Stability Analysis and Numerical Simulation of Differential Frost Heave

Differential frost heave is often implicated in the formation of patterned ground in regions subject to recurrent freezing and thawing. A linear stability analysis (LSA) indicates that a continuum model of frost heave is linearly unstable under typical natural freezing conditions of silty-clay soils. A two-dimensional non-linear numerical analysis corroborates the frozen time LSA results, and also indicates the importance of non-linear and time-dependent terms that ultimately lead to a preferred mode, which the LSA fails to predict. Instability of the one-dimensional solution occurs at shallow freezing depths and near-zero surface loads when positive perturbations in the ice content at the freezing front lead to a concomitant increase in thermomolecular pressure and upward ice velocity. Differential frost heave can then occur because of the increased heat flux from the perturbed surfaces. A three-dimensional model using random initial surface perturbations indicates that regular surface patterns will evolve with a length scale in the order of 2–4 meters, which corresponds quite closely with naturally-occurring non-sorted patterned ground.     

Non-Linear Theory and Power-Law Models for Information Integration and Mineral Resources Quantitative Assessments

Singular physical or chemical processes may result in anomalous amounts of energy release or mass accumulation that, generally, are confined to narrow intervals in space or time. Singularity is a property of different types of non-linear natural processes including cloud formation, rainfall, hurricanes, flooding, landslides, earthquakes, wildfires, and mineralization. The end products of these non-linear processes can be modeled as fractals or multifractals. Hydrothermal processes in the Earth’s crust can result in ore deposits characterized by high concentrations of metals with fractal or multifractal properties. Here we show that the non-linear properties of the end products of singular mineralization processes can be applied for prediction of undiscovered mineral deposits and for quantitative mineral resource assessment, whether for mineral exploration or for regional, national and global planning for mineral resource utilization. In addition to the general theory and framework for the non-linear mineral resources assessment, this paper focuses on several power-law models proposed for characterizing non-linear properties of mineralization and for geoinformation extraction and integration. The theories, methods, and computer system discussed in this paper were validated using a case study dealing with hydrothermal Au mineral potential in southern Nova Scotia, Canada.     

Inversely-Mapped Analytical Solutions for Flow Patterns around and within Inclined Elliptic Inclusions in Fluid-Saturated Rocks

In this paper, an inverse mapping is used to transform the previously-derived analytical solutions from a local elliptical coordinate system into a conventional Cartesian coordinate system. This enables a complete set of exact analytical solutions to be derived rigorously for the pore-fluid velocity, stream function, and excess pore-fluid pressure around and within buried inclined elliptic inclusions in pore-fluid-saturated porous rocks. To maximize the application range of the derived analytical solutions, the focal distance of an ellipse is used to represent the size of the ellipse, while the length ratio of the long axis to the short one is used to represent the geometrical shape of the ellipse. Since the present analytical solutions are expressed in a conventional Cartesian coordinate system, it is convenient to investigate, both qualitatively and quantitatively, the distribution patterns of the pore-fluid flow and excess pressure around and within many different families of buried inclined elliptic inclusions. The major advantage in using the present analytical solution is that they can be conveniently computed in a global Cartesian coordinate system, which is widely used in many scientific and engineering computations. As an application example, the present analytical solutions have been used to investigate how the dip angle of an inclined elliptic inclusion affects the distribution patterns of the pore-fluid flow and excess pore-fluid pressure when the permeability ratio of the elliptic inclusion is of finite but nonzero values.     

靖远矿区采煤沉陷区复垦综合评价方法研究

以靖远矿区为例,从土地复垦和恢复生态学的角度出发,建立了靖远矿区采煤沉陷区复垦综合评价系统,选择土壤条件（土层厚度、土壤质地、有机质含量、土壤水分）、地形改造条件（地面坡度、地表破坏程度、改造难易程度）、气候及水文条件（年降雨量、灌溉条件）作为分类及评价因子对复垦潜力进行评价。将采煤沉陷地分为四种潜力区,对每种潜力类型区的复垦开发利用方向进行了优化设计,从理论上和实践上对靖远矿区采煤沉陷地的复垦能力以及复垦过程中用地结构的优化作了探讨,以期对当地沉陷地的复垦提供一定的科学依据。     

北京及邻区微震活动的初步分析

通过对北京遥测地震台网近年来记录到的北京及邻区地震的震中分布,地震活动频度及能量释放强度的分析,得到本区地震活动在时间分布上具有“聚堆性”。在年发震频度,地震强度和能释放方面均具有双峰值特征,并且具有较好的一致性和同步性,在空间分布上具有条带特征,且形成北东～南西和北西～南东的两条相互交汇的条带。又通过统计分析得到本区发震概率最大的时间段是每年的１０月前后,而地震主要发生在北西～南东带上。     

Spatial orientation of the spin vectors of the disk galaxies in the Virgo cluster I. A catalogue of the disk galaxies in the Virgo cluster

Based on four UK Schmidt Telescope (UKST) IIIa-j direct plates which had been digitized by the Automated Plate Measuring System (APM), a detailed identification of the disk galaxies in the Virgo cluster has been carried out. The certain and possible member galaxies are mainly selected from the updated Catalogue of 2096 Galaxies in the Virgo Cluster Area (VCC). The area of this identification covers a 85 square degree region centered on this cluster. As a result, we compiled a new catalogue of 340 certain and possible member disk galaxies, including 85 lenticulars (SO), 136 spirals (S) and 119 irregulars (Irr), where the APM-measured values of the position angle (P.A.) and diameters of 299 disk galaxies are provided. For at least 149 galaxies, the values of the P.A. and diameters are published for the first time.Comparison between the APM-measured P.A. and diameters of galaxies and those given by the Uppsala General Catalog of Galaxies (UGC) demonstrates the reliability of our data. The statistical properties and completeness of this database are also discussed. Compared with the UGC-given P.A. and diameters which were determined by eyes, our data has no selection effect owing to the instrument measurements. Within our searching region, this might be the largest and relatively complete photometric database published so far for investigating the spatial orientation of the spin vectors of galaxies in the Virgo cluster.     

Calorimetric study of the coesite-stishovite transformation and calculation of the phase boundary

High temperature drop-solution calorimetry in molten 2 PbO · B₂O₃ at 1044 K for coesite and stishovite polymorphs of silica was carried out to determine the enthalpy of the coesite-stishovite transition. These experiments were performed on high-purity, single-phase samples of coesite and stishovite. Our new value for the enthalpy of the coesitestishovite transition (ΔH ₂₉₈ ⁰ ) is 29.85 ± 0.78 kJ/mol, which is about 35% lower than previously reported by Akaogi and Navrotsky (1984) and Holm et al. (1967), but which compares well with new measurements by Akaogi et al. (1994b). Using these new data, we have calculated the equilibrium phase boundary between coesite and stishovite and obtained a slope, dP/dT=0.0031 (2) GPa/K. This calculated slope is in good agreement with that determined [0.0026 (2) GPa/K] from the in-situ X-ray diffraction study of Zhang et al. (1996).     

SOMATOM AR.C型CT机复位故障检修

本文介绍了由电源故障引起的不可逆转故障,并讨论了维修和故障的排除。     

锦州湾泥沙来源、洄淤状况与建港条件分析

锦州湾泥沙主要来源于沿岸入海河流的输送,外海水体的携带与沿岸、岛屿蚀余物质的补给。每年进入湾内的泥沙总量约为３３—３５万吨,假如这些泥沙不再向湾外流出,在湾内作均匀分配沉积,则相当于在湾底铺上５ｍｍ厚的土。水准和水深重复测量表明,潮滩以稳定的弱堆积为主,水下浅滩基本处于稳定状态。该湾在非正常情况下产生骤淤的可能性不大。综合建港条件良好。     

Multiple outlier detection by evaluating redundancy contributions of observations

When applying single outlier detection techniques, such as the Tau () test, to examine the residuals of observations for outliers, the number of detected observations in any iteration of adjustment is most often more numerous than the actual number of true outliers. A new technique is proposed which estimates the number of outliers in a network by evaluating the redundancy contributions of the detected observations. In this way, a number of potential outliers can be identified and eliminated in each iteration of an adjustment. This leads to higher efficiency in data snooping of geodetic networks. The technique is illustrated with some numerical examples.