A comparison of boundary layer diffusion schemes in unstable conditions over land

We compare the results of a local and a nonlocal scheme for vertical diffusion in the atmospheric boundary layer with observations at the 200 m tower at Cabauw. This is done for a 12 h period during daytime on 31 May 1978, which is characterised by strong insolation, clear skies, moderately strong winds and weak advection. The local diffusion scheme uses an eddy diffusivity determined independently at each point along the vertical based on local vertical gradients of wind and virtual potential temperature, similar to the usual approach in atmospheric models. The nonlocal scheme determines an eddy diffusivity profile based on a diagnosed boundary-layer height and a turbulent velocity scale. It also incorporates nonlocal (vertical) transport effects for heat and moisture. The boundary-layer diffusion schemes are forced with the locally observed fluxes for heat and moisture. The outputs of the scheme are compared with the observed mean structure along the Cabauw tower, and the radiosonde profile at a nearby location (De Bilt). Overall, the nonlocal scheme transports moisture away from the surface more rapidly than the local scheme, and deposits the moisture at higher levels. The local scheme tends to saturate the lowest model levels unrealistically in comparison with the observations. We also compare the outputs of the two diffusion schemes with the results of a transilient model simulation. Subsequently, we study the impact on the model behaviour by varying important parameters in both diffusion schemes and we investigate the sensitivity to uncertainty in the environmental conditions. Finally, we study the interaction of the diffusion schemes with a simple surface flux scheme.     

Biomass Burning in Southern Africa: Individual Particle Characterization of Atmospheric Aerosols and Savanna Fire Samples

Ambient atmospheric aerosols and savanna fireparticulate emission samples from southern Africa werecharacterised in terms of particle classes and theirnumber abundance by electron probe X-ray microanalysis(EPXMA). About ten particle classes were identifiedfor each sample. The major classes werealuminosilicates and sea salts for ambient coarse(2–10 m equivalent aerodynamic diameter (EAD))samples, and K-S and S-only particles for ambient fine(<2 m EAD) samples. The K-S particles are oneof the major products of biomass burning. The EPXMAresults were found to be consistent with the resultsfrom bulk analyses on a sample by sample basis. Forsavanna fire fine samples, quantitative EPXMA revealedthat many particles had a composition of simple saltssuch as KCl. Some particles had a deviatingcomposition in the sense that more ionic species wereinvolved in sustaining the balance between cations andanions, and they were composite or mixed salts.Because of extensive processing during the atmospherictransport, the composition of the K-S particles in theambient samples was different from K₂SO₄,and such particles were enriched with S. The finepyrogenic KCl particles and the fine sea-saltparticles were much depleted in chlorine.     

Storm-damaged saline-contaminated boreholes as a means of aquifer contamination

Saline water from a storm surge can flow down storm-damaged submerged water supply wells and contaminate boreholes and surrounding aquifers. Using data from conventional purging techniques, aquifer test response analysis, chemical analysis, and regression analysis of chloride/silica (Cl/Si) ratio, equations were derived to estimate the volume of saline water intrusion into a well and a porous media aquifer, the volume of water needed to purge a well shortly following an intrusion event, and the volume of water needed after delay of several or more months, when the saline plume has expanded. Purging time required is a function of volume of water and pumping rate. The study site well is located within a shoreline community of Lake Pontchartrain, St. Tammany Parish, in southeastern Louisiana, United States, which was impacted by two hurricane storm surges and had neither been rehabilitated nor chlorinated prior to our study. Chemical analysis of water samples in fall 2005 and purging of well and aquifer in June 6, 2006, indicated saline water had intruded the well in 2005 and the well and aquifer in 2006. The volume of water needed to purge the study well was approximately 200 casing volumes, which is significantly greater than conventionally used during collection of water samples for water quality analyses.     

Hydrological characteristics of karstic groundwater in the northeast Viet Nam as studied by isotopic techniques

The stable water isotopic composition (δ²H and δ¹⁸Ο), tritium (³H) activity, dissolved organic carbon, alkalinity, as well as the composition of carbon 13 (δ¹³C) in dissolved inorganic carbon (DIC) of 36 water samples taken from 16 resurgences in the northeast provinces of Viet Nam in the dry (Mar 2008) and rainy (June 2008) seasons were analyzed to elucidate hydrological characteristics of the karstic aquifers in the area. The stable water isotopic composition of the water samples collected clearly demonstrated that the karstic groundwater in the region was recharged from the local meteorological water. The tritium activity in the samples was found to be in between 3 and 4 TU, falling in the range of the ³H activity in the local precipitation and thus meaning that the traveling of recharge water to the resurgences was very short. Concentrated and diffuse allogenic recharges seem to be important sources of karstic groundwater in the study region. Water in the karstic aquifers could be classified into three types as: (a) water from karstic areas with dense vegetation cover that causes DIC be depleted in carbon 13 (¹³δ<?12‰ vs. Pee Dee Belemnite standard of Vienna, VPDB); (b) water from karstic areas with poor vegetation cover that originates DIC with carbon 13 composition ranging from ?11 to ?12‰; and (c) surface water from lakes, springs and rivers that has DIC with enriched carbon 13 (δ¹³C >?10‰). This implies that there are several sources of carbon dioxide contributing to the DIC in water of the karstic aquifers in the study region. Among other potential sources, the atmospheric CO₂, CO₂ from carbonate rock dissolution, biomineralization of soil organic matters and plant roots respiration seem to be important sources of the DIC in the waters of this region. The results show high vulnerability towards anthropogenic contaminants of karstic groundwater in the study region.     

Top-down and bottom-up modelling to support low-carbon scenarios: climate policy implications

Bottom-up and top-down models are used to support climate policies, to identify the options required to meet GHG abatement targets and to evaluate their economic impact. Some studies have shown that the GHG mitigation options provided by economic top-down and technological bottom-up models tend to vary. One reason for this is that these models tend to use different baseline scenarios. The bottom-up TIMES_PT and the top-down computable general equilibrium GEM-E3_PT models are examined using a common baseline scenario to calibrate them, and the extend of their different mitigation options and its relevant to domestic policy making are assessed. Three low-carbon scenarios for Portugal until 2050 are generated, each with different GHG reduction targets. Both models suggest close mitigation options and locate the largest mitigation potential to energy supply. However, the models suggest different mitigation options for the end-use sectors: GEM-E3_PT focuses more on energy efficiency, while TIMES_PT relies on decrease carbon intensity due to a shift to electricity. Although a common baseline scenario cannot be ignored, the models’ inherent characteristics are the main factor for the different outcomes, thereby highlighting different mitigation options.

Policy relevance

The relevance of modelling tools used to support the design of domestic climate policies is assessed by evaluating the mitigation options suggested by a bottom-up and a top-down model. The different outcomes of each model are significant for climate policy design since each suggest different mitigation options like end-use energy efficiency and the promotion of low-carbon technologies. Policy makers should carefully select the modelling tool used to support their policies. The specific modelling structures of each model make them more appropriate to address certain policy questions than others. Using both modelling approaches for policy support can therefore bring added value and result in more robust climate policy design. Although the results are specific for Portugal, the insights provided by the analysis of both models can be extended to, and used in the climate policy decisions of, other countries.     

Characterisation of Soot Emitted by Domestic Heating,Aircraft and Cars Using Diesel or Biodiesel

The characterisation of aggregates, like soot, firstly requires the determination of the size distribution of the primary particles. The primary particle size of combustion generated aggregates depends upon the combustion environment and the formation conditions, such as temperature, pressure and fuel-to-air ratio, among others. Since the combustion characteristics are different in the different types of burners, the characterisation of primary particles may offer the possibility to distinguish soot from different sources. In this paper, we present the signature of the primary particles and the aggregates of soot emitted by cars using diesel or biodiesel, by domestic heating, and by aircraft exhausts, which can be considered as the major sources as derived from measurements on transmission electron micrographs. The size distributions of all aggregates types with different aerodynamic diameter were log-normal and quasi-monodisperse. The size distribution of the primary particles for soot emitted by different sources showed minor differences. However, a comparison between the diameter of the primary particles and those obtained using a standard method for carbon black revealed discrepancies. The median diameter of the primary particles was combined with the median number of primary particles in an aggregate to calculate the relative particle surface area available for adsorption. In a similar way, the relative specific surface area was determined. The surface area was measured using the Brunauer-Emmett-Teller (B.E.T.) nitrogen adsorption method and the relative surface area available for adsorption was calculated.     

A comprehensive model inter-comparison study investigating the water budget during the BALTEX-PIDCAP period

Summary A comparison of 8 regional atmospheric model systems was carried out for a three-month late summer/early autumn period in 1995 over the Baltic Sea and its catchment area. All models were configured on a common grid using similar surface and lateral boundary conditions, and ran in either data assimilation mode (short term forecasts plus data assimilation), forecast mode (short term forecasts initialised daily with analyses) or climate mode (no re-initialisation of model interior during entire simulation period). Model results presented in this paper were generally post processed as daily averaged quantities, separate for land and sea areas when relevant. Post processed output was compared against available analyses or observations of cloud cover, precipitation, vertically integrated atmospheric specific humidity, runoff, surface radiation and near surface synoptic observations. The definition of a common grid and lateral forcing resulted in a high degree of agreement among the participating model results for most cases. Models operated in climate mode generally displayed slightly larger deviations from the observations than the data assimilation or forecast mode integration, but in all cases synoptic events were well captured. Correspondence to near surface synoptic quantities was good. Significant disagreement between model results was shown in particular for cloud cover and the radiative properties, average precipitation and runoff. Problems with choosing appropriate initial soil moisture conditions from a common initial soil moisture field resulted in a wide range of evaporation and sensible heat flux values during the first few weeks of the simulations, but better agreement was shown at later times. Received September 8, 2000 Revised April 3, 2001     

Tracer experiments with turbulently dispersed air ions

Unipolar air ions released into the wind constitute a tracer which can be measured with high resolution. An ion source produces a cloud with homogeneous charge density, insensitive to source strength, dependent on time since formation only. It is well suited for tracing concentration changes due to turbulence, less suited for cloud size tracing. A tight array of 8 sensors has been used to examine turbulently dispersed ions. High-resolution records are presented and discussed. The highest concentrations measured could be undiluted source material. The frequency distribution within a plume did not differ from that in a multitude of puffs. The distribution seems to be log-normal with a geometric standard deviation of about 2.45. The time resolution used corresponds to volume resolutions of 40, 225, and 650 cm³. Sample size had no apparent effect.     

Scaling of the Vertical Spreading of a Plume of a Passive Tracer in a Rough-Wall Neutral Boundary Layer

The influence of surface roughness on the dispersion of a passive scalar in a rough wall turbulent boundary layer has been studied using wind-tunnel experiments. The surface roughness was varied using different sizes of roughness elements, and different spacings between the elements. Vertical profiles of average concentration were measured at different distances downwind of the source, and the vertical spread of the plume was computed by fitting a double Gaussian profile to the data. An estimate of the integral length scale is derived from the turbulence characteristics of the boundary layer and is then used to scale the measured values of plume spread. This scaling reduces the variability in the data, confirming the validity of the model for the Lagrangian integral time scale, but does not remove it entirely. The scaled plume spreading shows significant differences from predictions of theoretical models both in the near and in the far field. In the region immediately downwind of the source this is due to the influence of the wake of the injector for which we have developed a simple model. In the far field we explain that the differences are mainly due to the absence of large-scale motions. Finally, further downwind of the source the scaled values of plume spread fall into two distinct groups. It is suggested that the difference between the two groups may be related to the lack of dynamical similarity between the boundary-layer flows for varying surface roughness or to biased estimates of the plume spread.     

Evaluation of a high-resolution regional climate simulation over Greenland

A simulation of the 1991 summer has been performed over south Greenland with a coupled atmosphere–snow regional climate model (RCM) forced by the ECMWF re-analysis. The simulation is evaluated with in-situ coastal and ice-sheet atmospheric and glaciological observations. Modelled air temperature, specific humidity, wind speed and radiative fluxes are in good agreement with the available observations, although uncertainties in the radiative transfer scheme need further investigation to improve the model’s performance. In the sub-surface snow-ice model, surface albedo is calculated from the simulated snow grain shape and size, snow depth, meltwater accumulation, cloudiness and ice albedo. The use of snow metamorphism processes allows a realistic modelling of the temporal variations in the surface albedo during both melting periods and accumulation events. Concerning the surface albedo, the main finding is that an accurate albedo simulation during the melting season strongly depends on a proper initialization of the surface conditions which mainly result from winter accumulation processes. Furthermore, in a sensitivity experiment with a constant 0.8 albedo over the whole ice sheet, the average amount of melt decreased by more than 60%, which highlights the importance of a correctly simulated surface albedo. The use of this coupled atmosphere–snow RCM offers new perspectives in the study of the Greenland surface mass balance due to the represented feedback between the surface climate and the surface albedo, which is the most sensitive parameter in energy-balance-based ablation calculations.