Clay smear processes in mechanically layered sequences — Results of water-saturated model experiments with free top surface

The aim of this study is to improve our knowledge of the processes that lead to clay smear during faulting of a layered sand-clay sequence in an analogue sandbox model. We carefully characterized mechanical properties of the materials used by a series of geotechnical tests. Displacement field was quantified using PIV (Particle Image Velocimetry). The model is water-saturated to allow the deformation of wet clay and sand in one experiment comprising a sand package with a horizontal layer of clay above a predefined rigid basement fault. The thickness and rigidity of the clay layer are the parameters varied in this study. The model shows a range of structures that are related to competence contrast between sand and different clay types. Results show ductile shearing of soft clay with a transition to brittle fracturing of stiff clay accompanied by the formation of rotating clay blocks in the fault zone. Localized deformation is observed through time showing (i) the propagation of one active fault migrating laterally through the sediment package, and (ii) the formation of a stable prism between two or more active faults that gets progressively smaller with minor rotation of the hanging wall fault. Continuous clay smear is observed resulting from the lateral injection of clay as well as from a reworked mixture of sand and clay.     

Late Pleistocene fans and terraces in the Majes valley, southern Peru, and their relation to climatic variations

This study investigates the connection between sediment aggradation, erosion and climate in a desert environment of the Majes valley, southern Peru. Luminescence dating of terraces and fans shows that sediment aggradation correlates with wet time intervals on the Altiplano, suggesting a climatic influence on the aggradation–degradation cycles. Major periods of aggradation occurred between ~110–100, ~60–50 and 12–8 ka. More precipitation in the Majes catchment resulted in increased erosion and transportation of sediment from the hillslopes into the trunk river. As a result, the sediment loads exceeded the transport capacity of the Majes River and aggradation started in the lower reaches where the river gradient is less. Depletion of the hillslope sediment reservoirs caused a relative increase in the capacity of the trunk river to entrain and transport sediment, resulting in erosion of the previously deposited sediment. Consequently, although climate change may initiate a phase of sediment accumulation, degradation can be triggered by an autocyclic negative feedback and does not have to be driven by climatic change.     

Soil-precipitation feedbacks during the South American Monsoon as simulated by a regional climate model

We summarize the recent progress in regional climate modeling in South America with the Rossby Centre regional atmospheric climate model (RCA3-E), with emphasis on soil moisture processes. A series of climatological integrations using a continental scale domain nested in reanalysis data were carried out for the initial and mature stages of the South American Monsoon System (SAMS) of 1993–92 and were analyzed on seasonal and monthly timescales. The role of including a spatially varying soil depth, which extends to 8 m in tropical forest, was evaluated against the standard constant soil depth of the model of about 2 m, through two five member ensemble simulations. The influence of the soil depth was relatively weak, with both beneficial and detrimental effects on the simulation of the seasonal mean rainfall. Secondly, two ensembles that differ in their initial state of soil moisture were prepared to study the influence of anomalously dry and wet soil moisture initial conditions on the intraseasonal development of the SAMS. In these simulations the austral winter soil moisture initial condition has a strong influence on wet season rainfall over feed back upon the monsoon, not only over the Amazon region but in subtropical South America as well. Finally, we calculated the soil moisture–precipitation coupling strength through comparing a ten member ensemble forced by the same space–time series of soil moisture fields with an ensemble with interactive soil moisture. Coupling strength is defined as the degree to which the prescribed boundary conditions affect some atmospheric quantity in a climate model, in this context a quantification of the fraction of atmospheric variability that can be ascribed to soil moisture anomalies. La Plata Basin appears as a region where the precipitation is partly controlled by soil moisture, especially in November and January. The continental convective monsoon regions and subtropical South America appears as a region with relatively high coupling strength during the mature phase of monsoon development.     

Reconstructing climate variability on the northeastern Tibetan Plateau since the last Lateglacial – a multi-proxy,dual-site approach comparing terrestrial and aquatic signals

A sediment core from a closed basin lake (Lake Kuhai) from the semi-arid northeastern Tibetan Plateau was analysed for its pollen record to infer Lateglacial and post glacial vegetation and climatic change. At Lake Kuhai five major vegetation and climate shifts could be identified: (1) a change from cold and dry to relatively warmer and more moist conditions at 14.8 cal ka BP; (2) a shift to conditions of higher effective moisture and a stepwise warmer climate at 13.6 cal ka BP; (3) a further shift with increased moisture but colder conditions at 7.0 cal ka BP; (4) a return to a significantly colder and drier phase at 6.3 cal ka BP; (5) and a change back to relatively moist conditions at 2.2 cal ka BP. To investigate the response of lake ecosystems to climatic changes, statistical comparisons were made between the Lake Kuhai pollen record and a formerly published ostracod and sedimentary record from the same sediment core. Furthermore, the pollen and lacustrine proxies from Lake Kuhai were compared to a previously published pollen and lacustrine record from the nearby Lake Koucha. Statistical comparisons were done using non-metric multidimensional scaling and Procrustes rotation. Differences between lacustrine and pollen responses within one site could be identified, suggesting that lacustrine proxies are partly influenced by in-lake or local catchment processes, whereas the terrestrial (pollen) proxy shows a regional climate signal. Furthermore, we found regional differences in proxy response between Lake Kuhai and Lake Koucha. Both pollen records reacted in similar ways to major environmental changes, with minor differences in the timing and magnitude of these changes. The lacustrine records were very similar in their timing and magnitude of response to environmental changes; however, the nature of change was at times very distinct. To place the current study in the context of Holocene moisture evolution across the Tibetan Plateau, we applied a five-scale moisture index and average link clustering to all available continuous palaeo-climate records from the Tibetan Plateau to possibly find general patterns of moisture evolution on the Plateau. However, no common regional pattern of moisture evolution during the Holocene could be detected. We assign this to complex responses of different proxies to environmental and atmospheric changes in an already very heterogeneous mountain landscape where minor differences in elevation can cause strong variation in microenvironments.     

Predictive modelling of dump water impact on the surroundings of the lignite dump site Jänschwalde (Eastern Germany)

Open cast mining of lignite leads to dumps containing highly mineralised pore waters. To predict the impact of the dump waters on the undisturbed aquifers two steps are necessary. (1) The prediction of dump water quality at times when steady state flow conditions will be established. (2) The simulation of the dump ground water migration with a model that is able to handle the complexity of the homogeneous and heterogeneous interactions of the migration process.For the investigated site Jänschwalde, which is still dewatered, a chemical mass balance was performed. The predicted alkalinity potentials exceed acidity potentials for the dump as a whole. The distribution of these parameters show high alkalinity potentials for the northern part.In order to model the migration process the transport code PCGEOFIM^® [Anwenderdokumentaion, IBGW Leipzig, (in German)] was coupled with the geochemical equilibrium code PHREEQC [USGS, Water-Resources Investigations Report]. This was done to simulate redox reactions, mineral dissolution and precipitation, and cation exchange in the ground water zone. The model is verified by a column flow test. The results of the simulations show a small effect of the migrating dump waters on the quartenary aquifer with respect to acidity changes. This results from calcite buffering and cation exchange. The impact on the quartenary aquifer by sulphate is much higher.     

Climate sensitivity studies of the Greenland ice sheet using satellite AVHRR,SMMR, SSM/I and in situ data

Summary The feasibility of using satellite data for climate research over the Greenland ice sheet is discussed. In particular, we demonstrate the usefulness of Advanced Very High Resolution Radiometer (AVHRR) Local Area Coverage (LAC) and Global Area Coverage (GAC) data for narrow-band albedo retrieval. Our study supports the use of lower resolution AVHRR (GAC) data for process studies over most of the Greenland ice sheet. Based on LAC data time series analysis, we can resolve relative albedo changes on the order of 2–5%. In addition, we examine Scanning Multichannel Microwave Radiometer (SMMR) and Special Sensor Microwave Imager (SSM/I) passive microwave data for snow typing and other signals of climatological significance. Based on relationships between in situ measurements and horizontally polarized 19 and 37 GHz observations, wet snow regions are identified. The wet snow regions increase in aerial percentage from 9% of the total ice surface in June to a maximum of 26% in August 1990. Furthermore, the relationship between brightness temperatures and accumulation rates in the northeastern part of Greenland is described. We found a consistent increase in accumulation rate for the northeastern part of the ice sheet from 1981 to 1986.With 16 Figures     

Electrical conductivity measurements on synthetic olivines and on olivine,enstatite and diopside from Dreiser Weiher,Eifel (Germany) under defined thermodynamic activities as a function of temperature and pressure

Results of electrical conductivity measurments on synthetic olivines of the system Mg₂SiO₄Fe₂SiO₄ and on minerals of Dreiser Weiher peridotite nodule Ib-8 (Eifel, Germany) are discussed in relation to the measuring procedure and to the variation of thermodynamic parameters.The measurements were performed in solid state high-pressure vessels between 340 and 1100°C and at a pressure of 10 kbar. It is shown that for ternary olivines and for pyroxenes, the control of two further variables, like the chemical activities of the components, is needed besides temperature and pressure control. The experimental set-up for the control of chemical activities and oxygen partial pressure is shown. From the slopes of the lines of log σ against 1/T the activation energies were calculated. Though in most cases the same oxygen fugacity ?_O2 is applied, the results reveal different values for synthetic and natural samples since the chemical activities of SiO₂ are different.     

Electrical conductivity measurements on olivines and pyroxenes under defined thermodynamic activities as a function of temperature and pressure

Electrical conductivities of Ni₂SiO₄, Fe₂SiO₄, and MgSiO₃ were measured on synthetic powders in the temperature range 340° to 1,100° C and at pressures up to 20 kbars. For ternary compounds such as olivines and pyroxenes the control of two further variables, like the chemical activities of two components are needed, besides temperature and pressure. The activities of the corresponding binary oxides were controlled by equilibrating the samples with their neighbour-phases. Control of the oxygen partial pressure was achieved by buffer techniques. From the slopes of the lg σ vs. 1/T lines the activation energies were calculated for 10 kbar: 0.56 eV and 2.7 eV for Ni₂SiO₄ in equilibrium with SiO₂ and Ni/NiO-buffer for the temperature range 500°–800°C and 800°–1,000°C resp. 0.52 eV for Fe₂SiO₄ in equilibrium with SiO₂ and metallic iron, and 0.38 eV in equilibrium with SiO₂ and magnetite; 1.11 eV for MgSiO₃ in equilibrium with SiO₂, and 1.25 eV in equilibrium with Mg₂SiO₄.     

Influence of oxygen partial pressure on the Mg/Fe distribution in olivines

The dependence of Mg/Fe ordering on oxygen partial pressure in natural olivine crystals of volcanic origin has been studied by X-ray diffraction. Two natural crystals with 10% and 12% fayalite have been investigated and the atomic positions, anisotropic temperature factors, extinction coefficients and site occupancies have been refined, reaching R-values of 2.2%. After subjecting the crystals to oxygen partial pressures of 10^?16 bar and 10^?21 bar the crystals were studied again. In total six crystals were studied and the distribution coefficients K _D determined. The natural untreated crystals had K _D=1.09 and 1.06, e.g., a slight preference of Fe in (M1). p(O₂) of 10^?16 bar increased the ordering of Fe in (M1) to K _D=1.2, while p(O₂)=10^?21 bar reversed K _D to 0.8 with ordering of Fe in (M2). These experiments suggest that Mg/Fe ordering in olivines is primarily determined by the prevailing oxygen partial pressure.