Measurement of snow surface emissivity

Measurements of the snow surface emissivity for infrared radiation have been made with an infrared radiation thermometer. The mean value of the emissivity is estimated at = 0.970 ± 0.008.     

Bulk transfer coefficient over a snow surface

The drag coefficient C _D and the bulk transfer coefficient for sensible heat C _H over a flat snow surface were determined experimentally. Theoretical considerations reveal that C _D depends on the friction velocity u _* as well as on the geometrical roughness h of the snow surface. It is found that C _D increases with increasing u _* and/or h. The dependency of C _H on u _* and h is so small that it is possible to consider C _H as a constant for practical purposes: C _{H, 1} = 2.0 × 10^–3 for a reference height of 1 m. The bulk transfer coefficient for water vapor is estimated at C _{E, 1} = 2.1 × 10^–3 for a reference height of 1 m.     

Observation and modeling of thermally induced upslope flow

Thermally induced upslope flows were observed on several slopes and in valleys, and a simple one-layer model of upslope flow was developed. In this model, the thickness and speed of upslope flow are expressed in terms of sensible heat flux from the slope surface, drag coefficient of the slope surface, slope steepness and stability of the ambient atmosphere. Model results compare favorably with the observations.The development process in the upslope direction of a steady upslope flow was investigated with this model. A steadily developing state in the upslope direction is expressed by the dimensionless equations together with a unique parameter associated with momentum advection. The vertical distance of the slope required for well-developed upslope flow has a minimum value for a moderate slope steepness, but increases monotonously with decreasing ambient stability. The effect of unsteadiness on upslope flow was also investigated. The transient time required to reach a steady state becomes shorter with increasing ambient stability and slope steepness.     

Spatio-temporal estimation of shallow landslide hazard triggered by rainfall using a three-dimensional model

A shallow landslide triggered by rainfall can be forecast in real-time by modeling the relationship between rainfall infiltration and decrease of slope stability. This paper describes a promising approach that combines an improved three-dimensional slope stability model with an approximate method based on the Green and Ampt model, to estimate the time–space distribution of shallow landslide hazards. Once a forecast of rainfall intensity and slope stability-related data, e.g., terrain and geology data, are acquired, this approach is shown to have the ability to estimate the variation of slope stability of a wide natural area during rainfall and to identify the location of potential failure surfaces. The effectiveness of the estimation procedures described has been tested by comparison with a one-dimensional method and by application to a landslide-prone area in Japan.     

On the importance of accurately ray-traced troposphere corrections for Interferometric SAR data

Numerical weather models offer the possibility to compute corrections for a variety of space geodetic applications, including remote sensing techniques like interferometric SAR. Due to the computational complexity, exact ray-tracing is avoided in many cases and mapping approaches are applied to transform vertically integrated delay corrections into slant direction. Such an approach works well as long as lateral atmospheric gradients are small enough to be neglected. But since such an approximation holds only for very rare cases it is investigated how horizontal gradients of different atmospheric constituents can evoke errors caused by the mapping strategy. Moreover, it is discussed how sudden changes of wet refractivity can easily lead to millimeter order biases when simplified methods are applied instead of ray-tracing. By an example, based on real InSAR data, the differences of the various troposphere correction schemes are evaluated and it is shown how the interpretation of the geophysical signals can be affected. In addition, it is studied to which extend troposphere noise can be reduced by applying the exact ray-tracing solution.     

Asymmetric tropospheric delays from numerical weather models for UT1 determination from VLBI Intensive sessions on the baseline Wettzell–Tsukuba

One-baseline 1-h Very Long Baseline Interferometry (VLBI) Intensive sessions are carried out every day to determine Universal Time (UT1). Azimuthal asymmetry of tropospheric delays around the stations is usually ignored and not estimated because of the small number of observations. In this study we use external information about the asymmetry for the Intensive sessions between Tsukuba (Japan) and Wettzell (Germany), which are carried out on Saturdays and Sundays (1) from direct ray-tracing for each observation at Tsukuba and (2) in the form of linear horizontal north and east gradients every 6 h at both stations. The change of the UT1 estimates is at the 10 μs level with maximum differences of up to 50 μs, which is clearly above the formal uncertainties of the UT1 estimates (between 5 and 20 μs). Spectral analysis reveals that delays from direct ray-tracing for the station Tsukuba add significant power at short periods (1–2 weeks) w.r.t. the state-of-the-art approach, and comparisons with length-of-day (LOD) estimates from Global Positioning System (GPS) indicate that these ray-traced delays slightly improve the UT1 estimates from Intensive sessions.     

Style of fluid flow and deformation in and around an ancient out-of-sequence thrust: An example from the Nobeoka Tectonic Line in the Shimanto accretionary complex, Southwest Japan

To understand the characteristics of deformation of an out-of-sequence thrust (OST) and the style of fluid flow along it, we investigated the Nobeoka Tectonic Line, which has been interpreted as a deep OST (7–9 km), in the Shimanto accretionary complex, Southwest Japan. The shear zone in the footwall differs significantly in the along-strike direction not only in thickness, which varied from 100 to 300 m, but also in lithology and mineral vein development. These variations might reflect primarily differences in lithology; that is, the sandstone-dominant shear zone with a large amount of mineral veins precipitated in microcracks is relatively thick, whereas the shale-dominant shear zone with a small amount of veins and with textures indicating highly pressurized pore fluid, is thinner. By comparison with characteristics of a shallow OST (3–5 km), we conclude that the shallow OST has experienced repeated brittle failure with rapid slip and focused fluid flow whereas the deep OST has experienced both brittle and ductile deformation, followed by fluid flow of various styles, depending on the lithology.     

Contamination status and accumulation profiles of organotins in sea otters (Enhydra lutris) found dead along the coasts of California, Washington, Alaska (USA), and Kamchatka (Russia)

Organotin compounds (OTs) including mono- to tri-butyltins, -phenyltins, and -octyltins were determined in the liver of adult sea otters (Enhydra lutris) found dead along the coasts of California, Washington, and Alaska in the USA and Kamchatka, Russia. Total concentrations of OTs in sea otters from California ranged from 34 to 4100ng/g on a wet weight basis. The order of concentrations of OTs in sea otters was total butyltins>total octyltins> or = total phenyltins. Elevated concentrations of butyltins (BTs) were found in some otters classified under 'infectious-disease' mortality category. Concentrations of BTs in few of these otters were close to or above the threshold levels for adverse health effects. Total butyltin concentrations decreased significantly in the livers of California sea otters since the 1990s. Based on the concentrations of organotins in sea otters collected from 1992 to 2002, the half-lives of tributyltin and total butyltins in sea otters were estimated to be approximately three years.     

Arsenic species and their accumulation features in green turtles (Chelonia mydas)

Total arsenic (As) and its compounds were determined in liver, kidney, muscle, and stomach contents of green turtles (Chelonia mydas). Total As concentrations in the muscle were higher than those in the kidney and liver. Arsenobetaine (AB) was the predominant compound in all the three tissues and its levels were positively correlated with total As concentrations. This indicates that AB greatly contributes to As accumulation in green turtles. Higher concentrations of remaining As in the sample after extraction were detected in the liver, implying that lipid-soluble or protein bound As compounds accumulate in the liver of green turtles. Total As levels in tissues showed significant negative correlations with standard carapace length. The size-dependence of As accumulation in green turtles may be related to their feeding habit, shifting from carnivore to herbivore at different growth stages. Concentrations of AB and dimethylarsinic acid (DMA) were low in the stomach contents but high in the tissues, implying bioaccumulation of these arsenicals in green turtles.     

空间三维滑坡敏感性分区工具及其应用

对于滑坡敏感性分区目前有三种方法:定性法、统计法和基于岩土定量模型的确定性方法。定性法基于对滑坡敏感性或灾害评估的人为判断;统计法用一个来源于结合了权重因子的预测函数或指标;而确定性法,或者说是物理定量模型法以质量、能量和动量守恒定律为基础。二维确定性模型广泛用于土木工程设计,而无限边坡模型(一维)也用于滑坡灾害分区的确定性模型。文中提出了一个新的基于GIS(地理信息系统)的滑坡敏感性分区系统,这个系统可用于从复杂地形中确认可能的危险三维(3-D)滑坡体。所有与滑坡相关的空间数据(矢量或栅格数据)都被集成到这个系统中。通过把研究区域划分为边坡单元并假定初始滑动面是椭球的下半部分,并使用Monte Carlo随机搜索法,三维滑坡稳定性分析中的三维最危险滑面是三维安全系数最小的地方。使用近似方法假定有效凝聚力、有效摩擦角和三维安全系数服从正态分布,可以计算出滑坡失稳概率。3DSlopeGIS是一个计算机程序,它内嵌了GIS Developer kit(ArcObjects of ESRI)来实现GIS空间分析功能和有效的数据管理。应用此工具可以解决所有的三维边坡空间数据解问题。通过使用空间分析、数据管理和GIS的可视化功能来处理复杂的边坡数据,三维边坡稳定性问题很容易用一个友好的可视化图形界面来解决。将3DSlopeGIS系统应用到3个滑坡敏感性分区的实例中:第一个是一个城市规划项目,第二个是预测以往滑坡灾害对临近区域可能的影响,第三个则是沿着国家主干道的滑坡分区。基于足够次数的Monte Carlo模拟法,可以确认可能的最危险滑坡体。这在以往的传统边坡稳定性分析中是不可能的。