滇东铂钯地球化学勘查及异常评价

利用滇东地区1∶20万水系沉积物化探的组合副样,按8km×8km面积重新组合,采用C-OES法定量分析其Pt、Pd含量,在此基础上圈定了4种主要类型Pt、Pd异常:①与中古元古代昆阳群黑色页岩建造有关的Pt、Pd异常;②与上震旦统—下寒武统黑色页岩建造有关的Pt、Pd异常;③与二叠纪峨眉山玄武岩建造有关的Pt、Pd异常;④与其他沉积建造有关的Pt、Pd异常。并对该地区Pt、Pd地球化学异常进行了评价,为进一步开展Pt、Pd资源评价提供科学依据。     

山东蒙阴县埠洼金矿与韧性剪切带的关系

埠洼金矿受NW向台上-盘东沟韧性剪切带的控制，矿体产于剪切带中南部的英云质超糜岩中，矿体呈右行侧列式分布，成矿体用与韧性剪切变形变质导致的动力分异作用密切相关，赋矿空间为韧-脆性剪切作用形成的扩容带，是在韧性剪切基础上形成的金矿床。     

辽宁地区的幔枝构造

将辽宁地区划分为4个幔枝构造:山海关幔枝、辽东南幔枝、建平-阜新幔枝、西丰幔枝,文章分述了它们各自组成与构造特点,并举例说明了辽宁幔枝构造通过其三个次级构造单元对成矿的控制规律.     

伊宁吐拉苏火山盆地金矿成矿构造系统与远景评估

吐拉苏火山盆地金矿成矿构造系统由2种类型的成矿构造组成，一种是火山机构中的高角度塌陷式断裂；另一种是爆发．沉积相中的低角度水压式断裂．阿希金矿受控于弧形塌陷式断裂，其北东段坍塌强度大于南东段，最大张裂空间控制的矿体群向NE侧伏．阿希火山机构东侧的阿恰勒河组下可能隐伏着与西侧对应的高角度弧形塌陷式成矿断裂．爆发．沉积相中硅化岩型金矿受控于水压式断裂，不透水凝灰岩层圈闭富水粗火山碎屑岩层，组成压力仓构造并发生水力压裂作用．由水力压裂作用形成的层控水压式成矿断裂出现的几率，远大于后期由非成矿断裂切割抬升它们出现的几率．构造解析表明吐拉苏火山盆地2类成矿构造控制的金矿具有巨大的地质找矿潜力．     

北大别燕子河片麻岩的锆石U-Pb年龄：印支期变质事件的确定

本文对北大别燕子河地区英云闪长质片麻岩中的锆石进行了单颗粒U-Pb年龄测定。该片麻岩中存在两种类型的锆石,一种是片麻岩原岩中的岩浆锆石,在后期的变质事件中经历了不同程度的Pb丢失;另一种是变质作用过程中的新生锆石。5个分析点拟合出一条很好的不一致线,得到上下交点的年龄分别为880±110Na和228±13Ma(MSWD=1.1),其中上交点的年龄代表了片麻岩原岩的形成时代,下交点的年龄代表了变质作用发生的时间。变质锆石给出了238Ma的一致年龄,与不一致线给出的下交点年龄在误差范围内相同。这一结果表明北大别片麻岩也经历了印支期变质作用。北大别地体为扬子板块的北缘,华北与扬子板块的缝合线应位于北大别以北。     

叶碲铋矿研究中存在问题分析

叶碲铋矿最初定名为wehrlite，结构式为Bi2 xTe3-x，后于1982年改名为pilsenite，结构式相应改为Bi4Te3。楚碲铋矿(BiTe)的成分介于原叶碲铋矿的成分范围之内。有些研究者仍用原成分确定叶碲铋矿或把楚碲铋矿当作叶碲铋矿，本文旨在提醒研究者注意，避免误用。     

洛阳市水资源可利用量研究

以洛阳市为对象，对区域水资源的可利用量进行了研究。区域水资源量包括地表水实际可利用量和地下水实际可利用量。将地表径流中基流部分按比例划出，与河道汛期弃水量加在一起作为河道的生态需水量，从地表水资源量中扣除生态需水量后可得地表水的实际可利用量。将难以利用的地下水量从地下水资源量中扣除后可得地下水实际可利用量。     

乌鲁木齐10号泉流量变化的多尺度小波分析与异常识别

结合10号泉开始观测以来的震例，利用基于小波分析的多尺度分析原理对乌鲁木齐10泉流量的日均值观测序列进行了分析，总结了10号泉流量多尺度分析结果的映震特征。10号泉流量的地震前兆异常绝大多数是高值异常且具有较好的重复性，即一般都是在高值异常结束后几个月之内发生地震，个别情况下地震会发生在高值异常持续时段内。初步可以认定，利用基于小波变换的多尺度分析原理将流量数据分解成若干频段后，能够较好地识别和提取流量原始测值中不易分辨的震前异常。     

油气差异泵吸作用机理探讨——以泌阳凹陷为例

通过对泌阳凹陷油气成藏过程的系统研究,发现在差异抬升过程中,深凹源岩区抬升幅度小,凹陷四周圈闭发育区抬升幅度大,差异抬升运动导致源岩和圈闭之间的势能差急剧增大,从而促使油气大规模沿砂体向圈闭充注,这一过程类似于水泵抽水的过程,据此,文中提出了油气泵吸作用和油气差异泵吸作用的概念及机理,并以泌阳凹陷为例讨论了油气差异泵吸作用的形成条件、主要影响因素及油气差异泵吸作用对油气差异分布的控制作用。研究表明:影响油气差异泵吸作用的因素主要有势能梯度、通道质量和泵源配置及油气运移距离;泌阳凹陷油气分布总体上受成藏运聚系统的控制,在各运聚系统内油气分布受油气差异泵吸作用的控制,其中势能梯度、泵源配置及油气运移距离是影响油气差异分布的主要因素,而在每一个大泵(复合泵)内部,通道质量差异是影响油气差异分布的主要因素。     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.