A hybrid discrete–finite element model for numerical simulation of geomaterials

A hybrid discrete–finite element model is introduced for simulation of mechanical behavior of geomaterials. The soil or rock is modeled as a system of discrete balls that interact through normal and shear springs. The balls can be bonded at the contact points to withstand the applied deviatoric stresses. The important feature of this model is that the confining walls that can be imagined for example as the surrounding membrane or the mold in a physical test are modeled by deformable finite elements. This allows simulation of laboratory test features more realistically compared to the situations where the surrounding walls are rigid. The relationships between micro- and macro-properties are investigated in this paper as well. These relationships and the corresponding curves are helpful tools in calibration of the numerical model for the macroscopic elastic properties.     

巴丹吉林沙漠北缘拐子湖流沙下垫面近地层湍流强度和陆面过程特征

利用巴丹吉林沙漠北缘拐子湖流沙下垫面2013年7、10月和2014年1、4月的湍流通量资料,计算并分析了研究区近地层湍流强度,同时针对风速分量、温度、水汽和CO₂归一化标准差随稳定度的变化关系和总体输送系数等陆面过程特征进行分析。结果表明：（1）风速各分量的湍流强度均随风速的增加逐渐减小,风速处于2 m·s^-1以下时湍流发展最为旺盛。湍流强度主要由水平方向风速分量决定,垂直方向风速的作用较小,且近中性和不稳定层结利于湍流的发展。与其他地区相比,平坦且没有建筑物的沙漠地区,机械湍流较弱,湍流强度相应较小。（2）风速各分量的归一化标准差与稳定度（z/L）均满足1/3次方函数规律,其中垂直方向风速分量的拟合曲线方程较好。（3）动量输送系数C_d具有明显的夏季高、冬季低的变化状态且各月的日变化形态均呈夜间低、日间高的循环形态。热量输送系数C_h的不同月份日变化间并没有明显的排列次序,且日出日落前后具有明显的波动。不稳定层结时,C_d和C_h均随风速的增加逐渐减小;稳定层结时,C_d和C_h均随着风速的增加逐渐上升。     

Role of market agents in mitigating the climate change effects on food economy

Natural Hazards - Agriculture’s ability to adapt to the impacts of climate change is critical for agricultural households as well as the general public and policymakers. Economic agents can...     

Structural control of El Sela granites and associated uranium deposits, Southern Eastern Desert, Egypt

The El Sela area is a part of the basement complex of the Eastern Desert of Egypt and the Pan-African Shield. The area comprises outcrops of dismembered ophiolites thrust over arc volcano-sedimentary sequence and intruded by different syn- to post-tectonic granitoids. Structural analysis of the area enabled the separation and definition of four structural episodes: (E1) folding–thrusting episode associated with the cratonization of the arc/inter-arc rock association and the intrusion of the syntectonic (Older) granites. (E2) Upright folding episode associated with the compression and shortening to the ENE–WSW direction which is different from the NNW–SSE shortening direction during E1; at the end of E2, late tectonic granites were intruded. (E3) Post-tectonic granitic intrusion episode: two mica granite and granitic dikes were intruded during this episode. (E4) Fracturing, faulting, and post-granitic dike extrusion episodes caused different faults that took place after cratonization until the present. There are three generations of folds during ductile deformation (E1 and E2). The F2 folds are nearly coaxial (along ENE–WSW trend) with the F1 folds. The F3 folding is displayed by folds generally trending NNW–SSE. Therefore, the ENE–WSW and NNW–SSE trends can considered as preexisting discontinuities and mechanical anisotropy of the crust in the following structure episodes. Brittle deformation (E3 and E4) reveals the importance of those trends which control the multi-injections and many alteration features in the study area. During reactivation, a simple shear parallel to the inherited ductile fabrics was responsible for the development of mineralized structures along the ENE–WSW and NNW–SSE trends. So they can be considered as paleochannel trends for deep-seated structures and can act as a good trap for uranium and/or other mineral resources. Most of the uranium anomalies are delineated along ENE–WSW and NNW–SSE shear zones where quartz-bearing veins bounded the lamprophyre dike and microgranites and dissected them in relation to the successive fracturation and brecciation corresponding to the repeated rejuvenation of the structures. Therefore, the structural controls of the uranium mineralizations in the El Sela area appear to be related to the interaction between inherited ductile fabrics and overprinting brittle structures.     

Artificial Neural Network (ANN) Based Inversion of Benthic Substrate Bottom Type and Bathymetry in Optically Shallow Waters - Initial Model Results

Ocean-colour remote sensing in optically shallow waters is influenced by contribution from the water column depth as well as by the substrate type. Therefore, it is required to include the contribution from the water column and substrate bottom type for bathymetry estimation. In this report we demonstrate the use of Artificial Neural Network (ANN) based approach to spectrally distinguish various benthic bottom types and estimate depth of substrate bottom simultaneously in optically shallow waters. We have used in-water radiative transfer simulation modeling to generate simulated top-of-the-water column reflectance the four major benthic bottom types viz. sea grass, coral sand, green algae and red algae using Hydrolight simulation model. The simulated remote sensing reflectance, for the four benthic bottom types having benthic bottom depth up to 30 m were generated for moderately clear waters. A multi-layer perceptron (MLP) type neural network was trained using the simulated data. ANN based approach was used for classification of the benthic bottom type and simultaneous inversion of bathymetry. Simulated data was inverted to yield benthic bottom type classification with an accuracy of ~98% for the four benthic substrate types and the substrate depth were estimated with an error of 0% for sea grass, 1% for coral sand and 1–3% for green and red algae up to 25 m, whereas for substrate bottom deeper than 25 m depth the classification errors increased by 2–5% for three substrate bottom types except sea grass bottom type. The initial results are promising which needs validation using the in-situ measured remote sensing reflectance spectra for implementing further on satellite data.     

Measured performance of the application of EGNOS in the road traffic sector

European Geostationary Navigation Overlay Service (EGNOS) is a satellite-based system developed to improve the performance of GPS in the European region. It not only enhances the estimated positioning accuracy but also provides an integrity solution. We assess the EGNOS performance through analysis of real measurements, performed in different road user environments. We investigate the use of the integrity concept in future Global Navigation Satellite System (GNSS)-based applications in the road environment, considering both suburban and dense urban areas. The analysis is motivated by the fact that there is an increasing number of road applications, such as billing system, transportation of dangerous goods, remote tracking of trucks and snow plows, fleet management and “pay as you go” car insurances, where the system liability has to be guaranteed. The scope of the analysis is to investigate to which extent the use of the integrity concept can be used for such purpose; the assessment is based on real measurement campaigns in representative environments, providing statistical results in terms of accuracy and integrity, and in a wider sense of the feasibility of the use of EGNOS for augmenting the reliability of GNSS positioning for road applications.     

Coherent integration time limit of a mobile receiver for indoor GNSS applications

There is an emerging requirement for processing global navigation satellite system (GNSS) signals indoor where the signal is very weak and subjected to spatial fading. Typically, longer coherent integration intervals provide the additional processing gain required for the detection and processing of such weak signals. However, the arbitrary physical motion of the handset imputed by the user limits the effectiveness of longer coherent integration intervals due to the spatial decorrelation of the multipath-faded GNSS signal. In this paper, limits of coherent integration due to spatial decorrelation are derived and corroborated with experimental verification. A general result is that the processing gain resulting from direct coherent integration saturates after the antenna has moved through a certain distance, which for typical indoor propagation, is about half a carrier wavelength. However, a refined Doppler search coupled with a prolonged coherent integration interval extends this limit, which is effectively a manifestation of selective diversity.