Scaling of response spectrum and duration for aftershocks

Aftershocks have the potential to cause collapse of a structure that has been already damaged by the preceding main shock. Seismic safety of a structure should therefore be ascertained through a damage analysis using the anticipated main shock and few larger-aftershock motions. Simulation of aftershock motions needs characterization of the seismic hazard due to aftershocks, and therefore it will be useful to develop a conditional scaling model that can predict the response spectrum of an anticipated aftershock motion consistent with the design spectrum of the main shock motion anticipated at the same station. In this study an attempt is made to develop a conditional scaling model for the pseudo spectral velocity spectrum via linear regression analysis on the aftershock and main shock recordings for the 1999 Chi–Chi earthquake. It is shown that it may be possible to obtain a simpler and approximate version of the conditional model from an unconditional model. Damage-causing potential of a ground motion also depends on its strong motion duration (SMD) and therefore a conditional scaling model is developed for SMD of the aftershock motion in several narrow frequency-bands. The model is developed for the larger-aftershock motions and it is shown that a reasonable replacement of such a model may be obtainable directly from an unconditional model. Finally, a simple weighted averaging scheme is proposed to obtain the composite SMD from the SMDs for different frequency bands by using the pseudo spectral acceleration spectrum of the motion.     

Comment on the paper “CAWSES November 7–8, 2004, Superstorm: Complex Solar and Interplanetary Features in the Post-Solar Maximum Phase,” B. T. Tsurutani,E. Echer,F. L. Guarnieri,and J. U. Kozyra,Geophys. Res. Lett. 35 (2008)

The solar sources of the magnetic storms of November 8 and 10, 2004, are analyzed. The preliminary results of such an analysis [Yermolaev et al., 2005] are critically compared with the results of the paper [Tsurutani et al., 2008], where solar flares were put in correspondence with these magnetic storms. The method for determining solar sources that cause powerful magnetospheric storms is analyzed. It has been indicated that an optimal approach consists in considering coronal mass ejections (CMEs) as storm sources and accompanying flares as additional information about the location of CME origination.     

Petrophysical properties of rocks in seismogenic crustal blocks of the southeastern Greater Caucasus and their geological and geophysical interpretation

The elastic and density properties of rocks of the Shamakha-Ismailly seismogenic blocks are studied by the ultrasonic pulse method in quasi-hydrostatic high pressure apparatuses. An attempt is made to more accurately determine the upper crustal lithology of these blocks. The observed values of the elastic and density characteristics of the rocks at high pressures suggest that the upper layers in the Ismailly and Shamakha blocks can consist of sedimentary carbonate rocks such as marls, sandstones, mudstones, and limestones. The middle layers apparently consist of volcaniclastic rocks: lithoclastic tuffs, andesites, etc. The lower layer (basement) in both blocks is likely composed of basic rocks such as basalts, trachybasalts, etc. According to the values of elastic wave velocities and densities, gabbroid rocks may compose the fourth layer of the Buinuz intrusion, identified from seismic data.     

Meteorological and synoptic aspects of the formation and evolution of the Novorossiysk Bora

The genetic and synoptic classifications of the Novorossiysk Bora are created using the data of daily observations at the Novorossiysk meteorological station and other available synoptic information. Obtained are the quantitative criteria of these classifications, and on this base worked out are the basic scenarios of the generation and evolution of this dangerous phenomenon on the Black Sea coast of Russia. According to the genetic classification, the Bora was divided into four types: frontal, air-mass, monsoon, and gravity. Quantitative criteria worked out for each type can be used for the more accurate forecast of this destructive phenomenon near Novorossiysk. According to the synoptic classification, four classes were distinguished: Azores, North Atlantic, Siberian, and Arctic.     

Data base management system for erosivity values

In order to check the premature siltation of the reservoirs and guard against the drop in the irrigation potential, the Government of India has launched the schemes of soil conservation and integrated watershed management in the catchments of RVPs and Flood Prone rivers. Owing to the large financial and manpower commitments needed to implement and execute soil conservation measures over vast catchment areas, a priority approach for treatment was identified. The methodology developed for prioritization of watersheds of a catchment area conceptualizes sedimentation of the reservoirs as a multiplicative function of erosivity value and the delivery ratio. This paper deals with the development of a computerized data base software module ‘WEIGHT’ for determination of erosivity values for the mapping units comprising assemblages of the varying combinations of climate, physiography and slope, land use and cover conditions, soil characteristics (texture, solumn thickness, permeability and pH) and the existing erosion and soil conservation measures. The WEIGHT software package is coded in FORTRON-4 for PDP 11/83 operating system. the data base comprises storage of the attributes of the different erosivity determinants of the mapping units with predetermined erosivity values sequentially on a disk and comparing the attributes of a new mapping unit to get the most probabilities erosivity value. The objective has been to eliminate the personal bias and bring about the objectivity in the process of assigning erosivity values to the different mapping units. The data base design, design logic and operational sequence of the data base are discussed in the paper.     

Stable isotope study of base metal deposits from the Eastern High Atlas,Morocco

Tertiary epigenetic lead ± zinc and copper mineralizations occur in the Mesozoic carbonate cover and stibnite, barite and copper mineralization in the Precambrian to Palaezoic basement in the Eastern High Atlas, Morocco. The carbon isotope data from host carbonates range from +3 to -1‰ PDB. The data are typical for marine carbon. There is no difference between surrounding dolomites and younger vein dolomites. The oxygen isotopic composition of the samples is enriched in ¹⁶O; the range is from -3 to -11‰ PDB with respect to that of carbonates in equilibrium with marine water. It is postulated that the isotopic composition was changed during dolomitization being caused by transition of connate formation waters diluted to some degree by meteoritic water. The bacteriogenically reduced sulphur from syngenetic sulphides and Mesozoic marine sulphate mobilized during Tertiary orogenesis are thought to be the source of H₂S and SO₄. Cambro-Ordovicien sulphate is also supposed to be the source of sulphur in the Jebel Zelmou barite deposit in the basement. Isotopic composition of lead from galenas in the Tertiary deposits from the Mesozoic cover are strikingly homogenous. Model ages vary between 230–180 Ma. It is suggested that important mobilization processes are responsible for Tertiary metallogeny in Morocco.

     

Geochemistry of Suspended Matter from Waters of the Amazon Basin

The geochemical study of the suspended matter in the waters of the Amazon River and its tributaries revealed that the chemical composition of this material ranges widely; however, generally, it is similar to the average composition of the suspended matter in the rivers and clayey sedimentary rocks around the world. Against this background, an essential regional Hg enrichment due to the anthropogenic factor is distinguished. The suspensions from the so-called clear waters from the tributaries of the Amazon River—Xingu and Trombetas—demonstrate the local enrichment in Pb, Sn, Zn, and organic carbon indicating the ore mineralization of the drainage basin, and points to the presence of metal-organic complexes.     

High-resolution ion-microprobe measurement of lead isotopes: Variations within single zircons from Lac Seul,northwestern Ontario

Selected-area measurements of lead-isotope ratios in zircons have been made at high mass resolution using a modified A.E.I. IM20 ion-microprobe. At a working resolution of 3200 it is shown that the important interfering molecular peaks generated from the zircon matrix may be separated from atomic lead peaks. Corrections for overlapping peaks, which are necessary in measurements of lead isotopes at low mass resolution, are then only required for ²⁰⁸Pb.Measurements on N.B.S. standards show no isotope discrimination within counting statistics. Determination of ²⁰⁷Pb/²⁰⁶Pb on 29 single zircon grains from a tonalite gneiss and a granite from Lac Seul, northwestern Ontario, give very variable ratios with mean values close to those of bulk separates. Peaks in the distribution of 207/206 ratios obtained from the tonalite gneiss may be interpreted as evidence for two stages of lead loss. High 207/206 ratios are shown to be significant for at least two zircons and probably record a minimum age of formation of 3.3 ± 0.1 b.y. for the gneiss.