介质横向不均匀对震后地表位移场的影响

利用三维有限元模拟两层地球模型(包括弹性层和粘弹性层)介质的横向不均匀和断层错动的复杂性对震后地表位移场的影响，其数值结果包括弹性解和粘弹性解。结果表明，震后位移场的分布特征不仅与粘弹性层的流变特性有关，还与弹性层介质的剪切模量以及断层的同震错动有关。     

Magnetic susceptibility variations of the Edicaran cap carbonates in the Yangtze platform and their implications for paleoclimate

1 INTRODUCTION One of the most intriguing phenomena in the late Neoproterozoic (~750 to 543 Ma) is the globa occurrence of thin carbonates that directly overlie glacial deposits in almost every continent (Kennedy 1996; Hoffman et al., 1998; Hoffman and Schrag 2002; Brasier and Shields, 2000; James et al., 2001 Jiang et al., 2003; Nogueira et al., 2003). These “cap carbonates”, commonly several to tens of meters thick, have attracted enormous interests because o their unusually negati…     

A New Pursuit Mode of Nonlinear Wave Surface

The numerical mode of nonlinear wave transformation based on both the Laplace equation for water field and the Bemoulli equation for water surface is a kind of time-domain boundary problem with initial conditions. And the basis for establishing the numerical mode of nonlinear wave in time domain is to trace the position of wave free surface and to calculale the instantaneous surface height and surface potential function. This paper firstly utilizes the ‘0-1‘ combined BEM to separate the boundary by means of discretization of Green‘ s integral equation based on the Laplace equation, then separates the free surface of wave with FEM and derives the FEM equation of wave surface that satisfies the nonlinear boundary conditions. By jointly solving the above BEM and FEM equations, the wave potential and surface height could be obtained with iteration in time domain. Thus a new kind of nonlinear numerical mode is established for calculating wave transformation. The wave test in the numerical wave tank shows that the numerical simulation with this mode is of high accuracy.     

Wave-Current Forces on Vertical Cylinders in Side-by-Side Arrangement for Irregular Waves Combined With Opposing Current

- The wave-current forces on vertical piles in side-by-side arrangement induced by irregular waves with opposing current are investigated experimentally in this paper. The characteristics in both time and frequency domain of in-line, lift and resultant forces are analyzed. The grouping effect coefficients of inline, lift and resultant forces on piles related to KC number and relative spacing parameters are given. These results are compared with those in the case of irregular waves combined with following currents. It is found that the results in these two cases are quite different. The range of KC number tested is 10- 60, the range of Reynolds number is (0.55-3.43) ×104.     

Wave-Current Forces on Small Square Cylinders (Part I)

-Based on the extended Morison Equation and model tests, the in-line forces on small square cylinders caused by waves (regular and irregular) and currents are analyzed in detail in this paper. The hydrodynamic coefficient CD and Cu related to KC number and the effect of direction of wave incidence are also given, which can be used in engineering practice.     

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.     

Wave-Current Forces on Slender Circular Cylinders

- A series model tests of wave forces by both regular and irregular waves combined with currents on single piles and bipiles in tandem and parallel arrays have been carried out. Based on Morison Equation, linear wave theory and linear wave spectrum theory as well, the characteristics of inline, lift and resultant forces on cylinders have been analyzed respectively. The drag, inertia and lift coefficients CD, CM and CL f皉 single piles related to KC number and the grouping effect coefficients of inline, lift and resultant forces on bipiles in tandem and parallel arrays related to KC number are given in this paper.     

Numerical Simulation of Multi-Directional Random Seas

Multi-directional irregular waves are simulated on the basis of the given directional spectrum using a double summation model, a single direction per frequency model and a single summation model. Their results are compared. It is shown that the single direction per frequency model proposed in this paper can generate a realistic wave field. The effects of the model parameters on the simulated results are also studied in this paper and corresponding suggestions are given.     

Fuzzy Optimum Model of Semi-Structural Decision for Lectotype Optimization of Offshore Platforms

In the process of concept design of offshore platforms, it is necessary to select the best from feasible alternatives through comparison and filter. The criterion set, used to evaluate and select the satisfying alternative, consists of many qualitative and quantitative factors. Therefore, the selection is a problem of multicriteria and semi- structural decision- making. Different from traditional methods in semi- structural decision- making, a new framework and methodology is presented in this paper for evaluation of offshore platform alternatives. First, the criterion set is established for the evaluation of alternatives. Next, the approach is studied to construct the relative membership degree matrix, in which both qualitative and quantitative factors are consistent with the uniform calculating standard. And then a new weight-assessing method is developed for calculation of the weights based on the relative membership degree matrix. Finally, a multi-hierarchy fuzzy optimum model is adopted to select t     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.