Responses of interrill runoff and erosion rates to vegetation change in southern Arizona

Vegetation change, fi-om grassland to shrubland, has occurred over much of the Sonoran and Chihuahuan Deserts during the past century. The effect of this vegetation change on interrill runoff and erosion was examined by conducting rainfall-simulation experiments on large runoff plots on contemporary grassland and shrubland hillslopes. These experiments show that, compared to the grassland, the interrill portions of shrubland hillslopes (1) have higher runoff rates, (2) experience equilibrium runoff conditions much more frequently, (3) exhibit higher overland flow velocities, and (4) are subject to greater rates of erosion. The environmental change that has led to the vegetation change has been relatively minor, but its geomorphic impact has been substantial.     

Geochemistry of Tertiary tholeiites and picrites from Qeqertarssuaq (Disko Island) and Nuussuaq, West Greenland with implications for the mineral potential of comagmatic intrusions

Tertiary continental flood basalts on Qeqertarssuaq and Nuussuaq in West Greenland contain ～3?km of picrites and variably contaminated tholeiites. The picrites are in the Naujánguit member of the Vaïgat Formation and they have 7–29?wt% MgO, La/Sm?=?0.9–2.1, and ¹⁴³Nd/¹⁴⁴Nd?=?0.51263–0.51307. They appear to have crystallised from high-Mg parental magmas (14.4–16.4?wt% MgO) with isotope and trace element ratios similar to recent Icelandic picrites. Discrete horizons of tholeiites, including the Asûk and?Kûgánguaq, have elevated SiO₂ (50–58 wt%), La/Sm?=?3–7, ⁸⁷Sr/⁸⁶Sr?=?0.70550–0.71224, and low ¹⁴³Nd/¹⁴⁴Nd?=?0.51234–0.51174. These lavas have low Cu and Ni abundances (typically 10–50?ppm Ni or Cu), and in the case of the Asûk on Qeqertarssuaq, they contain droplets of native iron. The low Cu and Ni contents are attributed to scavenging by magmatic sulphides formed in response to crustal contamination of picritic magmas. Two contamination trends are recognised, one to a sediment end-member with high Th/Nb and Archaean model Nd ages, and the other to a meta-igneous component with high La/Sm, low Th/Nb and Rb/Nb, and Proterozoic source ages. Overall, ²⁰⁶Pb/²⁰⁴Pb varies from 16.47–21.68. Both contamination trends are associated with low Cu and Ni, and high SiO₂, and it is argued that the magmatic sulphides were triggered by the increases in silica, rather than simply by the introduction of additional crustal-derived sulphur. Geochemically, the Asûk and Kûgánguaq rocks resemble the most contaminated Nadezhdinsky lavas of the Siberian Trap, which are widely regarded as the source of the Ni and Cu mineralisation in the giant Noril'sk deposits. Mass balance considerations indicate that the parental liquids to the contaminated magmas contained sufficient Ni, Cu, S and platinum group elements to form substantial magmatic sulphide deposits. However, unlike the lavas at Noril'sk, the contaminated (low Cu and Ni) West Greenland basalts are in isolated units with no evidence for a gradual recovery in Ni and Cu abundances with height in the lava column. Comparison with Noril'sk suggests that although significant quantities of metals were scavenged by sulphides in West Greenland, the metal contents of the sulphides may not have been upgraded by continued interaction with subsequent magma batches.     

The role of moisture cycling in the weathering of a quartz chlorite schist in a tropical environment: findings of a laboratory simulation

Long‐term weathering of a quartz chlorite schist via wetting and drying was studied under a simulated tropical climate. Cubic rock samples (15 mm × 15 mm × 15 mm) were cut from larger rocks and subjected to time‐compressed climatic conditions simulating the tropical wet season climate at the Ranger Uranium Mine in the Northern Territory, Australia. Fragmentation, moisture content and moisture uptake rate were monitored over 5000 cycles of wetting and drying. To determine the impact of climatic variables, five climatic regimes were simulated, varying water application, temperature and drying. One of the climatic regimes reproduced observed temperature and moisture variability at the Ranger Uranium Mine, but over a compressed time scale. It is shown that wetting and drying is capable of weathering quartz chlorite schist with changes expected over a real time period of decades. While wetting and drying alone does produce changes to rock morphology, the incorporation of temperature variation further enhances weathering rates. Although little fragmentation occurred in experiments, significant changes to internal pore structure were observed, which could potentially enhance other weathering mechanisms. Moisture variability is shown to lead to higher weathering rates than are observed when samples are subjected only to leaching. Finally, experiments were conducted on two rock samples from the same source having only subtle differences in mineralogy. The samples exhibited quite different weathering rates leading to the conclusion that our knowledge of the role of rock type and composition in weathering is insufficient for the accurate determination of weathering rates. Copyright © 2005 John Wiley & Sons, Ltd.     

Textural characteristics of sediments along the southern Red Sea coastal areas,Saudi Arabia

A lack of understanding exists of the origin and textural characteristics of Saudi Arabian Red Sea coastal sediments. This paper concerns the southern coastline of Jizan on the Saudi Red Sea. It is some 160 km long characterised by either narrow rocky headlands with intermittent pocket beaches or wide low-lying beaches dissected by wadis. Granulometric testing of samples from 135 locations showed that beach sand size was mainly very fine to medium grained (M _z = 3.93 Ø), sorting ranged from 1.65 to 0.41 and skewness values from ?051 to 0.39, being mainly negative; dune sands were medium to fine grained (M _z = 1.13 Ø; average sorting 2.8), while skewness variations within dune samples indicated symmetrical to fine skewed values (б _Ι = 0.55 to 0.89). Most foreshore samples were derived from wadis. Wadi mud levels can be high, e.g. Baysh (84%), and wadi Samrah (90%) with mean grain size ranging from very fine to medium sand (M _z = 3.9 Ø), sorting being well to poor (0.45 to 1.52) due to sediment influxes. Sabkha had a wide range of sand/mud and significantly higher carbonate percentages than other environments. Sediment source differences and littoral reworking contributed to grain size variation. The carbonate content varied between 1.5 and 31.5% due to hinterland contributions, and spatial analysis showed increasing quantities of carbonate minerals towards the south. On the wider geographical front, findings from Jizan are similar to those of the Northern United Arab Emirates (UAE), including sabkhas, being composed of sand, skeletal carbonate, fine fluvial material and wind-blown silt and clay components of wadi origin. Further work on the northeastern Red Sea edge can hopefully confirm these findings.     

The role of horizontal impulses of the faulting continental slope in generating the 26 December 2004 tsunami

For a long time, people have believed that the vertical displacement of seafloor due to undersea earthquakes is the primary cause of tsunami genesis. However, seismically-inverted seafloor deformation of the 2004 Sumatra–Andaman earthquake shows that the total vertical displacement is not enough to have generated the powerful Indian Ocean tsunami. Based on the seismically-inverted data and a three-dimensional ocean general circulation model (OGCM), we show that the momentum force, transferred by the horizontal impulses of the faulting continental slope in that earthquake, has accounted for two thirds of the satellite-observed tsunami height and generated kinetic energy 5 times larger than the potential energy due to the vertical displacement. The asymmetric tsunami pattern, recorded by tide-gauges showing leading-elevation waves toward Sri Lanka and leading-depression waves toward Thailand, is best explained by the horizontally-forced mechanism. The same mechanism has also explained the March 2005 Nias earthquake and tsunami data, suggesting that the horizontal motions of faulting have played more important roles in tsunami genesis than previously thought.     

A simulation study of the role of raindrop erosion in the formation of desert pavements

A simple model of raindrop erosion—the combined effects of the detachment of sediment by raindrops and its transport by splash or by overland flow—is developed to examine the role of this process in the formation of desert pavements. Application of the model to soils in areas of existing pavement initially simulates the formation of pavements, but the changing sediment size distributions lead to the subsequent destruction of these modelled surfaces. An improved model that accounts for the feedback effects of the changing size distributions on infiltration and microtopography is then developed. Incorporating these effects allows simulated pavements to be maintained over longer periods. The model yields desert pavements whose particle size compositions differ in response to differences in initial soil characteristics, slope and rainfall intensity. This model is tested against empirical data from a site where there is intershrub pavement and associated mounds of fines beneath desert shrubs. The results successfully predict the accumulation of fines under shrubs but underestimate the development of the pavement between shrubs. These findings suggest that the raindrop erosion mechanism on its own cannot account for the development of the pavement and that some other mechanism leading to the surface concentration of coarse particles must also be operating.     

Internal erosion of chemically reinforced granular materials: a mathematical modeling approach

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.     

Energy market failure in road transport: Is there scope for ‘no regrets’ greenhouse gas reduction?

The Australian Government policy on reduction of greenhouse gas emissions announced in 1990 includes exploring the scope for immediate, low cost reductions. Such measures can be taken as including ‘no regrets’ policies: those that, in addition to mitigating potential climate change, confer economic gains (including other environmental benefits) which exceed their costs. Some possible ‘no regrets’ opportunities and policies are identified relevant to energy use by the road transport sector over the period to 2020. The MARKALMENSA multi-period linear programming model of the Australian energy sector is used to investigate the cost-effectiveness of these policies.