Wildfire preparedness,community cohesion and social–ecological systems

The consequences of wildfires are felt in susceptible communities around the globe on an annual basis. Climate change predictions in places like the south-east of Australia and western United States suggest that wildfires may become more frequent and more intense with global climate change. Compounding this issue is progressive urban development at the peri-urban fringe (wildland–urban interface), where continued infrastructure development and demographic changes are likely to expose more people and property to this potentially disastrous natural hazard. Preparing well in advance of the wildfire season is seen as a fundamental behaviour that can both reduce community wildfire vulnerability and increase hazard resilience – it is an important element of adaptive capacity that allows people to coexist with the hazardous environment in which they live. We use household interviews and surveys to build and test a substantive model that illustrates how social cohesion influences the decision to prepare for wildfire. We demonstrate that social cohesion, particularly community characteristics like ‘sense of community’ and ‘collective problem solving’, are community-based resources that support both the adoption of mechanical preparations, and the development of cognitive abilities and capacities that reduce vulnerability and enhance resilience to wildfire. We use the results of this work to highlight opportunities to transfer techniques and approaches from natural hazards research to climate change adaptation research to explore how the impacts attributed to the social components of social–ecological systems can be mitigated more effectively.     

Subduction and back-arc activity at the Hikurangi convergent Margin,New Zealand

The Hikurangi Margin is a region of oblique subduction with northwest-dipping intermediate depth seismicity extending southwest from the Kermadec system to about 42°S. The current episode of subduction is at least 16–20 Ma old. The plate convergence rate varies along the margin from about 60 mm/a at the south end of the Kermadec Trench to about 45 mm/a at 42°S. The age of the Pacific lithosphere adjacent to the Hikurangi Trench is not known.The margin divides at about latitude 39°S into two quite dissimilar parts. The northern part has experienced andesitic volcanism for about 18 Ma, and back-arc extension in the last 4 Ma that has produced a back-arc basin onshore with high heaflow, thin crust and low upper-mantle seismic velocities. The extension appears to have arisen from a seawards migration of the Hikurangi Trench north of 39°S. Here the plate interface is thought to be currently uncoupled, as geodetic data indicate extension of the fore-arc basin, and historic earthquakes have not exceededM _s=7.South of 39°S there is no volcanism and a back-arc basin has been produced by downward flexure of the lithosphere due to strong coupling with the subducting plate. Heatflow in the basin is normal. Evidence for strong coupling comes from historic earthquakes of up to aboutM _s=8 and high rates of uplift on the southeast coast of the North Island.The reason for this division of the margin is not known but may be related to an inferred increase, from northeast to southwest, in the buoyancy of the Pacific lithosphere.     

Calculated mineral equilibria in the greenschist-blueschist-eclogite facies in Na2O−FeO−MgO−Al2O3−SiO2−H2O

The new, greatly expanded internally-consistent dataset of Holland and Powell includes thermodynamic data for a wide range of mineral end-members in common rock-forming minerals, in particular, including FeMg_-1 substitutions in glaucophane, garnet, chloritoid and carpholite, and FeMg_-1 and MgSiAl_-1Al_-1 substitutions in talc and chlorite. Moreover, we have the uncertainties and correlations for these data. With the data, we have calculated the full pressure-temperature phase diagram for the system Na₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (NFMASH) for quartz (or coesite) and H₂O in excess, in the range 300°–800°C and 5–50 kbars. By solving the set of non-linear equations formed by the equilibrium relationships for an independent set of equations between the end-members in an assemblage in NFMASH, the compositions of the minerals (and PT) can be calculated. Thus the changes in MgSiAl_-1Al_-1 along NMASH reactions, and FeSiAl_-1Al_-1 along NFASH reactions, are calculated, and the changes in FeMg_-1 and MgSiAl_-1Al_-1 along NFMASH reactions are calculated. From this information it is straightforward to generate PT diagrams for specific rock compositions. Mineral assemblages and mineral compositional changes in the phase diagram are discussed in relation to greenschist, blueschist and eclogite facies assemblages in metapelitic rocks. It is found that the correspondence between the predictions of the phase diagrams and the observations on rocks is remarkably good. When semiquantitative extensions of the phase diagram to include Ca(MgFe)_-1, NaSiCa_-1Al_-1, Fe³⁺Al_-1 and KNa_-1 substitutions are taken into account the agreement is essentially complete.     

Structural control and origin of volcanism in the Taupo volcanic zone,New Zealand

Taupor volcanic zone (TVZ) is the currently active volcanic arc and back-arc basin of the Taupo-Hikurangi arc-trench system, North Island, New Zealand. The volcanic arc is best developed at the southern (Tongariro volcanic centre) end of the TVZ, while on the eastern side of the TVZ it is represented mainly by dacite volcanoes, and in the Bay of Plenty andesite/dacite volcanoes occur on either side of the Whakatane graben. The back-arc basin is best developed in the central part of the TVZ and comprises bimodal rhyolite and high-alumina basalt volcanism. Widespread ignimbrite eruptions have occurred from this area in the past 0.6 Ma. Normal faults occur in both arc and back-arc basin. They are generally steeply dipping (>40°) and strike between 040° and 080°. In the back-arc basin, fault zones are en echelon and have the same trend as alignments of rhyolite domes and basalt vents. Open fissures have formed during historic earthquakes along some of the faults, and geodetic measurements on the north side of Lake Taupo suggest extension of 14±4 mm/year. In the Bay of Plenty and M_L=6.3 earthquake occurred on 2 March 1987. Modelling of known structure in the area together with data derived from this earthquake suggests block faulting with faults dipping 45°±10° NW and a similar dip is suggested by seismic profiling of faults offshore of the Bay of Plenty where extension is estimated to be 5±2 mm/year. To the east of the TVZ, the North Island shear belt (NISB) is a zone of reverse-dextral, strike-slip faults, the surface expression of which terminates at the eastern end of the TVZ. On the opposite side of the TVZ in the offshore western Bay of Plenty and on line with the NISB is the Mayor Island fault belt. If the two fault belts were once continuous, as seems likely, strike-slip faults probably extend through the basement of the TVZ. When extension associated with the arc and back-arc basin is combined with these strike-slip faults, the resulting transtension provides a suitable tectonic environment for caldera formation and voluminous ignimbrite eruptions in the back-arc basin. The types of volcano in the TVZ are considered to be related to the source of magma and overlying crustal structure. Lavas of the arc are probably formed by a multistage process involving (1) subsolidus slab dehydration, (2) anatexis of the mantle wedge, (3) fractionation and minor crustal assimilation and (4) magma mixing. High-alumina basalts of the back-arc basin may be derived by partial melting of peridotite at the top of the mantle wedge, while rhyolitic magmas are thought to come from partial melting of lavas and subvolcanic reservoirs associated with the southern end of the Coromandel volcanic zone. Extreme thinning associated with transtension in the back-arc basin will favour the eruption of large-volume, gas-rich ignimbrites accompanied by caldera formation.     

Alluvial gold in Kalimantan, Indonesia: A colloidal origin?

Extensive placer gold deposits occur in Quaternary palaeochannels in the Ampalit and Cempaga Buang drainage basins near Kasongan, Central Kalimantan, Indonesia. Broad interfluvial Pleistocene terraces surrounding the drainages also contain significant amounts of placer gold. The “channel” and “terrace” gold deposits together cover an area in excess of 180 km².Exploration for gold at Ampalit followed traditional alluvial methods, and assumed that mechanical and gravitational factors were the principal mechanisms affecting gold accumulation and concentration. Gold was considered to be physically reworked from terraces and redeposited in the present drainage channels or underlying, laterally displaced, palaeochannels. However, a comparison of gold grains from the Ampalit drainage channel and adjacent terraces indicates that gold grains in the drainage channels are possibly of colloidal origin and not mechanically transported to their present domain.The morphology of gold grains from the Ampalit drainage is compared with grains from adjacent terraces, using scanning electron microscopy and atomic force microscopy. The latter procedure allows for nondestructive analysis to give true three dimensional surface topography down to nanometre resolution. Evidence from force microscopy supports a colloidal origin for gold aggregates.The average purity of gold produced from the Ampalit dredging operation is 970 fine (970/1000) and the majority of examined gold grains extracted from beneath the drainage channel have a purity of 998 fine. This unusually high degree of purity suggests a selective dissolution/aggregation mechanism. We propose that gold is transported downward and laterally in groundwater percolating through the terrace sands and gravels to the current drainage as a humic acid-stabilised colloid. As the pregnant groundwater migrates toward the present drainage channels, it encounters a sleep chemical gradient and the colloid aggregates. The aggregation process occurs near clay zones within palaeochannel sands and gravels beneath the present river sediments. Here the colloidal aggregates form small grains (usually <1 mm) of extremely high purity.Today, the inherently unstable gold deposits at Ampalit are in a state of both aggregation and dissolution. Identification of low energy zones, location of point bar lags in palaeo and recent drainage channels, and the extrapolation of areas of low energy are not solely valid as exploration guides for gold accumulation in this environment. Exploration methods that also recognise ground water migration and composition, and the geochemical controls of dissolution and aggregation, will improve the ability to identify ore accumulations, thus contributing to improved economics of mining these deposits.     

Determining Paleosol Topography Using Seismic Refraction

The seismic refraction reversed profiling technique has been used to investigate the topography of the last interglacial soil (paleosol S1) within the central Chinese Loess Plateau near Xifeng. The results suggest an essentially flat-lying soil at a depth which varies by only a few meters over an area of more than 10 km². In addition, the results indicate a high-velocity layer at 50-60 m depth which is thought to coincide with a layer of carbonate concretions at the base of paleosol S5. The results agree well with the local loess-paleosol stratigraphy for this area and indicate that the seismic refraction method is a rapid technique for investigating paleotopography.     

Composition,oxygen isotope geochemistry and origin of smectite in the metalliferous sediments of the Bauer Deep,southeast Pacific

The sediments of the Bauer Deep, an open ocean basin situated on the northwest Nazca Plate in the southeast Pacific, constitute a regional metalliferous deposit dominated by authigenic smectite.Two 2-metre long cores from the Bauer Deep were examined to investigate the nature and origin of the smectite.Infra-red and Mossbauer spectroscopy and wet chemical analysis (LiBO₂ fusion) of isolated smectite, indicate the mineral is a Mg-rich, Al-rich nontronite. Oxygen isotopic compositions for isolated smectite are uniform and translate to a non-hydrothermal temperature of formation of about 3°C. SEM observations show an abundance of well-preserved biogenic opal in surface and near surface sediment but postburial dissolution and transformation of this phase to smectite is evident at depth.Smectite formation is the result of interaction between iron oxyhydroxide, ponded in the Bauer Deep following a hydrothermal origin at the adjacent East Pacific Rise, and biogenic opal. A reaction mechanism is proposed.Regional factors control smectite formation. In particular, formation is inhibited in areas of CaCO₃ accumulation (topographic elevations) but favoured in areas of oxyhydroxide and opal ponding (topographic depressions).     

Distribution and mode of occurrence of zinc and lead in glacial soils

The distribution and mode of occurrence of zinc and lead have been examined in glacial soils developed over a complex Precambrian marble-paragneiss terrain in the Adirondack Mountains of New York. Based on distribution within the soil profiles, zinc is enriched in the B₁ horizon of soils sampled over marble and lead is generally enriched in the A horizon, particularly in soils developed over paragneiss. Contrast is calculated using

Full-size image (1K)

, where is the mean of n_A anomalous and n_B background samples, and S_p is the pooled standard deviation) for zinc, lead and cold-extractable heavy metals in soils sampled over marble and paragneiss. The t-values indicate that the B₁, soil horizon is the most suitable for sampling on a regular basis, even though lead is most concentrated in the A horizon.The distribution of zinc and lead among exchangeable, organic, iron-manganese oxide, clay, silt and sand fractions of B₁ horizons from two anomalous and one background soil indicates that both zinc and lead are tied up principally in iron and manganese oxides. The anomalous samples exhibit zinc enrichment in the Fe-oxide digestion and high Mn/Fe ratios for the Mn-oxide digestion (as well as the total analysis). In terms of total contribution to the sample, significant proportions of zinc in the clastic fraction can be attributed to zinc substitution into clays plus the ineffective removal of Fe-oxides by the ammonium oxalate extraction procedure. Lead, on the other hand, occurs in significant concentrations in clay, silt and sand as well as Fe- and Mn-oxides, probably as a trace constituent in feldspars or adsorbed onto clay surfaces.     

Origin of dacites of Taupo Volcanic Zone, New Zealand

Dacites form a relatively small proportion of lavas in the Taupo Volcanic Zone, New Zealand (5km³), and occur mainly on the eastern side. In this paper their origin is considered in terms of three processes: (a) partial melting of crustal rocks; (b) fractional crystallisation of basalt and andesite; and (c) sub-surface mixing of basic and acid magma. Modelling techniques are used to calculate the most acceptable degree of fractional crystallisation and magma mixing to fit major-element data, and these values are used to compare calculated and observed trace-element values. The success or failure of the model is determined by the closeness of the two sets of values. For partial-melt models, trace-element values alone are calculated by the batch-melting equation.Results indicate that White Island dacite can best be modelled by fractional crystallisation; Manawahe by fractional crystallisation plus limited crustal contamination; Maungaongaonga by partial melting of Western Basement greywacke, and Tauhara by partial melting of this greywacke together with minor mixing with a more basic magma. Results from Parekauau and Horohoro indicate that these lavas are unlikely to have formed by any of the processes examined.