A Parallel Implementation of the Lattice Solid Model for the Simulation of Rock Mechanics and Earthquake Dynamics

— The Lattice Solid Model has been used successfully as a virtual laboratory to simulate fracturing of rocks, the dynamics of faults, earthquakes and gouge processes. However, results from those simulations show that in order to make the next step towards more realistic experiments it will be necessary to use models containing a significantly larger number of particles than current models. Thus, those simulations will require a greatly increased amount of computational resources. Whereas the computing power provided by single processors can be expected to increase according to “Moore’s law,” i.e., to double every 18–24 months, parallel computers can provide significantly larger computing power today. In order to make this computing power available for the simulation of the microphysics of earthquakes, a parallel version of the Lattice Solid Model has been implemented. Benchmarks using large models with several millions of particles have shown that the parallel implementation of the Lattice Solid Model can achieve a high parallel-efficiency of about 80% for large numbers of processors on different computer architectures.     

Current remote sensing approaches to monitoring forest degradation in support of countries measurement,reporting and verification (MRV) systems for REDD+

Forest degradation is a global phenomenon and while being an important indicator and precursor to further forest loss, carbon emissions due to degradation should also be accounted for in national reporting within the frame of UN REDD+. At regional to country scales, methods have been progressively developed to detect and map forest degradation, with these based on multi-resolution optical, synthetic aperture radar (SAR) and/or LiDAR data. However, there is no one single method that can be applied to monitor forest degradation, largely due to the specific nature of the degradation type or process and the timeframe over which it is observed. The review assesses two main approaches to monitoring forest degradation: first, where detection is indicated by a change in canopy cover or proxies, and second, the quantification of loss (or gain) in above ground biomass (AGB). The discussion only considers degradation that has a visible impact on the forest canopy and is thus detectable by remote sensing. The first approach encompasses methods that characterise the type of degradation and track disturbance, detect gaps in, and fragmentation of, the forest canopy, and proxies that provide evidence of forestry activity. Progress in these topics has seen the extension of methods to higher resolution (both spatial and temporal) data to better capture the disturbance signal, distinguish degraded and intact forest, and monitor regrowth. Improvements in the reliability of mapping methods are anticipated by SAR-optical data fusion and use of very high resolution data. The second approach exploits EO sensors with known sensitivity to forest structure and biomass and discusses monitoring efforts using repeat LiDAR and SAR data. There has been progress in the capacity to discriminate forest age and growth stage using data fusion methods and LiDAR height metrics. Interferometric SAR and LiDAR have found new application in linking forest structure change to degradation in tropical forests. Estimates of AGB change have been demonstrated at national level using SAR and LiDAR-assisted approaches. Future improvements are anticipated with the availability of next generation LiDAR sensors. Improved access to relevant satellite data and best available methods are key to operational forest degradation monitoring. Countries will need to prioritise their monitoring efforts depending on the significance of the degradation, balanced against available resources. A better understanding of the drivers and impacts of degradation will help guide monitoring and restoration efforts. Ultimately we want to restore ecosystem service and function in degraded forests before the change is irreversible.     

Distribution of sterol and fatty alcohol biomarkers in particulate matter from the frontal structure of the Alboran Sea (S.W. Mediterranean Sea)

Sterol and fatty alcohol biomarkers were analyzed in suspended and sinking particles from the water column (20–300 m) of the Almeria–Oran frontal zone to characterize the biogenic sources and biogeochemical processes. Diatom- and haptophyte-related sterols were predominant at all sites and vertical distributions of sterol, and fatty alcohol biomarkers in sinking particles were markedly different from suspended particles. In contrast to the relatively fresh sinking particles with elevated concentrations of phyto- and zooplanktonic sterols, suspended particles were extensively degraded with increasing depth and exhibited a more terrestrial and zooplanktonic signature with depth.Sterol and alcohol biomarkers distributions and δ¹³C values from the jet core and the associated gyre of Atlantic waters showed a decoupling between the sinking particles of 100- and 300-m depth, demonstrating the influence of lateral advection in the frontal zone. In contrast, vertical transport of the particulate organic matter in Mediterranean waters was interpreted from the similar isotopic and molecular composition at both depths. The high abundance of phytosterols and phytol below the euphotic zone at 100 m signified that downwelling of biomass occurred on the downstream side of the gyre. The high concentrations of phytosterols and POC, in combination with the high phytosterols/phytol ratio, indicated the accumulation of detrital plant material in the oligotrophic Mediterranean waters near the frontal zone.A higher contribution of phytol in the sinking particles collected during the night at the surface of the jet and at the upstream side of the gyre provided evidence of diel vertical zooplankton migration and important grazing by herbivorous zooplankton.Carbon isotope ratios of sterols confirmed that the 24-ethylcholest-5-en-3β-ol, commonly associated with terrestrial sources, was a substantial constituent of the phytoplankton in this area. However, the more δ¹³C depleted values obtained for this compound in suspended particles suggested that there was some terrestrial contribution that only becomes evident after degradation of the more labile marine organic matter.     

Escaped introduced sea bass (Dicentrarchus labrax) infected by Sphaerospora testicularis (Myxozoa) reach maturity in coastal habitats off Canary Islands

Aquaculture activities have introduced European sea bass (Dicentrarchus labrax) along the coasts of some of the Canary Islands. We present the first record of simultaneous male and female gonad maturation of escaped sea bass in the wild, indicating that this species is finding its essential fish habitat (EFH). Individuals with ripe gonads were only caught during January and February 2009, although the maturation and spawning season may last from November to February in the studied area (Tenerife island). Bass infected by Sphaerospora testicularis were found and the incidence of the parasite was checked. This represents the southernmost record of the parasite, probably introduced together with sea bass stock. The results are discussed from the point of view of risk assessment and the ecology of invasions being valuable for aquaculture management in Central North Atlantic and Mediterranean areas.     

Carbon quantity defines productivity while its quality defines community composition of bacterioplankton in subarctic ponds

Bacterial communities in 16 oligotrophic ponds in Kilpisj?rvi, subarctic Finland, were studied to test the hypothesis that dissolved organic carbon (DOC) quantity and quality differently influence bacterioplankton. The ponds were located below and above treeline at 600?m a.s.l., with 2?C4 fold higher concentration of DOC below treeline. The concentration of DOC changed during the open-water season with highest values measured in mid-summer. Bacterial production, abundance, biomass were highest in mid-summer and correlated positively with the concentration of DOC. Quality indices of DOC showed that spring differed from the rest of the season. Highest specific UV-absorbance (SUVA) and humification index (HI), ratio a250/a265 and lowest fluorescence index (FI) were found during spring compared to summer and autumn, possibly indicating higher relative importance of allochthonous carbon during spring and a seasonal effect of photo-oxidation. According to Length Heterogeneity Polymerase Chain Reaction (LH-PCR) analyses, bacterial communities in spring were significantly different from those later in the season, possible due to the introduction of terrestrial bacteria associated with higher molecular weight material in spring DOC. Comparison between ponds situated above and below treeline revealed that bacteria were more abundant and productive at lower altitudes, which is probably connected to higher concentrations of DOC. The results also suggest that increased temperature and precipitation induced by global change and consequent higher allochthonous DOC runoff from the catchment could have a strong impact on biomass, productivity and community composition of micro-organisms in subarctic ponds and lakes.     

Moment tensor inversion of explosive long period events recorded on Arenal volcano,Costa Rica,constrained by synthetic tests

In order to constrain the moment tensor solution of an explosive seismic event recorded on Arenal volcano, Costa Rica, we perform tests using synthetic data. These data are generated using a 3D model including the topography of the volcano and the best estimation of the velocity model available for Arenal. Solutions for (i) the moment tensor components, and (ii) the moment tensor plus single forces, are analyzed. When noisy data and mislocated sources are used in the inversion, spurious single forces are easily generated in the solution for the moment tensor components plus single forces. Forces also appear when the inversion is performed using an explosive event recorded on Arenal in 2005. Synthetic tests indicate that these forces might be spurious. However the mechanism is correctly retrieved by the inversion in both solutions. The ability to recover the explosive mechanism for the 2005 event combined with the interpretative aids from the synthetics tests will enable us to invert for the large variation in events observed on Arenal.     

Aliphatic and aromatic hydrocarbons in coastal Caspian Sea sediments

This investigation represents the first extensive study of the spatial distribution and sources of aliphatic (n-alkanes and unresolved complex mixture of fossil hydrocarbons) and polycyclic aromatic hydrocarbons (PAHs) in coastal sediments from the Caspian Sea. PAH concentrations, n-alkanes and biomarker profiles all suggested that there was limited petrogenic contamination in the shallow North Caspian Sea sediments, which are coarse with a low total organic carbon content. In contrast, moderate to high petrogenic contamination was found in the South Caspian Sea, in particular in the offshore oil fields near Baku, Azerbaijan. Contaminant patterns indicated that the PAHs were mainly from fossil sources, with higher contributions of pyrolytic only near industrialized and urban areas. A high contribution of perylene, a geochemically derived PAH, to the total PAHs was found in the west and south at sites influenced by the Kura, Safid Rud, Terek, Sulak and Samur Rivers.     

Fetkin-hydro,a new thermo-hydrological algorithm for low-temperature thermochronological modeling

Despite two decades of major advances in the field of thermochronological modeling, state-of-the-art numerical implementations still rely mostly on burial and exhumation processes to explain radiometric measurements.Even though such an approach has proved valuable, failing to account for other first-order geological variables has led to misinterpretations and therefore, calls for a refinement.In this study a new version of the Fetkin(finite element temperature kinematics, Ecopetrol) program is presented.Its new algorithm couples time-dependent hydrological and thermal calculations, thus rendering thermochronological ages that, instead of being solely dependent on the kinematical evolution of a system, conditioning by the fluid flow is also present.In contrast with previous thermochronological models, this work considers the influence of effective stress on rock properties(porosity and permeability) and therefore, in thermal conductivity.Sensitivity analyses addressing relevant geological questions show not only the versatility of the code but also, new perspectives on forward low-temperature thermochronological modeling.Groundwater circulation through pure-sandstone settings produce colder thermal architectures than those obtained in impermeable domains.Differences in cooling ages from models with and without fluid circulation are up to 5 Myr.A 4-fold variation in thrusting rates(0.5 km/Myr to 2 km/Myr) produces a 15-Myr difference in cooling ages in models with fluid flow, which contrasts to much lower differences, only 2 Myr, in domains without(or minimal) fluid circulation.2D thermal solutions in fold-bend-fold thrust belts composed of sandstones remain static despite substantial relief development by kinematic folding.A case-study from Western Argentina, in the Andean Precordillera, confirms the plausibility of the numerical algorithm here posed and raises new questions on the first-order thermal controls in settings under deformation.