Preliminary study on assessment of nutrient transport in the Taihu Basin based on SWAT modeling

With the Taihu Basin as a study area, using the spatially distributed and mechanism-based SWAT model, preliminary simulations of nutrient transport in the Taihu Basin during the period of 1995:_2002 has been carried out. The topography, soil, meteorology and land use with industrial point pollution discharge, the loss of agricultural fertilizers, urban sewerage, and livestock drainages were all considered in the boundary conditions of the simulations. The model was calibrated and validated against water quality monitoring data from 2001 to 2002. The results show that the annual total productions of nitrogen (TN) and phosphorus (TP) into Lake Taihu are 40000t and 2000t respectively. Nutrient from the Huxi Region is a major resource for Lake Taihu. The non-point source (surface source) pollution is the main form of catchment sources of nutrients into Lake Taihu, occupied TN 53% and TP 56% respectively. TN and TP nutrients from industrial point pollution discharge are 30% and 16%, and sewerage in both forms of point source and non-point source are TN 31% and TP 47%. Both the loss of agricultural fertilizers and livestock drainages from the catchment should be paid more attention as an important nutrient source. The results also show that SWAT is an effective model for the simulation of temporally and spatially nutrient changes and for the assessment of the trends in a catchment scale.     

低周反复荷载下Q460钢材框架柱抗震性能分析

为了进一步完善Q460钢材在抗震设计规范中相关限值的要求,本文利用有限元软件ABAQUS,以轴压比、翼缘宽厚比、腹板高厚比和壁板宽厚比为变量,建立了共48根“工”字型框架柱和“箱”型框架柱,分析了其抗震性能。结果表明:翼缘宽厚比对框架柱的能量耗散系数影响较小;能量耗散系数随轴压比、腹板高厚比（“工”字型）和壁板宽厚比（“箱”型）增大而明显减小;框架柱的极限承载力随轴压比的减小及壁板宽厚比和翼缘宽厚比的增大而逐渐增大,当腹板高厚比接近规范限值时,承载力下降趋势明显增大。与采用Q235钢材的框架柱相比,Q460钢材框架柱的延性较小,仅为2左右;当采用Q460钢材时,“工”字型框架柱的极限位移角限值建议取为0.03,“箱”型框架柱的极限位移角限值建议取为0.032。规范中对翼缘宽厚比限值的规定偏于保守,其值最大可取至9。无论是“工”字型框架柱还是“箱”型框架柱,其腹板高厚比均不宜过大。Q460钢材框架柱的刚度退化率随轴压比的增大而增强,且翼缘宽厚比越大,腹板高厚比越小,柱的初始刚度越大,刚度退化程度越明显。     

热力强迫对台风次级环流的作用

本文利用无量纲的台风次级环流方程,用西太平洋地区11年的综合台风资料,计算了热力因子强迫的次级环流。通过计算,得到主要结论如下: 1.非绝热加热和积云热量垂直混合是主要的热力强迫因子,二者的作用具有同样量级。 2.热量的湍流涡旋通量及积云的热量水平输送作用都比较小。 3.Ekman抽吸与积云热量垂直混合是相互促进,共同发展的。有利于次级环流的增强。     

An Improved Approach for Parameterizing Surface-Layer Turbulent Transfer Coefficients in Numerical Models

Based on classic iterative computation results, new equations to calculate the surface turbulent transfer coefficients are proposed, which allow for large ratios of the momentum and heat roughness lengths. Compared to the Launiainen scheme, our proposed scheme generates results closer to classical iterative computations. Under unstable stratification, the relative error in the Launiainen scheme increases linearly with increasing instability, even exceeding 15%, while the relative error of the present scheme is always less than 8.5%. Under stable stratification, the Launiainen scheme uses two equations, one for 0 < Ri _B ≤ 0.08 and another for 0.08 < Ri _B ≤ 0.2, and does not consider the condition that Ri _B > 0.2, while its relative errors in the region 0 < Ri _B ≤ 0.2 exceed 31 and 24% for momentum and heat transfer coefficients, respectively. In contrast, the present scheme uses only one equation for 0 < Ri _B ≤ 0.2 and another equation for Ri _B > 0.2, and the relative error of the present scheme is always less than 14%.     

Assessment of PPP integer ambiguity resolution using GPS,GLONASS and BeiDou (IGSO,MEO) constellations

Although integer ambiguity resolution (IAR) can improve positioning accuracy considerably and shorten the convergence time of precise point positioning (PPP), it requires an initialization time of over 30 min. With the full operation of GLONASS globally and BDS in the Asia–Pacific region, it is necessary to assess the PPP–IAR performance by simultaneous fixing of GPS, GLONASS, and BDS ambiguities. This study proposed a GPS + GLONASS + BDS combined PPP–IAR strategy and processed PPP–IAR kinematically and statically using one week of data collected at 20 static stations. The undifferenced wide- and narrow-lane fractional cycle biases for GPS, GLONASS, and BDS were estimated using a regional network, and undifferenced PPP ambiguity resolution was performed to assess the contribution of multi-GNSSs. Generally, over 99% of a posteriori residuals of wide-lane ambiguities were within ±0.25 cycles for both GPS and BDS, while the value was 91.5% for GLONASS. Over 96% of narrow-lane residuals were within ±0.15 cycles for GPS, GLONASS, and BDS. For kinematic PPP with a 10-min observation time, only 16.2% of all cases could be fixed with GPS alone. However, adding GLONASS improved the percentage considerably to 75.9%, and it reached 90.0% when using GPS + GLONASS + BDS. Not all epochs could be fixed with a correct set of ambiguities; therefore, we defined the ratio of the number of epochs with correctly fixed ambiguities to the number of all fixed epochs as the correct fixing rate (CFR). Because partial ambiguity fixing was used, when more than five ambiguities were fixed correctly, we considered the epoch correctly fixed. For the small ratio criteria of 2.0, the CFR improved considerably from 51.7% for GPS alone, to 98.3% when using GPS + GLONASS + BDS combined solutions.     

利用ARC/INFO进行三维地形模型的建立、处理和动态模拟

介绍了利用 ARC/ INFO建立三维地形模型的方法 ,以及利用其新版本的部分新功能处理三维地形模型、进行动态模拟的方法 ,与以往处理三维模型必须借助外部三维图形开发软件包的方法相比 ,具有高速、灵活、可视性强、支持强大分析功能等优点。形成的三维模型可随时与 ARC/ INFO的其它数据模型交换信息 ,与外部进程实时通讯 ,为使用者提供了二维分析工具所不能提供的信息 ,为开发视景仿真系统等与表面分析、立体显示有关的应用系统提供了强有力的支持。     

快速射电暴的数据统计

快速射电暴于2007年首次在脉冲星巡天的历史数据中被发现,是一种在射电波段观测到的具有色散量的单个强脉冲,其特征为持续时间仅为若干毫秒,峰值流量密度可达到央斯基量级。类似于射电脉冲星的单个脉冲,但其色散显著超过同一视线方向上银河系内星际介质的预期最大值。对截止2018年6月帕克斯望远镜、绿岸望远镜、阿雷西博射电望远镜、UTMOST望远镜和ASKAP望远镜已探测到的52例快速射电暴进行了观测量统计分析,根据模型扣除银河系星际介质导致的色散量后,快速射电暴平均色散量为584.5 pc·cm^-3,暗示着快速射电暴来自河外。通过最佳拟合估算红移幂律分布谱dN/dF_obs=4.14±1.30×F■sky^-1·day^-1。根据分析结果预计,FAST望远镜使用19波束接收机后,其多科学目标同时巡天在经过一年时间内能发现大约10个快速射电暴,将有效地扩大样本数量,为快速射电暴研究提供重要信息。     

应用土壤水模拟模型研究区域干旱

旨在应用平原地区土壤水模拟模型，给出区域旱精分析所需的干旱信息。以多年平均土壤含水量为判断旱情发生的临界函数，经过统计分析后，提出了一种适用于平原地区分析 区域旱情严重程度的实用方法和拟定评价旱情的定量标准。     

Late Quaternary clay minerals off Middle Vietnam in the western South China Sea: Implications for source analysis and East Asian monsoon evolution

High-resolution clay mineral records combined with oxygen isotopic stratigraphy over the past 450 ka during late Quaternary from Core MD05-2901 off Middle Vietnam in the western South China Sea are re-ported to reconstruct a history of East Asian monsoon evolution. Variations in Illite, chlorite, and kaolinite contents indicate a strong glacial-interglacial cyclicity, while changes in smectite content present a higher frequency cyclicity. The provenance analysis indicates a mixture of individual clay minerals from various sources surrounding the South China Sea. Smectite derived mainly from the Sunda shelf and its major source area of the Indonesian islands. Illite and chlorite originated mainly from the Mekong and Red rivers. Kaolinite was provided mainly by the Pearl River. Spectral analysis of the kaolin-ite/(illite chlorite) ratio displays a strong eccentricity period of 100 ka, implying the ice sheet-forced win-ter monsoon evolution; whereas higher frequency changes in the smectite content show an ice sheet-forced obliquity period of 41 ka, and precession periods of 23 and 19 ka and a semi-precession period of 13 ka as well, implying the tropical-forced summer monsoon evolution. The winter monsoon evolution is generally in coherence with the glacial-interglacial cyclicity, with intensified winter monsoon winds during glacials and weakened winter monsoon winds during interglacials; whereas the summer monsoon evolution provides an almost linear response to the summer insolation of low latitude in the Northern Hemisphere, with strengthened summer monsoon during higher insolation and weakened summer monsoon during lower insolation. The result suggests that the high-latitude ice sheet and low-latitude tropical factor could drive the late Quaternary evolution of East Asian winter and summer monsoons, respectively, implying their diplex and self-contained forcing mechanism.