineralization events in southeast China.     

Rainfall threshold determination for flash flood warning in mountainous catchments with consideration of antecedent soil moisture and rainfall pattern

Flash flood disaster is a prominent issue threatening public safety and social development throughout the world, especially in mountainous regions. Rainfall threshold is a widely accepted alternative to hydrological forecasting for flash flood warning due to the short response time and limited observations of flash flood events. However, determination of rainfall threshold is still very complicated due to multiple impact factors, particular for antecedent soil moisture and rainfall patterns. In this study, hydrological simulation approach (i.e., China Flash Flood-Hydrological Modeling System: CNFF-HMS) was adopted to capture the flash flood processes. Multiple scenarios were further designed with consideration of antecedent soil moisture and rainfall temporal patterns to determine the possible assemble of rainfall thresholds by driving the CNFF-HMS. Moreover, their effects on rainfall thresholds were investigated. Three mountainous catchments (Zhong, Balisi and Yu villages) in southern China were selected for case study. Results showed that the model performance of CNFF-HMS was very satisfactory for flash flood simulations in all these catchments, especially for multimodal flood events. Specifically, the relative errors of runoff and peak flow were within?±?20%, the error of time to peak flow was within?±?2 h and the Nash–Sutcliffe efficiency was greater than 0.90 for over 90% of the flash flood events. The rainfall thresholds varied between 93 and 334 mm at Zhong village, between 77 and 246 mm at Balisi village and between 111 and 420 mm at Yu village. Both antecedent soil moistures and rainfall temporal pattern significantly affected the variations of rainfall threshold. Rainfall threshold decreased by 8–38 and 0–42% as soil saturation increased from 0.20 to 0.50 and from 0.20 to 0.80, respectively. The effect of rainfall threshold was the minimum for the decreasing hyetograph (advanced pattern) and the maximum for the increasing hyetograph (delayed pattern), while it was similar for the design hyetograph and triangular hyetograph (intermediate patterns). Moreover, rainfall thresholds with short time spans were more suitable for early flood warning, especially in small rural catchments with humid climatic characteristics. This study was expected to provide insights into flash flood disaster forecasting and early warning in mountainous regions, and scientific references for the implementation of flash flood disaster prevention in China.     

序贯高斯模拟在矿石品位估计中的应用研究

随机模拟是地质统计方法的重要内容。在矿石品位估计方法中克里格方法作为一种无偏估计方法,常被用于矿石品位的估计。但克里格法估值存在平滑效应。作者在分析序贯高斯模拟和普通克里格法基本原理的基础上,运用序贯高斯模拟方法和普通克里格方法对某铁矿体内全铁(TFe)品位进行估计,给出了品位估计结果模型。研究从勘探线方向、垂直勘探线方向和竖直方向分别计算变差函数,对球状模型、指数模型、高斯模型的变差函数拟合效果进行了优选,结果表明球型模型拟合效果最好。针对序贯模拟和克里格品位估值效果进行了分析,结果显示:序贯高斯模拟结果在品位分布形态上更接近样品品位分布形态,其平滑效应更小;克里格方法估计与序贯高斯模拟方法相比仅在品位均值方面更接近样本品位均值。因此,认为序贯高斯模拟方法可以更好地刻画矿体内品位分布状态。     

准噶尔腹部火山岩风化壳储层特征及其影响因素

文章通过大量岩芯、铸体薄片观察和测井资料分析,对准噶尔腹部石西石炭系火山岩风化壳储层进行了详细地研究。研究结果表明,该火山岩风化壳储层的储集空间主要有基质溶孔、气孔或杏仁体溶孔、角砾间溶孔、微裂缝和裂缝等,其中与裂缝连通的各类溶孔占主导地位;在岩石分布上以集块岩、条带状熔岩、角砾熔岩和致密凝灰岩为主,玄武岩、安山岩和流纹岩则相对较少;储层物性主要表现为高孔低渗,只有裂缝具有较高的渗透率,且裂缝以高角度缝和直立缝为主。研究还发现,岩性岩相、裂缝和风化淋滤作用是影响该风化壳储层的主要因素。区内油层主要聚中在构造高部位、靠近断裂带和有利岩相区域;油层分布在离石炭系风化壳顶面25~150 m的范围内。     

遵义市袋栽黑木耳最佳栽培期气候条件分析*

为了找出黑木耳在遵义的最佳栽培期,2019年笔者在遵义市气象观测站开展试验,收集并整理黑木耳生长期内逐日气象资料,结合试验数据综合分析,结果显示：（1）平均气温在20℃左右时,对木耳品质形成较为有利,候平均气温＜5℃或≥30℃时不适宜黑木耳生长。（2）除盛夏和初秋相对湿度较低外,其余大部分时段均能满足木耳自然生长,少部分时段需适当浇水。（3）3月至10月候日照时数普遍在10小时以上,适宜黑木耳生长,其中4月4候至9月4候为最适宜期。（4）遵义立体气候特征明显,海拔高度不同木耳适宜生长期时段不同,大部分地区海拔普遍在600～1100米之间,黑木耳生长最佳适宜期为4月3候至6月6候、8月6候至10月5候。     

An improved ionosphere interpolation algorithm for network RTK in low-latitude regions

A traditional interpolation algorithm with the linear interpolation method (LIM) using a fixed number of reference stations is widely used in network RTK to obtain the ionospheric delays for the users. In low-latitude regions, where the ionosphere is relatively active, however, large interpolation errors exist, especially for satellites at low elevation angles. Considering the characteristics of “coinciding ionospheric pierce points (CIPPs)” with a similar nature of ionospheric delays, an improved interpolation algorithm is proposed. In this algorithm, all stations with CIPPs are used to establish the interpolation model; thus, more precise interpolation model is achieved. To validate the performance of the proposed algorithm, data from some reference stations in Guangdong Province of China were used, and the results are compared with those with the traditional interpolation algorithm. Numerical analysis shows that the interpolation accuracy of the proposed algorithm increases by 10–30% compared with the traditional one. Since the number of reference stations is flexible, the proposed algorithm can also balance the model accuracy with the computation burdens. In addition, the proposed algorithm is less affected by the selection of master reference station. In terms of network RTK on-the-fly positioning, the time-to-first-fix is reduced when replacing the traditional interpolation algorithm with the proposed one.     

综合单点和点簇的建筑物点云分类方法

在单点分类方面主要对分类特征进行了比较全面的分析和综合,而在点簇分类方面则依据建筑物的实际形态提出了一种高效的基于决策树的分类法则。综合性方法是上述两种方法的配合使用,首先利用单点分类提高精度,再利用点簇分类提高可用性。实验结果表明,综合方法不仅有着非常高的精度,并且其结果方便后期利用。     

内蒙古平安地元古代构造混杂岩的发现与地质意义

正研究区位于内蒙古东部天山镇西平安地地区,古生代大地构造位置由南向北可划分为华北板块、白乃庙岛弧和索伦—林西缝合带(图1)。Xiao等(2015)和Jian等(2012)等认为温都尔庙—柯丹山—西拉木伦蛇绿混杂岩带是华北板块和西伯利亚板块的缝合带,研究区则位于该混杂岩带以南白乃庙岛弧一侧。