Lateral load pattern in pushover analysis

The seismic capacity curves of three types of buildings including frame, frame-shear wall and shear wall obtained by pushover analysis under different lateral load patterns are compared with those from nonlinear time history analysis. Based on the numerical results obtained a two-phase load pattern; an inverted triangle (first mode) load pattern until the base shear force reachesβ times its maximum value, V_max, followed by a (x/H)^α form, hereβ and α being some coefficients depending on the type of the structures considered, is proposed in the paper, which can provide excellent approximation of the seismic capacity curve for low-to-mid-rise shear type buildings. Furthermore, it is shown both the two-phase load pattern proposed and the invariant uniform pattern can be used for low-to-mid-rise shear-bending type and low-rise bending type of buildings. No suitable load patterns have been found for high-rise buildings.     

GIS-based spatial and temporal prediction system development for regional land subsidence hazard mitigation

An integrated GIS-based approach for establishing a spatial and temporal prediction system for groundwater flow and land subsidence is proposed and applied to a subsidence-progressed Japanese coastal plain. Various kinds of fundamental data relating to groundwater flow and land subsidence are digitized and entered into a GIS database. A surface water hydrological cycle simulation is performed using a GIS spatial data operation for the entire plain, and the spatial and temporal groundwater infiltration quantity is hereby obtained. Through the data transformation from the GIS database to a groundwater flow code (MODFLOW), a 3D groundwater flow model is established and unsteady groundwater flow simulation for the past 21 years is conducted with results which compare satisfactorily with observed results. Finally, a Visual Basic code is developed for land subsidence calculations considering aquifer and aquitard deformation. Future land subsidence in the plain is predicted assuming different water pumping scenarios, and the results provide important information for land subsidence mitigation decision-making.     

OSL dating of glacial deposits during the Last Glacial in the Terskey-Alatoo Range, Kyrgyz Republic

Optically stimulated luminescence (OSL) dating was applied to glacial and loess deposits in the north flank of the Terskey-Alatoo Range, Kyrgyz Republic, to elucidate the glacier chronology of the central Asian mountains during the Last Glacial. Moraines in five parts of study area were classified into four stages (Terskey Stages I–IV) based on their geographical position and elevation, and their moraine rock weathering. According to this classification, the oldest moraines (Terskey Stage I) were at 2100–2250 m a.s.l. and the second-oldest moraines (Terskey Stage II) were at 2400–2700 m a.s.l. Quartz samples from moraines of these two stages were used for OSL dating. The OSL ages of the quartz samples indicate that glacier expansion in the Terskey Stage II occurred between 21 and 29 ka BP.     

基于GIS的住宅区周边危险边坡三维稳定性评价

为了评价日本千叶县某住宅区周边大范围边坡的滑坡危险度,探讨了一种基于GIS的三维边坡稳定性评价方法。首先根据已有的CAD格式的地形等高线图及有限的钻孔数据,得到地表、地层、地下水的三维GIS数据。在依据边坡倾角、倾向等地形特性对该大范围边坡划分边坡单元的基础上,采用一种基于GIS栅格数据的边坡稳定三维极限平衡分析模型计算了研究区域各边坡单元的安全系数,进行了滑坡危险性分区评价。本研究对于如何利用有限的现场调查数据来进行高精度的数值计算分析,以及GIS在地质防灾领域的更深层次的应用具有一定的参考价值。     

Measurement of lower-stratospheric aerosol by a balloon-borne photometer

Height distribution of the stratospheric aerosol extinction coefficient was measured in the altitude range 10 to 20 km by a balloon-borne multi-color sunphotometer in May 1978. It is demonstrated that detailed structures of the distribution of stratospheric aerosol can be remotely measured by the solar occultation method as well as by lidar andin situ particle counter observations. In the aerosol layer appearing at 18 km altitude the extinction coefficient at 800–1000 nm wavelength reached to 3×10^–7 m^–1, which was reasonable compared with lidar observations. Wavelength dependence of the aerosol optical depth was crudely estimated to be proportional to ^–1.5.     

Hydrogen isotope fractionation between OH-bearing minerals and water

Hydrogen isotope fractionation factors between hydroxyl-bearing minerals and water were determined at temperatures ranging between 400 and 850°C. The hydrogen isotope exchange rates for the mineral-water pairs examined were very slow. In most cases it was necessary to use an interpolation method for the determination of the hydrogen isotope equilibrium fractionation factor, α_e.For the temperature range of 450–850°C the hydrogen isotope fractionation factors for the mica-water and amphibole-water systems are simply expressed as a function of temperature and the molar fractions of the six-fold coordinated cations in the crystal, regardless of mineral species, as follows: 10³ In α_{e(mineral-water)} = ? 22.4 (10⁶T^?2) + 28.2 + (2X_Al ? 4X_Mg ? 68X_Fe), where X is the molar fraction of the cations. As the equation indicates, for any specific composition of the OH-bearing minerals, the change of α_e with temperature, over the temperature range investigated, is the same for all minerals studied. Thus for any specified values of X_Al, X_Mg, and X_Fe for these minerals, the relationship between α_e and T is 10³ In α_e = αT^?2 + k. Consequently, hydrogen isotope fractionation among coexisting minerals is temperature independent and cannot be used as a hydrogen isotope geothermometer.Some exceptions to the above general observations exist for minerals such as boehmite and kaolinite. In these minerals hydrogen bonding modifies the equilibrium hydrogen isotopic fractionation between mineral and water.     

Homogenization‐based analysis of anisotropic damage in brittle materials with unilateral effect and interactions between microcracks

This paper is devoted to micromechanical modeling of induced anisotropic damage in brittle geomaterials. The formulation of the model is based on a proper homogenization procedure by taking into account unilateral effects and interactions between microcracks. The homogenization procedure is developed in the framework of Eshelby's inclusion solution and Ponte‐Castaneda and Willis (J. Mech. Phys. Solids 1995; 43 :1919–1951) estimate. The homogenization technique is combined with the thermodynamics framework at microscopic level for the determination of damage evolution law. A rigorous crack opening–closure transition condition is established and an energy‐release‐rate‐based damage criterion is proposed. Computational aspects on the implementation of micromechanical model are also discussed. The proposed model is evaluated by comparing numerical predictions with experimental data for various laboratory tests on concrete. Parametric studies on unilateral effects and influences of microcracks interactions are finally performed and analyzed. Copyright © 2008 John Wiley & Sons, Ltd.     

Pressure dependence of Néel transition in (Mg,Fe)O

Pressure dependence of Néel temperature (T _N) in (Mg_0.20Fe_0.80)O, (Mg_0.25Fe_0.75)O, and (Mg_0.30Fe_0.70)O was newly measured up to 1.14 GPa, using superconducting quantum interference device magnetometer and piston–cylinder-type pressure cell under hydrostatic condition. The dT _N/dP values of (Mg_0.20Fe_0.80)O, (Mg_0.25Fe_0.75)O, and (Mg_0.30Fe_0.70)O were determined as 4.0 ± 0.3, 2.7 ± 0.3, and 4.4 ± 0.4 K/GPa, respectively, in linear approximation; however, the T _N deviated from the linearity under nonhydrostatic conditions. The compositional dependence of dT _N/dP in (Mg_1?X Fe _X )O showed a rapid decay with increasing Mg components at X ≥ 0.75 and the trend ended at X = 0.70. The estimated Néel transition pressure at room temperature by extrapolating these linearities are very similar to the rhombohedral distortion determined by previous X-ray diffraction studies for X ≥ 0.75, which suggests that the rhombohedral phase of (Mg_1?X Fe _X )O (X ≥ 0.75) at room temperature is antiferromagnetic under hydrostatic conditions.     

Chaotic Itinerancy and Thermalization in a One-Dimensional Self-Gravitating System

Long time behavior of one-dimensional self-gravitating system is numerically investigated. Itinerant behavior among quasiequilibria is discovered, and its origin is clarified. The macroscopic distributions of the quasiquilibria are different from the isothermal distribution, but the transient states, which appears between two successive quasiequilibria, resemble the isothermal distribution. Averaging over the is itinerancy gives approximately the thermal equilibrium. This revised version was published online in July 2006 with corrections to the Cover Date.     

On the opaque core appearing in the early phase of star formation

The spherical collapse of a protostar with one solar mass is calculated from a gravitationally unstable initial stage, by solving the equations of hydrodynamics and pherical radiative transfer. The temperature dependence of the dust opacity is taken into account in contrast to the earlier calculations with temperature independent opacities. It is shown that the opaque core is equivalent to the adiabatic core in the purely adiabatic case. The blanketing effect of dust grains strengthens the shock of the opaque core and may result in raising the central entropy of protostars.Paper presented at the Conference on Protostars and Planets, held at the Planetary Science Institute, University of Arizona, Tucson, Arizona, between January 3 and 7, 1978.