Periodic drainage of ice-dammed lakes as a result of variations in glacier velocity

Previous discussions of the catastrophic drainage of ice-dammed lakes have centred on mechanisms where characteristics of the lake are crucial to drainage initiation, for example dam flotation or tunnel formation at a critical lake depth. This paper describes a mechanism for lake drainage where drainage initiation depends on the characteristics of the glacier and is independent of the characteristics of the lake. Prediction of this mechanism must be based on glacier dynamics, whereas the mechanisms most commonly discussed previously are best predicted primarily on the basis of lake evolution. An ice-dammed lake at the margin of the glacier Solheimajokull, in southern Iceland, was observed to drain rapidly into the sub- or englacial drainage system, supplying water and debris to the bed or interior of the glacier. Geomorphological evidence suggests that the lake drains and refills periodically, discharging up to 13300 m³ of water into the glacier-hydrological system. The depth of the maximum lake is insufficient to cause either flotation of the ice margin or tunnel opening by plastic deformation of the ice, and we suggest that sudden drainage is related to ice-bed separations associated with specific glacier flow states rather than to a critical lake depth threshold. This mechanism of lake drainage has implications for conditions at the glacier bed, for the development of basal ice and for the entrainment of debris into the glacier, as well as for the prediction of potentially hazardous catastrophic drainage events and jokulhlaups from ice-dammed lakes.     

Improving Groundwater Model Calibration with Repeat Microgravity Measurements

Groundwater-flow models depend on hydraulic head and flux observations for evaluation and calibration. A different type of observation—change in storage measured using repeat microgravity—can also be used for parameter estimation by simulating the expected change in gravity from a groundwater model and including the observation misfit in the objective function. The method is demonstrated using new software linked to MODFLOW input and output files and field data from the vicinity of the All American Canal in southeast California, USA. Over a 10-year period following lining of the previously highly permeable canal with concrete, gravity decreased by over 100 μGal (equivalent to about 2.5 m of free-standing water) at some locations as seepage decreased and the remnant groundwater mound dissipated into the aquifer or was removed by groundwater pumping. Simulated gravity from a MODFLOW model closely matched observations, and repeat microgravity data proved useful for constraining both hydraulic conductivity and specific yield estimates. Specific yield estimated using the infinite-horizontal slab approximation agreed well with model-derived values, and the departure from the linear, flat-water-table approximation was small, less than 2%, despite relatively large and dynamic water-table slope. First-order second-moment parameter uncertainty analysis shows reduction in uncertainty for all hydraulic conductivity and specific yield parameter estimates with the addition of repeat microgravity data, as compared to drawdown data alone.     

Apportioning deformation among depth intervals in an aquifer system using InSAR and head data

Land surface subsidence due to excessive groundwater pumping is an increasing concern in California, USA. Interferometric Synthetic Aperture Radar (InSAR) is a remote sensing technique for measuring centimeter-to-millimeter surface deformation at 10–100 m spatial resolution. Here, a data-driven approach that attributes deformation to individual depth intervals within an aquifer system by integrating head data acquired from each of three screened intervals in a monitoring well with InSAR surface deformation measurements was developed. The study area was the Colusa Basin in northern Central Valley. To reconstruct the surface deformation history over the study area, 13 ALOS-PALSAR scenes acquired between 2006 and 2010 were processed. Up to ~3-cm year^?1 long-term subsidence and up to ~6 cm seasonal subsidence were observed using the InSAR technique. The technique developed in this paper integrates the InSAR-observed seasonal deformation rate and the co-located head measurements in multiple depth intervals to estimate the elastic skeletal storage coefficient, the time delay between the head change and the observed deformation, and subsequently the deformation of each depth interval. This technique can be implemented when hydraulic head measurements within each depth interval are not correlated with each other. Using this approach, the depth interval that contributed the most to the total subsidence, as well as storage parameters for all intervals, are estimated. The technique can be used for identification of the depth interval within the aquifer system responsible for deformation.

     

Distribution of platinum-group elements in magmatic and altered ores in the Jinchuan intrusion, China: an example of selenium remobilization by postmagmatic fluids

The division of platinum-group elements (PGE) between those hosted in platinum-group minerals (PGM) versus those in solid solution in base metal sulfides (BMS) has been determined for ores from the PGE-bearing Ni-Cu-rich Jinchuan intrusion in northwest China. All the BMS are devoid of Pt and Ir, and magmatic BMS are also barren of Rh. These PGE may have been scavenged by arsenic to form PGM during magmatic crystallization of the BMS. Pd, Os, and Ru are recorded in BMS and Pd is predominantly in solid solution in pentlandite. Unlike the fresh magmatic ores, in altered or serpentinized ores, Pd-PGM are present. Froodite is hosted in magnetite, formed during alteration of BMS, accompanied by sulfur loss and liberation of Pd. Michenerite ([Pd,Pt]BiTe), sperrylite (PtAs₂), and Au-bearing PGM are located in altered silicates. Irarsite (IrAsS) occurs mainly enclosed in BMS. Padmaite (PdBiSe), identified at the junctions of magnetite and BMS, was the last PGM to form and locally partially replaces earlier non-Se-bearing PGM. We propose that padmaite formed under oxidizing conditions during late local remobilization of Se from the BMS. Se-bearing PGM are rare and our review shows they are frequently associated with carbonate, suggesting that Pd and Se can be mobilized great distances in low pH oxidizing fluids and may be precipitated on contact with carbonate. S/Se ratios are used by researchers of magmatic Ni-Cu-PGE ores to determine sulfur loss, assuming Se is immobile and representative of magmatic sulfur content. This study shows that Se as well as S is potentially mobile and this should be considered in the use of S/Se ratios.     

Quantification of methane emission from bacterial mat sites at Quepos Slide offshore Costa Rica

Seafloor methane emission from the Quepos Slide on the submarine segment of the Costa Rica fore-arc margin was estimated by extrapolating flux measurements from individual seeps to the total area covered by bacterial mats. This approach is based on the combination of detailed mapping to determine the abundance of seeps and the application of a numerical model to estimate the amount of benthic methane fluxes. Model results suggest that the majority of the studied seeps transport rather limited amount of methane (on average: ~177 μmol cm^?2 a^?1) into the water column due to moderate upward advection, allowing for intense anaerobic oxidation of methane (AOM; on average: 53 % of the methane flux is consumed). Depth-integrated AOM rates (56–1,538 μmol CH₄ cm^?2 a^?1) are comparable with values reported from other active seep sites. The overall amount of dissolved methane released into the water column from the entire area covered by bacterial mats on the Quepos Slide is estimated to be about 0.28 × 10⁶ mol a^?1. This conservative estimate which relies on rather accurate determinations of seafloor methane fluxes emphasizes the potential importance of submarine slides as sites of natural methane seepage; however, at present the global extent of methane seepage from submarine slides is largely unknown.     

The algal community at an ecocline of a cold sulphidic spring (Sovra artesian borehole,Slovenia)

The physicochemical parameters of the sulphide spring water from a 500?m deep artesian borehole in Sovra Valley (Slovenia) are stable, with very little variation: temperature, 9.2 ± 0.0 °C; pH 7.70 ± 0.11; specific electrical conductivity, 777 ± 8 μS/cm; and dissolved oxygen, 0.19 ± 0.11 mg/l. The water from the borehole is hard, rich in sulphates, and has a notable concentration of sulphide, while it is low in chlorides. Communities of phototrophs were analysed at the oxygenic ecocline at the outflow from the borehole, and from further downstream. Caloneis tenuis, Frustulla vulgaris, Gomphonema sp., Navicula radiosa, Oscillatoria sp., and Tribonema vulgare successfully thrive exclusively at the outflow from the borehole under sub-optimum conditions for the majority of phototrophs. Downstream from the borehole, where the hydrogen sulphide degasses, autotrophic biofilms were dominated by different diatoms. The Bray–Curtis similarity index confirms the distinctive phototrophic communities along the oxygenic ecocline downstream from the sulphidic spring. The sulphidic ecocline downstream from the spring is indicative of the composition of phototrophic communities, as some species appear only downstream from the spring. An ecocline downstream from the borehole of the sulphidic spring was reflected also in the bacterial indicator groups. This study brings novel insights to the limited knowledge in the field of oxygenic phototrophy related to sulphidic springs.     

Interactions between European agricultural policy and climate change: a Slovenian case study

This article analyses the interactions between agricultural policy measures in the EU and the factors affecting GHG emissions from agriculture on the one hand, and the adaptation of agriculture to climate change on the other. To this end, the article uses Slovenia as a case study, assessing the extent to which Slovenian agricultural policy is responding to the challenges of climate change. All agricultural policy measures related to the 2007–2013 programming period were analysed according to a new methodological approach that is based on a qualitative (expert evaluation) and a quantitative (budgetary transfers validation) assessment. A panel of experts reached consensus on the key factors through which individual measures affect climate change, in which direction and how significantly. Data on budgetary funds for each measure were used as weights to assess their relative importance. The results show that there are not many measures in (Slovenian) agricultural policy that are directly aimed at reducing GHG emissions from agriculture or at adaptation to climate change. Nevertheless, most affect climate change, and their impact is far from negligible. Current measures have both positive and negative impacts, but overall the positive impacts prevail. Measures that involve many beneficiaries and more budgetary funds had the strongest impact on aggregate assessments. In light of climate change, agricultural policy should pay more attention to measures that are aimed at raising the efficiency of animal production, as it is the principal source of GHG emissions from agriculture.

Policy relevance

Agricultural policy must respond to climate challenges and climate change impact assessment must be included in the process of forming European agricultural policy. Agricultural policy measures that contribute to the reduction of emissions and adaptation, whilst acting in synergy with other environmental, economic and social goals, should be promoted. The approach used in this study combines qualitative and quantitative data, yielding an objective assessment of the climate impact of agricultural policy measures and providing policy makers with a tool for either ex ante or ex post evaluations of climate-relevant policy measures.