Impact of a Jet A-1/HEFA blend on the performance and emission characteristics of a miniature turbojet engine

It is forecast that in the future, alternative fuels derived from non-petroleum sources will become the basic propellant for turbine aircraft engines. Currently, five types of aviation turbine fuel containing synthesized hydrocarbons are certified and accepted, and allow adding a maximum of 50% of synthetic component to conventional fuel. The experimental performance and the emission characteristics of a turbojet engine were investigated in this paper. The studies were conducted with the use of a miniature turbojet engine, which is the main component of a laboratory test rig. The test rig is an interesting solution for engine research, due to the fact that studies concerning full-scale aircraft engines are very complex and expensive. The literature of the subject contains many papers using small-scale turbojet engines for testing alternative fuels. However, most of them concern components of fuels, e.g. biodiesel, butanol, which do not have direct application in aviation. Two different fuel samples, a conventional Jet A-1 fuel and a blend of 48% synthesized paraffinic kerosene from hydroprocessed esters and fatty acids process with Jet A-1 were tested. This process is one of the routes of producing alternative fuel for aviation, approved by ASTM standard. The test rig studies were performed according to a specific profile of engine test, which models different modes of a turbojet engine’s operation. The obtained results are compared in relation to the results for neat Jet A-1 fuel and then discussed.     

Non-woven polypropylene fabric modified with carbon nanotubes and decorated with nanoakaganeite for arsenite removal

Due to its harmful impact on human health, the presence of heavy metals, metalloids and other toxic pollutants in drinking or irrigation water is a major concern. Recent studies have proved that nanosized adsorbents are significantly more effective than their microsized counterparts. Particular attention has been given to nanocomposites with nanoadsorbents embedded in matrixes that could provide stability to the material and contribute to eliminating problems that may appear when using conventional granular systems. This study presents the preparation of a novel hybrid filter from a commercially available polypropylene (PP) non-woven fabric matrix modified with multiwall carbon nanotubes (MWCNT) and iron oxy(hydroxide) nanoparticles, and its use in the removal of As(III). A Box–Behnken statistical experimental design has been chosen to explore relevant variables affecting the filter performance: (1) As(III) concentration, (2) pH and (3) sorbent dose. From an As(III) concentration of 10 mg L^?1, at pH 6.5 and with a sorbent dose of 5 g L^?1, the PP filter modified with MWCNT removes 10% of the initial metalloid concentration, reaching a capacity of 0.27 mg g^?1. After modification with iron oxy(hydroxide), the performance of the material is largely enhanced. The filter, under the same conditions, removes 90% of the initial As(III) concentration, reaching a capacity almost tenfold higher (2.54 mg g^?1). This work demonstrates that the developed hybrid filter is effective toward the removal of As(III) in a wide range of pHs. A cubic regression model to compute the removal of the filter as a function of pH and sorbent dose is provided.     

Plant assemblage from Opole,southern Poland: New data on Late Cretaceous vegetation of the northern part of the European Province

This paper presents the results of studies on plant macroremains found in the upper Turonian of the Folwark Quarry, Opole, Poland, associated with palynological studies of the host rocks. In addition to a few macrofossils (gymnosperm wood, conifer Geinitzia reichenbachii and fern ?Didymosorus) rich sporomorphs (bryophyte, lycopod and fern spores, conifer and angiosperm pollen grains) and marine palynomorphs (mainly dinoflagellate cysts) were recorded. The palynological analysis revealed that the vegetation on the neighbouring land (the East Sudetic Island) in the late Turonian was much more diverse than could be reconstructed based on only macrofossil remains. The latter are taxonomically restricted and dominated by one gymnosperm species (Geinitzia reichenbachii), which make them similar to most neighbouring, coeval Central European assemblages. Its over representation is, thus, a result of taphonomy.     

Characterization of fluid inclusions from mineralized pegmatites of the Damara Belt,Namibia: insight into late-stage fluid evolution and implications for mineralization

Mineralogy and Petrology - Mineralized NYF and LCT pegmatites occur throughout the northeast-trending Neoproterozoic Damara Belt, Namibia. Mineralization in the pegmatites varies geographically,...     

Mg-enriched erythrite from Bou Azzer,Anti-Atlas Mountains,Morocco: geochemical and spectroscopic characteristics

Mineralogy and Petrology - Supergene Mg-enriched erythrite, with an average composition (Co2.25Mg0.58Ni0.14Fe0.04Mn0.02 Zn0.02) (As1.97P<0.01O8)·8H2O, accompanied by skutterudite,...     

The use of cartographic control points in the harmonization and revision of MRDBs

The main purpose of the research is to achieve fully automated approach for supplying multi-resolution databases with linear objects in each scale. Moreover, the proposed solutions maintain the repeatability and accuracy of output data wherever possible according to the input scale. These properties are achieved by keeping the minimal object dimensions as well as the appropriate data pre-processing, based on the classification of source points. The classification distinguishes three classes of points: constant (unchangeable), temporary, and inherited. These classes build a structure of cartographic control points. Based on these solutions, the authors proposed an algorithm for linear object simplification based on minimal object dimensions and cartographic control points. It was also confirmed that the simplification between constant points does not cause geometry discrepancies in relation to the global simplification of the whole line.     

Reflected and transmitted waves in a channel with side porous mattresses

The problem of wave propagation and wave damping in a channel with side porous mattresses of arbitrary shape protruding from the walls is studied. The solution was achieved by applying 3-D boundary element method and was employed to study wave field in the channel and to analyze the effect of the geometry of the mattresses and physical and hydraulic properties of porous material on wave damping. The results show that wave damping in the channel strongly depends on wave parameters, especially, on the wave number. Wave reflection and transmission decrease with increasing the wave number. The results also show that the wave field in the channel strongly depends on the geometry of the mattresses as well as on physical and hydraulic properties of porous material used to build these wave dampers. The geometry of the mattresses and physical and hydraulic properties of porous material have a moderate effect on wave reflection and a significant effect on wave transmission. The results show that wave transmission down the channel decreases with increasing the length and thickness of the mattresses. Moreover, wave transmission decreases with increasing the porosity and damping properties of porous media used to build the mattresses. The analysis shows that porous mattresses protruding from the channel walls are very efficient in damping water waves propagating down the channel and may be built in channels to reduce high waves and achieve desired wave conditions. Theoretical results are in reasonable agreement with experimental data.     

Hydroacoustic estimates of fish biomass and spatial distributions in shallow lakes

We conducted acoustical surveys with a horizontal beam transducer to detect fish and with a vertical beam transducer to detect depth and macrophytes in two typical shallow lakes along the middle and lower reaches of the Changjiang(Yangtze) River in November 2013. Both lakes are subject to active fish management with annual stocking and removal of large fish. The purpose of the study was to compare hydroacoustic horizontal beam estimates with fish landings. The preliminary results show that the fish distribution patterns dif fered in the two lakes and were af fected by water depth and macrophyte coverage. The hydroacoustically estimated fish biomass matched the commercial catch very well in Niushan Lake, but it was two times higher in Kuilei Lake. However, acoustic estimates included all fish, whereas the catch included only fish 45 cm(smaller ones were released). We were unable to determine the proper regression between acoustic target strength and fish length for the dominant fish species in the two lakes.     

The mycobiota of discoloured needles of the Swiss stone pine (<Emphasis Type="Italic">Pinus cembra</Emphasis> L.) in the Tatra Mountains (Poland)

The Swiss stone Pine (Pinus cembra L.) is an alpine species, fairly commonly occurring in the Alps and the Carpathians, close to the timberline. Natural sites of the Swiss stone pine in Poland are found exclusively in the Tatra Mountains, within the area of the Tatra National Park (TNP). In 2017, the health status of the needles of P. cembra was determined and their mycological analysis was carried out. As a result, 11 species of fungi were isolated from the needles showing disease symptoms, manifested by various shades of discoloration. The most frequently observed species was Fusarium oxysporum. It probably does not bring on disease symptoms, but may affect the development of other frequently isolated species (such as Sydowia polyspora, Lophodermium sp. and Lophodermium conigenum) that are pathogenic to Pinus spp.