Quantitative vulnerability estimation for scenario-based landslide hazards

Within the engineering profession and natural sciences, vulnerability is widely accepted to be defined as the degree of loss (or damage) to a given element or set of elements within the area affected by a threat. The value of vulnerability is expressed nondimensionally between 0 and 1. It is a fundamental component in the evaluation of landslide risk, and its accurate estimation is essential in making a reasonable prediction of the landslide consequences. Obviously, vulnerability to landslides depends not only on the characteristics of the element(s) at risk but also on the landslide intensity. This paper summarizes previous research on vulnerability to landslides and proposes a new quantitative model for vulnerability of structures and persons based on landslide intensity and resistance of exposed elements. In addition, an approximate function is suggested for estimating the vulnerability of persons in structures. Different methods for estimating the vulnerability of various elements to slow or rapid landslides are discussed. Finally, the application of the new model is illustrated through an example.     

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

Implementation of Elastic Prestack Reverse-Time Migration Using an Efficient Finite-Difference Scheme

Elastic reverse-time migration (RTM) can reflect the underground elastic information more comprehensively than single-component Pwave migration. One of the most important requirements of elastic RTM is to solve wave equations. The imaging accuracy and efficiency of RTM depends heavily on the algorithms used for solving wave equations. In this paper, we propose an efficient staggered-grid finite-difference (SFD) scheme based on a sampling approximation method with adaptive variable difference operator lengths to implement elastic prestack RTM. Numerical dispersion analysis and wavefield extrapolation results show that the sampling approximation SFD scheme has greater accuracy than the conventional Taylor-series expansion SFD scheme. We also test the elastic RTM algorithm on theoretical models and a field data set, respectively. Experiments presented demonstrate that elastic RTM using the proposed SFD scheme can generate better images than that using the Taylor-series expansion SFD scheme, particularly for PS images. FurH. thermore, the application of adaptive variable difference operator lengths can effectively improve the computational efficiency of elastic RTM.     

Artificial light at night: implications for early life stages development in four temperate freshwater fish species

Flora and fauna have both evolved under a natural cycle of light and dark. But especially in urban areas, the night is now increasingly disturbed by artificial light. Many traits and behaviours in fish are triggered by a circadian clock, for example hatching and swim bladder inflation, which predominantly take place at dusk or night. As lighting becomes brighter and extends farther into rural areas, the distinction between day and night becomes increasingly blurred. Therefore, the loss of diurnal trigger by artificial light at night was hypothesized having deleterious effects on these traits and impact fish reproduction. To assess these effects, eggs of four native freshwater fishes, Eurasian perch Perca fluviatilis, roach Rutilus rutilus, bleak Alburnus alburnus and chub Leuciscus cephalus, were incubated under two different light conditions: a photoperiod of 14 h light:10 h darkness (LD) and continuous illumination (LL). The time to hatch and swim bladder inflation was recorded. The species showed inconsistent reactions to the light treatments. In roach and bleak, the time to 50% hatch was longer in LL, whereas continuous lighting had an accelerating effect in chub. Incubation in LL elongated the hatching period in perch and roach and, in perch, the onset of darkness seemed to trigger hatching. The swim bladder inflation was significantly promoted by continuous light in chub and bleak but was not affected in roach. In conclusion, nocturnal artificial illumination could have an effect on hatching and initial swim bladder filling by masking the day–night-change and thereby diminish the trigger effect. However, the reactions were species specific and the increase in variation indicated a lack of diurnal triggering, whilst a general deleterious effect of artificial light at night has not been identified on early life stages.     

Estimates of heat flow and heat production and a thermal model of the São Francisco craton

An updated analysis of geothermal data from the highland area of eastern Brazil has been carried out and the characteristics of regional variations in geothermal gradients and heat flow examined. The database employed includes results of geothermal measurements at 45 localities. The results indicate that the Salvador craton and the adjacent metamorphic fold belts northeastern parts of the study area are characterized by geothermal gradients in the range of 6–17°C/km. The estimated heat flow values fall in the range of 28–53 mW/m², with low values in the cratonic area relative to the fold belts. On the other hand, the São Francisco craton and the intracratonic São Francisco sedimentary basin in the southwestern parts are characterized by relatively higher gradient values, in the range of 14–42°C/km, with the corresponding heat flow values falling in the range of 36–89 mW/m². Maps of regional variations indicate that high heat flow anomaly in the São Francisco craton is limited to areas of sedimentary cover, to the west of the Espinhaço mountain belt. Crustal thermal models have been developed to examine the implications of the observed intracratonic variations in heat flow. The thermal models take into consideration variation of thermal conductivity with temperature as well as change of radiogenic heat generation with depth. Vertical distributions of seismic velocities were used in obtaining estimates of radiogenic heat production in crustal layers. Crustal temperatures are calculated based on a procedure that makes simultaneous use of the Kirchoff and Generalized Integral Transforms, providing thereby analytical solutions in 2D and 3D geometry. The results point to temperature variations of up to 300°C at the Moho depth, between the northern Salvador and southern São Francisco cratons. There are indications that differences in rheological properties, related to thermal field, are responsible for the contrasting styles of deformation patterns in the adjacent metamorphic fold belts.     

Adsorption of antimony(V) on kaolinite as a function of pH,ionic strength and humic acid

The present work investigated the adsorption and mobility (desorption) of Sb(V) on kaolinite using batch experiments. The adsorption of Sb(V) on kaolinite was studied as a function of contact time, pH, ionic strength, humic acid (HA), initial Sb(V) concentration and temperature. Kinetic studies suggest that the equilibrium is achieved within 24 h. The adsorption of Sb(V) was strongly affected by changes in I at low ionic strength and unaffected at high ionic strength. The adsorption is weakly dependent on the presence of humic acid, but is strongly dependent on pH. Within the range tested, the optimal pH for Sb(V) adsorption is 3.6, and close to 75% removal can be achieved. Desorption is dependent on the original suspension pH. The addition sequence of Sb(V)/HA do not influence the adsorption of Sb(V) on kaolinite. The adsorption data fit both the Freundlich and Langmuir isotherm. The thermodynamic parameters (ΔH ⁰, ΔS ⁰ and ΔG ⁰) were calculated from the temperature dependence, and the results suggest the endothermic and spontaneous nature of the process.     

Fractal-like adsorption kinetics of Pb^2＋ in rocks

The adsorption kinetics of Pb^2＋ in rocks has been studied using ion selective electrodes and atomic absorption spectrophotometer. The results showed that the adsorption process is a fractal-like reaction. The adsorption rate was relatively high before 30 minutes, and then dropped. The saturated adsorption capacity （a） of Pb^2＋ and kinetic parameters （b, a, D and k） increased with increasing initial concentrations of Pb^2＋. These parameters （except a） decreased while Na^＋ was present in the solution. Furthermore, the smaller the rocks were in grain size, the bigger these kinetic parameters would be, though the parameter a was almost constant.     

The junction of Fensch and Moselle rivers,France; mineralogy and composition of river materials

The Moselle river flows in the north-east of France, from Vosges Mountains to neighboring countries Luxembourg and Germany. One of its tributaries, the Fensch river, drains a highly industrialized watershed, strongly impacted by mining, smelting and surfacing activities. The objective of this work, part of a general research program on Moselle watershed (Zone Atelier Moselle) was to assess the impact of the polluted Fensch river on the global quality of the Moselle river. For that purpose, water, sediments and suspended particulate matter were sampled in both rivers, upstream and downstream the junction. Four main sampling campaigns were carried out, in winter during a flood event and in spring at low water level. On a first step, mineralogical analyses (XRD and FTIR) and chemical analyses (ICP-MS, ICP-AES), were performed on sediments, suspended particulate matters and filtered waters. Major and trace elements concentrations were obtained on two different granulometric fractions (0–2 mm and 0–50 μm) revealing the enrichment in heavy metals of fine particles. From one collecting campaign to another, seasonal variations could be evidenced on suspended matter composition even though major minerals (calcite, quartz and kaolinite) were always present. Furthermore, spatial variations were evidenced for Fensch and Moselle downstream sediments. Thus, very fine-grained sediments, poorly crystallized, displaying at the same time higher metal concentrations and higher organic matter content than in Fensch river material, were collected downstream, in a low hydrodynamic conditions zone, assumed as a preferential sedimentary zone or even as a placer. Strong correlations could be revealed between iron content and contaminant concentrations, confirming the origin of polluted material.     

Intensity and Magnetic Field Distribution of Sunspots

We study the relationship between the brightness (I) and magnetic field (B) distributions of sunspots using 272 samples observed at the San Fernando Observatory and the National Solar Observatory, Kitt Peak, whose characteristics varied widely. We find that the I – B relationship has a quadratic form for the spots with magnetic field less than about 2000 G. The slope of the linear part of the I – B curve varies by about a factor of three for different types of spots. In general the slope increases as the spot approaches disk center. The I – B slope does not have a clear dependency on the spot size but the lower limit appears to increase as a function of the ratio of umbra and penumbra area. The I – B slope changes as a function of age of the sunspots. We discuss various sunspot models using these results.