Spatial and temporal variations of heavy metal contamination in sediments of a mangrove swamp in Hong Kong

Spatial and temporal variations of heavy metal contamination in sediments of a small mangrove stand in Hong Kong were examined by laying two transects perpendicular across the shore. Surface sediment samples were taken along the two transects running landward to seaward at intervals of 5 or 10 m during December 1989, and March, July and September 1990. Total concentrations of Cu, Zn, Mn and Pb did not show any specific trend along each transect, although the maximum concentration of heavy metals tended to occur at the landward edge. There was a high level of variability among locations within each transect; for instance, the Cu concentrations fluctuated from 1 to 42 μg g⁻¹. Certain sites contained exceptionally high levels of total metals. Total concentrations of Cu, Zn, Mn and Pb as high as 42, 150, 640 and 650 μg g⁻¹, respectively, were recorded, implying contaminated sediment. A comparison of the two transects indicated that the sediments of Transect B seemed to contain higher total Zn but lower Cu and Mn concentrations than those of Transect A. Most of the heavy metals accumulated in the sediments were not extractable with ammonium acetate and no Cu or Pb was detected in these extracts. The concentrations of extractable Zn and Mn were low, less than 10% of the total metal concentration in the sediment, and appeared to decrease from the landward to seaward samples. For both total and extractable metals, there were significant seasonal fluctuations for both transects, but no specific trends could be identified. These spatial and temporal variations suggest that the scale and representativeness of sampling require careful planning, and a single sample might not give a satisfactory evaluation of the levels of heavy metal contamination in mangrove ecosystems.     

A review of methods of parameter estimation for the extreme value type-1 distribution

Four important methods of estimating the parameters of the extreme value type-1 (Gumbel) distribution, namely: (1) moments (MMM); (2) maximum likelihood (MML); (3) maximum entropy (MME); and (4) probability weighted moments (PWM), are considered, suitable solution procedures are recommended and related problems discussed. Approximate formulae for computing the variances-covariances of the estimators by each method are given in terms of the population value of the scale parameter, and these are shown to indicate very well the performance of the related method.

A simulation study to evaluate the performance of these methods in terms of commonly used criteria, i.e. the bias, root mean square error and goodness-of-fit statistic is described. It was found that the MMM is not as good as the remaining three methods, of which the PWM is best in terms of the bias, and the MML is best in terms of the root mean square error and efficiency. The MME, by all the criteria, ranks second best and follows the MML more closely than the PWM.     

DEM-based morphometry of large-scale sand dune patterns in the Grand Erg Oriental (Northern Sahara Desert,Africa)

Formerly, sand dune patterns were investigated mostly by aerial and satellite images, but more recently, geomorphometric analysis based on digital elevation models (DEMs) has become an important approach. In this paper, sand dune patterns of the Grand Erg Oriental (Sahara) are studied using the De Ferranti (2014) DEM, which is a blending of SRTM (Shuttle Radar Topography Mission), ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) and other elevation datasets. In the Grand Erg Oriental, there are four large-scale dune pattern types with gradual transitions between them and with several subtypes, namely P1, consisting of large, branching linear dunes; P2, a complex pattern including small-size and widely spaced star and dome dunes; P3, a network type created mostly from crescentic dunes; and finally, P4, consisting of large and closely spaced star dunes. The largest dunes with 90–100-m mean height can be found in the southern parts of the Grand Erg Oriental, where P1 and P4 patterns dominate, and these areas are also characterised by the most intensive sand accumulation with 25–30-m equivalent sand thickness. In the present study, we use regression analysis to investigate the functional relationships between sand dune characteristics. Further on, we have elaborated a DEM-based method to delineate dunes and calculate sand volumes and dune orientations. Comparing wind rose data and sand dune axis rose diagrams, it is concluded that in some parts of the Grand Erg Oriental, the present dune types and patterns are in agreement with the actual wind regime, but in other cases, the present dune patterns are at least partially the results of former wind regimes.     

Prediction of Unconfined Compressive Strength and Flexural Strength of Cement-Stabilized Sandy Soils: A Case Study in Vietnam

Geotechnical and Geological Engineering - Stabilization of sand by the deep mixing method increases its unconfined compressive strength (UCS) so that it can be used as a foundation for...     

Canopy Structure Attributes Extraction from LiDAR Data Based on Tree Morphology and Crown Height Proportion

Urban green space is important for the well-being of urban residents. Seeking for three spatial dimension stereopsis is a very important issue in investigating urban green space. A potential applicability in the domain of urban tree space measurement and modelling has been explored based on LiDAR data in our study. This paper aims to present a framework—through a more automatic way—to extract canopy structure attributes. In this study, treetops were filtered by local maxima filtering algorithm from canopy height model. An improved spoke wheel algorithm was used to delineate the crown boundaries. And, an estimation issue of crown volume was simplified into three measurable parameters by estimating the crown structures. For accuracy assessment, data of 363 sampled trees located in the subset of Székesfehérvár city were selected randomly. The overall detection rate of treetop had proven to be 95.87% and crown boundaries were recognized effectively with a delineation quality of 88.59%, which were acceptable. About 80.26% of investigated crown volume estimates were obtained with shape distortion ranging from 3.1 to 7.8% according to the error analysis. The results indicated that the method can be used to extract canopy structure in urban areas.     

The Footprint Database and Web Services of the Herschel Space Observatory

Data from the Herschel Space Observatory is freely available to the public but no uniformly processed catalogue of the observations has been published so far. To date, the Herschel Science Archive does not contain the exact sky coverage (footprint) of individual observations and supports search for measurements based on bounding circles only. Drawing on previous experience in implementing footprint databases, we built the Herschel Footprint Database and Web Services for the Herschel Space Observatory to provide efficient search capabilities for typical astronomical queries. The database was designed with the following main goals in mind: (a) provide a unified data model for meta-data of all instruments and observational modes, (b) quickly find observations covering a selected object and its neighbourhood, (c) quickly find every observation in a larger area of the sky, (d) allow for finding solar system objects crossing observation fields. As a first step, we developed a unified data model of observations of all three Herschel instruments for all pointing and instrument modes. Then, using telescope pointing information and observational meta-data, we compiled a database of footprints. As opposed to methods using pixellation of the sphere, we represent sky coverage in an exact geometric form allowing for precise area calculations. For easier handling of Herschel observation footprints with rather complex shapes, two algorithms were implemented to reduce the outline. Furthermore, a new visualisation tool to plot footprints with various spherical projections was developed. Indexing of the footprints using Hierarchical Triangular Mesh makes it possible to quickly find observations based on sky coverage, time and meta-data. The database is accessible via a web site http://herschel.vo.elte.hu and also as a set of REST web service functions, which makes it readily usable from programming environments such as Python or IDL. The web service allows downloading footprint data in various formats including Virtual Observatory standards.     

Ciliate communities in a constructed mangrove wetland for wastewater treatment

In wetlands constructed for treating municipal and industrial wastewater, including mangroves, the effect of wastewater discharged on the substrate has often been neglected. Ciliates, an important group of protozoa, are sensitive to pollutants and any changes in ciliate diversity and community structure reflects the habitat quality. The ciliate communities at six sections along a constructed mangrove belt (33 m in length) planted with Aegicerascorniculatum were investigated in Shenzhen, South China. In all samples collected in both rainy and dry seasons, 183 ciliate species were observed. Most species (56%) were free-swimming forms, while only 10.8% were sessile ciliates. The abundance and species number of ciliates were both found to decrease from the anterior (the wastewater inlet) to the posterior (the outlet) parts of the wetland belt, indicating that organic matter and bacteria in wastewater, which served as food for most ciliates, were gradually removed by the constructed wetland. The r/K (number of r- and K-selected species) ratios at the six sections were relatively small, between 0.2 and 0.4, whereas the C/P (abundance of colpodids and polyhymenophorans) quotient at some sections was higher than 1. These results indicate that although most of the environments along the constructed wetland belt were not stressful for ciliate communities, there were habitats that favored colpodids in high abundances.     

Use of ciliates (Protozoa: Ciliophora) as bioindicator to assess sediment quality of two constructed mangrove sewage treatment belts in Southern China

To complement physical and chemical data, information of biological communities is important to assess the qualities of mangrove sediments receiving wastewater. Ciliate communities have cosmopolitan distribution, short life cycle and high sensitivity to pollutants, which make them useful as biological indicators of the sediment environment. In most literature, ciliates are widely used as bioindicators for the state of water quality. In this study, the physico-chemical parameters and ciliate community structure of surface sediment collected at different sampling points from two constructed mangrove (Aegiceras and Sonneratia) belts for treatment of municipal sewage in southern China were investigated. Results showed that most (> 80%) of the 216 species ciliates identified at the two constructed mangrove belts were either omnivorous or bacterivorous. Sediment redox potential (Eh) was considered an important factor to govern the distribution of ciliate species within the mangrove sediment. The saprobic system originally derived from freshwater ecosystem was used to evaluate the saprobic degrees of these constructed mangrove belts. Saprobic index (SI) values declined from the sewage inlet to the outlet points of the constructed belts, suggesting better sediment quality at the outlet point caused by treatment processes within the mangrove belt system. Sediment quality of the sewage outlet area of the constructed Aegiceras belt was determined as class II-III (SI = 2.48), while that of the Sonneratia belt was as class III (SI = 2.71) according to the saprobic classification, indicating that a better sewage treatment efficiency was apparent in the Aegiceras than Sonneratia belt. The present data suggested that ciliates could serve as a good bioindicator in assessing organically polluted sediment qualities.     

Effects of salinity on treatment of municipal wastewater by constructed mangrove wetland microcosms

The effects of salinity on the removal of dissolved organic carbon and nutrients from municipal wastewater by constructed mangrove microcosms planted with Aegiceras corniculatum were investigated. During the four-month wastewater treatment, the treatment efficiency was reduced by high salinity, and the removal percentages of dissolved organic carbon, ammonia-N and inorganic N dropped from 91% to 71%, from 98% to 83% and from 78% to 56%, respectively, with salinity increasing from 0 to 30 parts per thousands (ppt). In spite of such inhibition at high salinity, 100% of the effluents discharge from the constructed mangrove microcosms still complied with the discharge standards set by the Hong Kong Government for Coastal Water Control Zones. These results suggested that constructed mangrove wetland treatment systems were promising to effectively treat municipal wastewater, even those with high salinity. In addition, the denitrification potential in soil was found to be retarded by the high salinity while mangrove plants grew best at 15 ppt salinity condition.     

Experimental assessment of contact forces on a rigid base following footing uplift

A number of investigations in the recent decades have shown that footing uplift can reduce the seismic loading on a structure. Guidelines to design a structure with seismic uplift capability have been proposed. However, these studies mainly focus on the structural response and neglect the impact forces on the footing from re‐contact between the footing and the supporting medium. A small number of computational studies of the induced forces on the footing have been performed. This paper presents the results of free vibrations and shake table tests on a single degree‐of‐freedom model of a bridge pier with footing uplift on a rigid base. Two support conditions are considered, that is, footing fixed to the base and footing free to uplift on a rigid base. Load cells were placed at the interface of the footing and rigid base to measure the contact forces during structural vibration. The footing responses of both flexible and rigid structures due to free vibration are compared. The results show that the flexibility of the structure has significant effects on footing uplift duration and amplitude and reduces the contact force, in some cases very significantly. The flexible structure was also subjected to harmonic base excitations. It is found that varying the characteristics of the excitation changes the uplift amplitude but does not affect the contact force significantly. Copyright © 2017 John Wiley & Sons, Ltd.