Climatic and limnological changes at Lake Karakul (Tajikistan) during the last ~29 cal ka

We present results of analyses on a sediment core from Lake Karakul, located in the eastern Pamir Mountains, Tajikistan. The core spans the last ~29 cal ka. We investigated and assessed processes internal and external to the lake to infer changes in past moisture availability. Among the variables used to infer lake-external processes, high values of grain-size end-member (EM) 3 (wide grain-size distribution that reflects fluvial input) and high Sr/Rb and Zr/Rb ratios (coinciding with coarse grain sizes), are indicative of moister conditions. High values in EM1, EM2 (peaks of small grain sizes that reflect long-distance dust transport or fine, glacially derived clastic input) and TiO₂ (terrigenous input) are thought to reflect greater influence of dry air masses, most likely of Westerly origin. High input of dust from distant sources, beginning before the Last Glacial Maximum (LGM) and continuing to the late glacial, reflects the influence of dry Westerlies, whereas peaks in fluvial input suggest increased moisture availability. The early to early-middle Holocene is characterised by coarse mean grain sizes, indicating constant, high fluvial input and moister conditions in the region. A steady increase in terrigenous dust and a decrease in fluvial input from 6.6 cal ka BP onwards points to the Westerlies as the predominant atmospheric circulation through to present, and marks a return to drier and even arid conditions in the area. Proxies for productivity (TOC, TOC/TN, TOC _Br ), redox potential (Fe/Mn) and changes in the endogenic carbonate precipitation (TIC, δ¹⁸O _Carb ) indicate changes within the lake. Low productivity characterised the lake from the late Pleistocene until 6.6 cal ka BP, and increased rapidly afterwards. Lake level remained low until the LGM, but water depth increased to a maximum during the late glacial and remained high into the early Holocene. Subsequently, the water level decreased to its present stage. Today the lake system is mainly climatically controlled, but the depositional regime is also driven by internal limnogeological processes.     

Source component mixing controls the variability in Cu and Au endowment along the strike of the Eastern Andean Cordillera in Peru

Mississippian arc magmatic suites of the Au-rich Pataz and Cu-dominated Montañitas regions in Peru reveal distinct modes of magmatic-hydrothermal petro- and metallogenesis. The distinction is remarkable due to their broad contemporaneity (336–322 Ma), arc-parallel position, and close distance (<?50 km) to each other. In both arc regions, petrography, geochemistry, and the tectonic setting of magmatic suites suggest a rapid switch from syn-collisional/compressional to post-collisional/extensional (with ‘A₂-type’ signature) emplacement regime. Rocks of the Au-rich Pataz region originate from mixed sources with a contribution from the mantle (εHf?>?0 and δ¹⁸O of ~?5.3‰) and assimilated old crust (variously low εHf and δ¹⁸O >?5.3‰). The ultimate source of Au in the mineralised Pataz batholith was oxidised (fO₂ at FMQ buffer; based on zircon trace chemistry) and alkali-, LILE- and HFSE-enriched, most likely represented by the metasomatised mantle. The syn-extensional emplacement of the relatively reduced (ΔFMQ?<?0), but unmineralised, A₂-type suite involved assimilation of reduced crust. Associated, reduced, magmatic-hydrothermal fluids infiltrated the Au-bearing batholith suite and effectively mobilised and transported and concentrated Au. In the Montañitas region, rocks are oxidised (ΔFMQ?>?0) and dominantly mantle derived without significant incorporation of crustal material. Samples from the Cu-mineralised suites indicate the additional contribution of a δ¹⁸O <?5.3‰ source, potentially melted layer-2 gabbro. In addition, the elevated whole-rock La/Yb and Sr/Y ratios are compatible with minor addition of slab-derived material, which may have enhanced Cu endowment in this region. Late-magmatic, oxidised fluids derived from the younger A₂-type suite controlled Cu mobilisation and concentration, while Au behaved largely refractory. In general terms, it is postulated that source mixing in continental arcs is a first-order control of contrasting Cu and Au endowment and that sequential intrusion processes facilitate late-magmatic-hydrothermal mobilisation and concentration of specific metal assemblages.     

Sedimentology,stratigraphy and architecture of the Nicobar Fan (Bengal–Nicobar Fan System), Indian Ocean: Results from International Ocean Discovery Program Expedition 362

Drill sites in the southern Bay of Bengal at 3°N 91°E (International Ocean Discovery Program Expedition 362) have sampled for the first time a complete section of the Nicobar Fan and below to the oceanic crust. This generally overlooked part of the Bengal–Nicobar Fan System may provide new insights into uplift and denudation rates of the Himalayas and Tibetan Plateau. The Nicobar Fan comprises sediment gravity-flow deposits, mostly turbidites, that alternate with hemipelagite drapes and pelagite intervals of varying thicknesses. The decimetre-thick to metre-thick oldest pre-fan sediments (limestones/chalks) dated at 69 Ma are overlain by volcanic material and slowly accumulated pelagites (0.5 g cm⁻² kyr⁻¹). At Expedition 362 Site U1480, terrigenous input began in the early Miocene at ca 22.5 Ma as muds, overlain by very thin-bedded and thin-bedded muddy turbidites at ca 19.5 Ma. From 9.5 Ma, sand content and sediment supply sharply increase (from 1–5 to 10–50 g cm⁻² kyr⁻¹). Despite the abundant normal faulting in the Nicobar Fan compared with the Bengal Fan, it offers a better-preserved and more homogeneous sedimentary record with fewer unconformities. The persistent connection between the two fans ceased at 0.28 Ma when the Nicobar Fan became inactive. The Nicobar Fan is a major sink for Himalaya-derived material. This study presents integrated results of International Ocean Discovery Program Expedition 362 with older Deep Sea Drilling Project/Ocean Drilling Program/International Ocean Discovery Program sites that show that the Bengal–Nicobar Fan System experienced successive large-scale avulsion processes that switched sediment supply between the Bengal Fan (middle Miocene and late Pleistocene) and the Nicobar Fan (late Miocene to early Pleistocene). A quantitative analysis of the submarine channels of the Nicobar Fan is also presented, including their stratigraphic frequency, showing that channel size/area and abundance peaked at ca 2 to 3 Ma, but with a distinct low at 3 to 7 Ma: the intervening stratigraphic [sub]unit was a time of reduced sediment accumulation rates.     

A Lateglacial and Holocene lake record from the Nianbaoyeze Mountains and inferences of lake, glacier and climate evolution on the eastern Tibetan Plateau

Our 12.81 m long record from Lake Ximencuo provides insight into the Lateglacial and Holocene evolution of the lake and the Nianbaoyeze glacier in its catchment, and the regional climate history since 19 kyr. Lake Ximencuo was a permanent deep lake throughout its history. In contrast to numerous lakes on the Tibetan Plateau which experienced shallow lake levels or even desiccation during the Lateglacial, Lake Ximencuo was fed by large quantities of meltwater in the Lateglacial. The existence of glaciated upper catchment areas is apparently a prerequisite for lakes on the Tibetan Plateau which maintained relatively high water levels during the generally cold and dry periods following the global LGM (21 kyr). A minor re-advance of the Nianbaoyeze glacier was recorded coeval with the Greenland Stadial 2a (16.4 and 14.5 kyr), followed by rapid warming apparently synchronous with the Greenland Interstadial 1. Warmest conditions were recorded at Lake Ximencuo during the early Holocene which was punctured by a remarkable pulse of climate deterioration around 8.3 kyr. This spell represents probably the 8.2 kyr event of the North Atlantic region, suggesting that it had a significant impact on the Tibetan Plateau. Colder conditions of longer duration occurred from 4.7 to 3.7 kyr, apparently in phase with numerous records signalling colder and drier conditions on the Tibetan Plateau. Two minor spells of colder conditions and probably catchment erosion were recorded in the late Holocene between 2.0 and 1.4 kyr and between 0.5 and 0.1 kyr with the latter representing the Little Ice Age. It is unclear, whether human activities may have accelerated or even solely triggered the late Holocene erosion events.     

An evaluation of the use of renewable energy to pump water in Sacala las Lomas,Guatemala

An evaluation has been conducted to establish if using renewable energy is technically and economically feasible to pump water in Sacala las Lomas, Guatemala. A deep groundwater well has been proposed and a multi-stage pump system is being considered to distribute groundwater to users’ homes. A weather station was erected in Sacala to collect site-specific data. Wind velocity, wind direction, solar insolation, temperature, precipitation, and barometric pressure data were collected over a 1-year study period. The analysis of the data indicated that the potential power generated by a photovoltaic array or wind turbine would be insufficient to economically pump water to the village under current conditions. Although there may be reasons other than economics that make the potential renewable energy applications attractive, the space and maintenance required to install and operate a sufficient off-grid system outweigh the benefits. A grid-intertie system would allow any number of solar panels to be used in the system while still providing the electricity demand using grid-power.     

Nonstationarity of turbulent heat fluxes at Summit,Greenland

Turbulence data collected over a total of 25 days during two summers are used to describe processes responsible for the nonstationarity of turbulent sensible heat fluxes at Summit, Greenland. A stationarity test shows that about 40% of the data are classified as nonstationary. Three main factors are explored to account for the large fraction of nonstationary runs: (1) intermittency of turbulence in stable conditions, (2) changes in net all-wave radiation in response to cloud forcing, and (3) diurnal trends in stability. A classification procedure that accounts for the intermittent nature of turbulence shows that during stable, nonstationary conditions 50% of the total sensible heat flux is realized in 22% of the sampling time. Intermittency often occurs at Summit during periods characterized by weak and irregular horizontal winds in combination with strong stability. Rapid changes in net all-wave radiation in response to cloud forcing results in nonstationarity during unstable conditions. Between 0930–1130 and 1900–1930 UTC turbulent heat fluxes are not only small in magnitude but also typically change sign, with nonstationarity during these periods often as high as 65%. These results should help resolve some of the present uncertainties in obtaining reliable fluxes at this site, in particular under stable atmospheric conditions.     

Optimizing the Environmental Performance of In Situ Thermal Remediation Technologies Using Life Cycle Assessment

In situ thermal remediation technologies provide efficient and reliable cleanup of contaminated soil and groundwater, but at a high cost of environmental impacts and resource depletion due to the large amounts of energy and materials consumed. This study provides a detailed investigation of four in situ thermal remediation technologies (steam enhanced extraction, thermal conduction heating, electrical resistance heating, and radio frequency heating) in order to (1) compare the life‐cycle environmental impacts and resource consumption associated with each thermal technology, and (2) identify options to reduce these adverse effects. The study identifies a number of options for environmental optimization of in situ thermal remediation. In general, environmental optimization can be achieved by increasing the percentage of heating supplied in off peak electricity demand periods as this reduces the pressure on coal‐based electricity and thereby reduces the environmental impacts due to electricity production by up to 10%. Furthermore, reducing the amount of concrete in the vapor cap by using a concrete sandwich construction can potentially reduce the environmental impacts due to the vapor cap by up to 75%. Moreover, a number of technology‐specific improvements were identified, for instance by the substitution of stainless steel types in wells, heaters, and liners used in thermal conduction heating, thus reducing the nickel consumption by 45%. The combined effect of introducing all the suggested improvements is a 10 to 21% decrease in environmental impacts and an 8 to 20% decrease in resource depletion depending on the thermal remediation technology considered. The energy consumption was found to be the main contributor to most types of environmental impacts; this will, however, depend on the electricity production mix in the studied region. The combined improvement potential is therefore to a large extent controlled by the reduction/improvement of energy consumption.     

The 6dF Galaxy Survey: final redshift release (DR3) and southern large-scale structures

We report the final redshift release of the 6dF Galaxy Survey (6dFGS), a combined redshift and peculiar velocity survey over the southern sky  (| b | > 10°)  . Its 136 304 spectra have yielded 110 256 new extragalactic redshifts and a new catalogue of 125 071 galaxies making near-complete samples with  ( K , H , J , r _F, b _J) ≤ (12.65, 12.95, 13.75, 15.60, 16.75)  . The median redshift of the survey is 0.053. Survey data, including images, spectra, photometry and redshifts, are available through an online data base. We describe changes to the information in the data base since earlier interim data releases. Future releases will include velocity dispersions, distances and peculiar velocities for the brightest early-type galaxies, comprising about 10 per cent of the sample. Here we provide redshift maps of the southern local Universe with   z ≤ 0.1  , showing nearby large-scale structures in hitherto unseen detail. A number of regions known previously to have a paucity of galaxies are confirmed as significantly underdense regions. The URL of the 6dFGS data base is http://www-wfau.roe.ac.uk/6dFGS .     

Retrieval of P–T information from shear zones: thermobarometric consequences of changes in plagioclase deformation mechanisms

Changes in deformation mechanism coupled with spatial and temporal variations in reaction rates can result in preservation of disequilibrium mineral compositions in rocks affected by synmetamorphic shearing. Thermobarometric calculations on such rocks may thus yield meaningless results. We use Garbenschiefer samples from a shear zone in the Eastern Alps to study the effects of different deformational processes on calculated pressures and temperatures in samples that experienced the same overall PTt history. We focus on plagioclase, which accommodates strain by a variety of deformation mechanisms and is a key mineral in many thermobarometers. Plagioclase that deformed largely via dislocation creep mechanisms shows concentric chemical zoning, whereas plagioclase that experienced dissolution-precipitation creep preserves complex zoning. Rim compositions in the latter domains are not necessarily the youngest compositions, nor did they typically equilibrate with other phases in the assemblage. The timing of hornblende breakdown reactions relative to changes in plagioclase deformation mechanism also affected chemical zoning. Samples that escaped shear strain while near the thermal maximum yield internally consistent thermobarometric results, whereas samples that experienced shearing near the thermal maximum yield scattered results. Some of the variability in the results likely represents real differences in the P–T conditions at which equilibration occurred during deformation. However, much of the variability represents spurious results obtained by pairing mineral compositions that were never in equilibrium with one another. Extraction of useful P–T information from samples that experienced synmetamorphic deformation requires careful documentation of the relationships between deformation mechanisms and chemical zoning in order to select appropriate mineral compositions for thermobarometric calculations.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.