A study of the spatial structure of the atmospheric boundary layer with a Doppler-Sodar network

The studies conducted in 1991–2004 by scientists of the A.M. Obukhov Institute of Atmospheric Physics, Russian Academy of Sciences, and the Karpov Institute of Physical Chemistry yielded data on the structures of the surface air layer (to a height of 20 m) and both subinversion and inversion layers (to heights of from 800 m to 1 km), where arid aerosol is transported. One of the main objectives of the 2007 experiment was to record the space-vortex structures within a layer of 30–700 m that directly provide the removal and long-range transport of fine-dispersed (<5 µm) desert aerosol. This paper describes the organization of the Khar-Gzyr 2007 experiment (Black Lands, 2007) to study the convective removal of arid aerosol from desertificated lands, and it presents some data obtained from the remote sensing of the atmospheric boundary layer with a sodar network in the course of this experiment. The sodar network, which was developed to study a spatial structure of coherent vortices, included three identical minisodars (with carrier frequencies of 3.8 kHz) located at the apices of a triangle, each side of which was about 3.5 km, and a sodar (with a carrier frequency of 1.7 kHz). The vertical profiles of the three wind-velocity components and the characteristics of air temperature fluctuations were determined. The procedure of identifying coherent vortex structures is described. The variations in the vertical and horizontal wind-velocity components and the scales characteristic of such structures are estimated.     

Stochastic evaluation of fluvial to marginal marine sealing facies

Hydrocarbon top seal analyses are particularly difficult in fluvial and marginal marine settings. Although these settings often contain beds comprised of a low-permeability, clay-rich lithology associated with high quality seals, their presence does not guarantee an effective seal because individual beds within the stratal unit may be laterally discontinuous. Lateral facies changes, truncation of fine-grained beds, or the presence of crevasse splays may provide cross-stratal migration pathways, reducing the effective sealing capacity to a magnitude less than the closure height.     

A control-volume finite-element method for three-dimensional multiphase basin modeling

In this paper we describe a 3D control-volume finite-element method to solve numerically the coupled partial differential equations (PDEs) governing geological processes involved in the evolution of sedimentary basins. These processes include sediment deposition and deformation, hydrocarbon generation, multiphase fluid flow, and heat transfer in deforming porous media.     

The thermal structure of the Dvurechenskii mud volcano and its implications for gas hydrate stability and eruption dynamics

The sediment temperature distribution at mud volcanoes provides insights into their activity and into the occurrence of gas hydrates. If ambient pressure and temperature conditions are close to the limits of the gas hydrate stability field, the sediment temperature distribution not only limits the occurrence of gas hydrates, but is itself influenced by heat production and consumption related to the formation and dissociation of gas hydrates. Located in the Sorokin Trough in the northern Black Sea, the Dvurechenskii mud volcano (DMV) was in the focus of detailed investigations during the M72/2 and M73/3a cruises of the German R/V Meteor and the ROV Quest 4000 m in February and March 2007. A large number of in-situ sediment temperature measurements were conducted from the ROV and with a sensor-equipped gravity corer. Gas hydrates were sampled in pressurized cores using a dynamic autoclave piston corer (DAPC). The thermal structure of the DMV suggests a regime of fluid flow at rates decreasing from the summit towards the edges of the mud volcano, accompanied by intermittent mud expulsion at the summit. Modeled gas hydrate dissociation temperatures reveal that the gas hydrates at the DMV are very close to the stability limits. Changes in heat flow due to variable seepage rates probably do not result in changes in sediment temperature but are compensated by gas hydrate dissociation and formation.     

Tectonically-driven mud volcanism since the late Pliocene on the Calabrian accretionary prism,central Mediterranean Sea

Mud volcanoes recently discovered on the offshore Calabrian Arc are investigated at two sites 60 km apart, in water depths of 1650--2300 m, using swath bathymetry, 2D&3D multichannel seismic and cores. The seabed and subsurface data provide information on their formation and functioning in relation to tectonic activity during the rapid Plio-Quaternary advance of the accretionary prism. Fore-arc extension and thrust-belt compression are seen to have involved two main phases of activity, separated by a regional unconformity recording a mid-Pliocene (3.5–3.0 Ma) tectonic reorganization. The two sites of mud volcanism lie in contrasting tectonic settings (inner fore-arc basin vs central fold-and-thrust belt) and record differing forms of seabed extrusive activity (twin mud cones and a caldera vs a broad mud pie). At both sites, subsurface data show that mud volcanism took place throughout the second tectonic phase, since the late Pliocene; differing forms of mud extrusion were accompanied by subsidence to form depressions beneath and within extrusive edifices up to 1.5 km thick. The basal subsidence depressions point to sources within the succession of thrusts underlying the inner to central Arc, consistent with microfossils within cored mud breccias from both sites that are derived from strata as old as Late Cretaceous.     

Impact of dynamic feedbacks between sedimentation,sea-level rise,and biomass production on near-surface marsh stratigraphy and carbon accumulation

Salt marshes accrete both organic and inorganic sediments. Here we present analytical and numerical models of salt marsh sedimentation that, in addition to capturing inorganic processes, explicitly account for above- and belowground organic processes including root growth and decay of organic carbon. The analytical model is used to examine the bias introduced by organic processes into proxy records of sedimentation, namely ¹³⁷Cs and ²¹⁰Pb. We find that accretion rates estimated using ²¹⁰Pb will be less than accretion rates estimated using the ¹³⁷Cs peak in steadily accreting marshes if (1) carbon decay is significant and (2) data for ²¹⁰Pb extend below the ¹³⁷Cs peak. The numerical model expands upon the analytical model by including belowground processes such as compaction and root growth, and by explicitly tracking the evolution of aboveground biomass and its effect on sedimentation rates. Using the numerical model we explore how marsh stratigraphy responds to sediment supply and the rate of sea-level rise. It is calibrated and tested using an extensive data set of both marsh stratigraphy and measurements of vegetation dynamics in a Spartina alterniflora marsh in South Carolina, USA. We find that carbon accumulation in marshes is nonlinearly related to both the supply of inorganic sediment and the rate of sea-level rise; carbon accumulation increases with sea-level rise until sea-level rise reaches a critical rate that drowns the marsh vegetation and halts carbon accumulation. The model predicts that changes in carbon storage resulting from changing sediment supply or sea-level rise are strongly dependent on the background sediment supply: if inorganic sediment supply is reduced in an already sediment poor marsh the storage of organic carbon will increase to a far greater extent than in a sediment-rich marsh, provided that the rate of sea-level rise does not exceed a threshold. These results imply that altering sediment supply to estuaries (e.g., by damming upstream rivers or altering littoral sediment transport) could lead to significant changes in the carbon budgets of coastal salt marshes.     

The tidal flushing of multiple-loop animal burrows

Tidal flushing of animal burrows in mangrove swamps provides an effective and important mechanism for transport of salt and other soluble substances. The burrows have complex morphologies consisting of multiple loops. Using established computational modelling techniques, burrow geometries were simulated from characteristic burrow dimensions and the effect of multiple loops on flushing is studied. The computational models show that flushing is enhanced in multiple-loop burrows as upper loops can be completely evacuated, increasing the volume of burrow water removed. The models indicate that there may be a depth limit to which flushing occurs in complex burrow structures. Periscope loops extend further than one characteristic loop depth and are shown to affect the flushing of burrows if the surface-water plume penetrates to their lower depth. Periscope loops with surface openings on the downstream side of the burrow, relative to the tidal inundation, most frequently experience this condition and thus have a great impact on burrow flushing. Field measurements of salinity agree with the hypothesis that there is a depth limit of flushing for complex burrows that is independent of burrow salinity, and suggest a value of 30–35 cm. The measurements also support the suggestion that significant flushing of burrows occurs within a single tidal event. An experiment considered the movement of animals across the interface created by low-salinity surface water and high-salinity burrow water after a partial flushing event. The motion enhances the effective diffusion coefficient of salt by a factor of at least 10², as compared with free diffusion of salt in water, resulting in a more even distribution of dissolved salt in the burrow water between tidal inundations. This distribution may lead to an increase in the depth to which flushing occurs during subsequent inundations.     

Evaluation of policy options for the live reef food fish trade in the province of Palawan,Western Philippines

The live reef food fish (LRFF) trade has an estimated annual retail value of US$1 billion in the Asia-Pacific region and at least US$30 million in the Philippines. Palawan Province is the trade's center accounting for as much as 55% of the commodity's total export. Concern about the LRFF trade has caused the Palawan Provincial government to take action to regulate the trade. Four key policy options to address the short-term policy objective of developing a sustainable LRFF industry through the reduction of threats associated with destructive fishing and overfishing were proposed. These four policy options and associated analyses were presented to stakeholders at three separate policy consultations. The stakeholders reached a consensus that a regulated LRFF trade was the most sensible option. As a result, the Provincial Government of Palawan took action to enact “The Palawan Live Reef Fish Ordinance of 2006”, which provides for the sustainable and integrated regulation of the LRFF industry. This provincial ordinance will assist in crafting a national policy for the LRFF trade and may also be useful in revising the 1998 Philippine Fisheries Code. The key challenge is how to translate the ordinance provisions into effective on-the-ground actions.     

The effect of a topographic high on the morphological stability of a two-inlet bay system

The cross-sectional stability of two tidal inlets connecting the same back-barrier lagoon to the ocean is investigated. The condition for equilibrium is the cross-sectional area tidal prism relationship. In an earlier study [Van de Kreeke, J., 1990. Can multiple inlets be stable? Estuarine, Coastal and Shelf Science 30: 261–273.], using the same equilibrium condition, it was concluded that where two inlets connect the same basin to the ocean ultimately one inlet will close. One of the major assumptions in that study was that the water level in the basin fluctuated uniformly. In hindsight this assumption might be too restrictive. For example, in the Wadden Sea the back barrier lagoon consists of a series of basins, rather than one single basin, separated by topographic highs. These topographic highs limit but do not exclude the exchange of water between the sub-basins. For this reason in the present study, a topographic high in the form of a weir was added, separating the back-barrier lagoon in two sub-basins. The water level in the sub-basins, rather than in the back-barrier as a whole, is assumed to fluctuate uniformly. For this schematization the hydrodynamic equations are solved using a finite difference method. The results, together with the equilibrium condition, yield the equilibrium flow curve for each of the inlets. The intersections of the two equilibrium flow curves represent combinations of cross-sectional areas for which both inlets are in equilibrium. The stability of the equilibriums was investigated using a non-linear stability analysis resulting in a flow diagram. Calculations were carried out for different inlet and weir characteristics. Sinussoidal tides were the same for both inlets. The results show that for relatively large wetted cross-sectional areas over the topographic high, approaching the situation of a single basin, there are no combinations of inlet cross-sectional areas for which both inlets are in a stable equilibrium. This supports the conclusion in the earlier study. For relatively small wetted cross-sectional areas over the topographic high there is one set of stable equilibriums. In that case the two-inlet bay system approaches that of two single-inlet bay systems.