Multi‐transient electromagnetic repeatability experiment over the North Sea Harding field‡

We present results of synthetic time‐lapse and real repeatability multi‐transient electromagnetic surveys over the North Sea Harding field. Using Archie's law to convert porosity and fluid saturation to resistivity we created 3D isotropic models of the reservoir resistivity at different stages of production from the initial state in 1996 through to complete hydrocarbon production by 2016 and, for each stage, we simulated an east‐west transient electromagnetic survey line across Harding. Unconstrained 1D full‐waveform Occam inversions of these synthetic data show that Harding should be detectable and its lateral extent reasonably well‐defined. Resistivity changes caused by hydrocarbon production from initial pre‐production state to production of the oil rim in 2011 are discernible as are significant changes from 2011–2016 during the modelled gas blowdown phase. The 2D repeatability surveys of 2007 and 2008 tied two wells: one on and the other off the structure. Between the two surveys the segment of the field under investigation produced 3.9 million barrels of oil – not enough to generate an observable time‐lapse electromagnetic anomaly with a signal‐to‐noise ratio of 40 dB. Processing of the 2007 and 2008 data included deconvolution for the measured source current and removal of spatially‐correlated noise, which increased the signal‐to‐noise ratio of the recovered impulse responses by about 20 dB and resulted in a normalized root‐mean‐square difference of 3.9% between the data sets. 1D full‐waveform Occam inversions of the real data showed that Harding was detectable and its lateral extent was also reasonably well‐defined. The results indicate that the multi‐transient electromagnetic method is suitable for exploration, appraisal and monitoring hydrocarbon production.     

Early Benthic Organism Colonization on a Caribbean Coral Reef (Barbados, West Indies): a Plate Experimental Approach

Abstract. Macrofaunal colonization was studied using coral plates fixed at 10 m depth on a fringing reef in Barbados, West Indies. Two sites were compared: Spring Garden, a site that is affected by eutrophication, and Six Men's Bay which is relatively free of this effect. Two sets of plates were immersed in winter and spring 1990 at each site and monitored for 28 and 19 weeks, respectively. Green and brown algae colonized first, followed 2 weeks later by ostracods, cumaceans, amphipods and polychaetes: terebellids, nereidids and syllids. Most colonizers either nestled or encrusted. A total of 11 017 invertebrates belonging to 145 species were collected. Polychaetes were the most abundant and diverse zoological group. Considering polychaetes, crustaceans and molluscs, the study sites shared around 75% of the species. Overall, densities were higher on lower (shaded) surfaces while diversities were higher on upper (illuminated) sides. Similarity coefficients and correspondence analysis showed different macrobenthic assemblages and colonization patterns in light and shaded and in polluted and unpolluted sites. Coral plates were associated according to their 'immersion time' and were closely linked to their stage of development. Spring Garden (polluted) presented a higher number of soft-bottom and deposit-feeder species ( e.g. , Capitella capitata ).     

Velocity dispersion estimates of APM galaxy clusters

We present 83 new galaxy radial velocities in the field of 18 APM clusters with redshifts between 0.06 and 0.13. The clusters have Abell identifications and the galaxies were selected within 0.75  h ⁻¹ Mpc in projection from their centres. We derive new cluster velocity dispersions for 13 clusters using our data and published radial velocities.
We analyse correlations between cluster velocity dispersions and cluster richness counts as defined in Abell and APM catalogues. The correlations show a statistically significant trend although with a large scatter, suggesting that richness is a poor estimator of cluster mass irrespectively of cluster selection criteria and richness definition. We find systematically lower velocity dispersions in the sample of Abell clusters that do not fulfil APM cluster selection criteria, suggesting artificially higher Abell richness counts owing to contamination by projection effects in this subsample.     

The impact of climatic and non-climatic factors on land surface temperature in southwestern Romania

Land surface temperature is one of the most important parameters related to global warming. It depends mainly on soil type, discontinuous vegetation cover, or lack of precipitation. The main purpose of this paper is to investigate the relationship between high LST, synoptic conditions and air masses trajectories, vegetation cover, and soil type in one of the driest region in Romania. In order to calculate the land surface temperature and normalized difference vegetation index, five satellite images of LANDSAT missions 5 and 7, covering a period of 26 years (1986–2011), were selected, all of them collected in the month of June. The areas with low vegetation density were derived from normalized difference vegetation index, while soil types have been extracted from Corine Land Cover database. HYSPLIT application was employed to identify the air masses origin based on their backward trajectories for each of the five study cases. Pearson, logarithmic, and quadratic correlations were used to detect the relationships between land surface temperature and observed ground temperatures, as well as between land surface temperature and normalized difference vegetation index. The most important findings are: strong correlation between land surface temperature derived from satellite images and maximum ground temperature recorded in a weather station located in the area, as well as between areas with land surface temperature equal to or higher than 40.0 °C and those with lack of vegetation; the sandy soils are the most prone to high land surface temperature and lack of vegetation, followed by the chernozems and brown soils; extremely severe drought events may occur in the region.     

Microcracking in calcite and dolomite marble: microstructural influences and effects on properties

Microstructure‐based finite-element analysis with a microcracking algorithm was used to simulate an actual degradation phenomenon of marble structures, i.e., microcracking. Both microcrack initiation and crack propagation were characterized, as were their dependence on lattice preferred orientation (LPO), grain shape preferred orientation (SPO), grain size, marble composition (calcite and dolomite) and grain‐boundary fracture toughness. Two LPOs were analyzed: a random orientation distribution function and an orientation distribution function with strong directional crystalline texture generated from a March–Dollase distribution. Three SPOs were considered: equiaxed grains; elongated grains and a mixture of equiaxed and elongated grains. Three different grain sizes were considered: fine grains of order 200 μm (only calcitic marble); medium size grains of order 1 mm (calcitic and dolomitic marbles); and large grains of order 2 mm (only dolomitic marble). The fracture surface energy for the grain boundaries, γ_ig, was chosen to be 20 and 40 % of the fracture surface energy of a grain, γ_xtal, so that both intergranular and transgranular fracture were possible. Studies were performed on these idealized marble microstructures to elucidate the range of microcracking responses. Simulations were performed for both heating and cooling by 50 °C in steps of 1 °C. Microcracking results were correlated with the thermoelastic responses, which are indicators related to degradation. The results indicate that certain combinations of LPO, SPO, grain size, grain‐boundary fracture toughness and marble composition have a significant influence on the thermal-elastic response of marble. Microstructure with the smallest grain size and the highest degree of SPO and LPO had less of a tendency to microcrack. Additionally, with increasing SPO and LPO microcracking becomes more spatially anisotropic. A significant observation for all microstructures was an asymmetry in microcracking upon heating and cooling: more microcracking was observed upon cooling than upon heating. Given an identical microstructure and crystallographic texture, calcite showed larger thermal stresses than dolomite, had an earlier onset of microcracking upon heating and cooling, and a greater microcracked area at a given temperature differential. Thermal expansion coefficients with and without microcracking were also determined.     

STRUCTURAL TENSION,MIGRATION, AND DEVELOPMENT: A CASE STUDY OF VENEZUELA*

Mismatch of labor demand and supply, resulting from economic growth, is referred to here as structural tension. Spatial variations in structural tension are identified for Venezuelan states in 1971. Positive tension, indicating overutilization of human resources, prevails in urban areas. By contrast, rural locales exhibit underutilization due to rapid labor force growth without parallel increases in employment opportunities. Influence of structural tension, coupled with other migration determinants, upon destination choice by economically active immigrants is explored. Structural tension emerges as strongly significant for the total sample, displacing wages from the model. This is consistent with our contention that wages are a less precise indicator of labor supply and demand.     

Phytoplankton assemblages in the CoOP-WEST coastal upwelling area

Elevated levels of phytoplankton were observed at the Northern California coastal upwelling ecosystem studied as part of the CoOP-WEST project during monthly summer surveys in 2000, 2001 and 2002. The high concentrations of chlorophyll were made up mostly of larger cells; the phytoplankton communities that resulted were dominated by centric diatoms. The highest chlorophyll a concentrations were observed when large diatoms or small colony-forming species dominated the assemblages. In contrast, when smaller nano-flagellates and picoplankton were dominant, total chlorophyll a concentrations were over four or five-fold lower than when diatoms were prevalent, illustrating the importance of large diatoms to total phytoplankton biomass. Each year, when chlorophyll concentrations were greatest, Chaetoceros species created a Chaetoceros-dominated system. A few other genera contributed to the upwelling diatom community, mostly the centric diatoms Asterionella, Thalassiosira, Rhizosolenia (including Guinardia and Proboscia), and the pennate Nitzschia. These diatoms have been described in other coastal upwelling ecosystems, and at this study site form a functional group that are apparently well adapted to the high-nutrient, turbulent conditions that are typical of these coastal regions.