Discrimination of Spectrally-Close Crops Using Ground-Based Hyperspectral Data

Hyperspectral remote sensing, because of its large number of narrow bands, has shown possibility of discriminating the crops. Current study was carried out to select the optimum bands for discrimination among pulses, cole crops and ornamental plants using the ground-based Hyperspectral data in Patha village, Lalitpur district, Uttar Pradesh state and Kolkata, West Bengal state. The field observations of reflectance were taken using a 512-channel spectroradiometer with a range of 325–1075 nm. The stepwise discriminant analysis was carried out and separability measures, such as Wilks’ lambda and F-Value were used as criteria for identifying the narrow bands. The analysis showed that, the best four bands for pulse crop discrimination lie mostly in NIR and early MIR regions i.e. 750, 800, 940 and 960 nm. Within cole crops discrimination is primarily determined by the green, red and NIR bands of 550, 690, 740, 770 and 980 nm. The separability study showed the bands 420,470,480,570,730,740, 940, 950, 970, 1030 nm are useful for discriminating flowers.     

Universal time from VLBI single-baseline observations during CONT08

The IVS Intensive sessions are single-baseline, 1-h VLBI sessions carried out everyday in order to determine Universal Time (UT1). We investigate different possibilities to improve the results of such sessions. We do this investigation by extracting 2-h single-baseline sessions from the CONT08 data set. These are analysed like normal Intensives, and the results are compared to the results of the analysis of the full CONT08 data set. We find that tropospheric asymmetry is the major error source for the single-baseline sessions. It is possible to improve the accuracy of the estimated UT1 either by using accurate a priori tropospheric gradients or by estimating gradients in the data analysis.     

Hyperspectral Radiometry to Quantify the Grades of Iron Ores of Noamundi and Joda Mines,Eastern India

This paper present the results of a preliminary study to assess the potential of the visible, NIR and SWIR energy of the EMR in differentiating iron ores of different grades in a rapid manner using hyperspectral radiometry. Using different iron ore samples from Noamundi and Joda mines, Jharkhand and Orissa, states of India, certain spectro-radiometric measurements and geochemical analysis were carried out and the results have been presented. It was observed that the primary spectral characteristics of these iron ores lie in the 850 to 900 nm and 650–750 nm regions. The spectral parameters for each curve used for studying the iron ores are: (i) the slopes of the spectral curve in 685–725 nm region; (ii) position of the peak with respect to wavelength in 730–750 nm region and (iii) radius of curvature of the absorption trough in the 850–900 nm region. Comparison of these spectral parameters and the geochemistry of the samples indicates that the position of the peak of the curve in 730–750 nm region shifts towards longer wavelength with increasing iron oxide content, while the slope of the curvature in the 685–725 nm region has a strong negative correlation with the iron oxide content of the samples. Similarly, a strong negative correlation is observed between the radius of curvature of the 850–900 nm absorption trough and the iron oxide content. Such strong correlations indicate that hyperspectral radiometry in the visible and NIR regions can give a better estimate and quantification of the grades of iron ores. This study has demonstrated that generation of empirical models using hyperspectral radiometric techniques is helpful to quantify the grade of iron ores with limited geochemical analysis.     

Analysis of Seasonal Variability of Vegetation and Methane Concentration over India using SPOT-VEGETATION and ENVISAT-SCIAMACHY Data

This paper highlights the spatial and temporal variability of atmospheric columnar methane (CH₄) concentration over India and its correlation with the terrestrial vegetation dynamics. SCanning IMaging Absorption spectrometer for Atmospheric CHartographY (SCIAMACHY) on board ENVIronmental SATellite (ENVISAT) data product (0.5° × 0.5°) was used to analyze the atmospheric CH₄ concentration. Satellite Pour l'Observation de la Terre (SPOT)-VEGETATION sensor’s Normalized Difference Vegetation Index (NDVI) product, aggregated at 0.5° × 0.5° grid level for the same period (2004 and 2005), was used to correlate the with CH₄ concentration. Analysis showed mean monthly CH₄ concentration during the Kharif season varied from 1,704 parts per billion volume (ppbv) to 1,780 ppbv with the lowest value in May and the highest value in September. Correspondingly, mean NDVI varied from 0.28 (May) to 0.53 (September). Analysis of correlation between CH₄ concentration and NDVI values over India showed positive correlation (r = 0.76; n = 6) in Kharif season. Further analysis using land cover information showed characteristic low correlation in natural vegetation region and high correlation in agricultural area. Grids, particularly falling in the Indo-Gangetic Plains showed positive correlation. This could be attributed to the rice crop which is grown as a predominant crop during this period. The CH₄ concentration pattern matched well with growth pattern of rice with the highest concentration coinciding with the peak growth period of crop in the September. Characteristically low correlation was observed (r = 0.1; n = 6) in deserts of Rajasthan and forested Himalayan ecosystem. Thus, the paper emphasizes the synergistic use of different satellite based data in understanding the variability of atmospheric CH₄ concentration in relation to vegetation.     

Comparison of Two Data Smoothing Techniques for Vegetation Spectra Derived From EO-1 Hyperion

Hyperspectral data are generally noisier compared to broadband multispectral data because their narrow bandwidth can only capture very little energy that may be overcome by the self-generated noise inside the sensors. It is desirable to smoothen the reflectance spectra. This study was carried out to see the effect of smoothing algorithms - Fast-Fourier Transform (FFT) and Savitzky–Golay (SG) methods on the statistical properties of the vegetation spectra at varying filter sizes. The data used in the study is the reflectance spectra data obtained from Hyperion sensor over an agriculturally dominated area in Modipuram (Uttar Pradesh). The reflectance spectra were extracted for wheat crop at different growth stages. Filter sizes were varied between 3 and 15 with the increment of 2. Paired t-test was carried out between the original and the smoothed data for all the filter sizes in order to see the extent of distortion with changing filter sizes. The study showed that in FFT, beyond filter size 11, the number of locations within the spectra where the smooth spectra were statistically different from its original counterpart increased to 14 and reaches 21 at the filter size 15. However, in SG method, number of statistically different locations were more than those found in the FFT, but the number of locations did not changing drastically. The number of statistically disturbed locations in SG method varied between 16 and 19. The optimum filter size for smoothing the vegetation spectra was found to be 11 in FFT and 9 in SG method.     

Evaluating the Sensitivity of Image Fusion Quality Metrics to Image Degradation in Satellite Imagery

Referring to the high potential of topographic satellite in collecting high resolution panchromatic imagery and high spectral, multi spectral imagery, the purpose of image fusion is to produce a new image data with high spatial and spectral characteristics. It is necessary to evaluate the quality of fused image by some quality metrics before using this product in various applications. Up to now, several metrics have been proposed for image quality assessment; which are also applicable for quality evaluation of fused images. However, it seems more investigations are needed to inspect the potentials of proposed Image Fusion Quality Metrics (IFQMs) to registration accuracy, especially in high resolution satellite imagery. This paper focuses on such studies and, using different image fusion quality metrics, experiments are conducted to evaluate the sensitivity of such metrics to a set of high resolution satellite imagery covering urban areas. The obtained results clearly reveal that these metrics sometimes do not behave robust in the whole area and also their obtained results are inconsistence in different patch areas in comparison with the whole image. These limitations are in minimum situation for an image quality metric such as SAM and are completely tangible for image quality metrics such as ERGAS in case of multi modal and DIV and CC from mono modal category.     

POS数据的上下视差误差源检测及误差补偿回归模型

分析POS数据存在系统误差的主要原因,推导基于POS的立体像对相对定向模型,建立POS系统误差回归补偿模型。三个不同比例尺测区试验数据的结果表明：POS系统提供的外方位元素中角元素误差是引起模型上下视差的主要误差源;利用回归补偿模型对POS数据进行改正后模型上下视差明显减小;在无需区域网平差的情况下,直接通过相对定向消除POS系统误差,定位精度有较大提高,从而证明该补偿模型的正确性与可行性。     

Application of Spatial Database in Quantitative Analysis of Litho-Paleogeography—A Case Study of a Middle Ordovician Sequence Interval in the Ordos Basin

In the study of sequence stratigraphy and litho-paleogeography,quantitative analysis,precise calculation and detailed comparison of tremendous geological data,such as field profiles,logging records and seismic curves from different areas,are the basic requirements.In order to obtain a more reliable and precise result,this paper presents a novel method that combines spatial database analysis with the single-factor mapping technology to establish sequence stratigraphical succession and to map the Ordo-vician litho-paleogeography of the Ordos Basin,one of the largest oil-gas bearing basins in North China Platform.By using this method,all of the related basic geological data can be quantitatively analyzed and effectively managed.Various attributes of the ba-sic stratigraphic units and their characters,such as sequence thickness,penecontemporaneous dolostone content,shallow water parget content,and terrigenous material content,can be fully utilized statistically in facies analysis and in mapping.Based on this analysis,this paper has be exerted single-factor isopachous mapping quantitatively for each of the Ordovician sequences in the ba-sin,and finally synthesized multiple factors to reconstruct the litho-paleogeography for each of the sequence intervals.The study shows that the proposed method is quite effective and has a much higher resolution in recognizing litho-paleogeographic subunits compared with traditional ways.For example,in one of the Middle Ordovician sequence intervals(SQ19 in the Lower Majiagou Formation) of the Ordos Basin,the authors have successfully developed a mathematical formula to divide the distribution of various facies units substantially,such as old lands,submarine uplifts,supratidal zones,intertidal zones and subtidal zones.     

城乡一体化地籍信息系统功能的设计

在综合分析了城镇地籍信息系统功能和土地利用信息系统功能的基础上,研究并设计了城乡一体化地籍信息系统的功能.从地籍数据的采集、更新和应用3个层面设计了管理维护、土地调查、地籍变更、土地登记、查询分析、统计分析和共享服务等7个子系统.