The Taurewa Eruptive Episode: evidence for climactic eruptions at Ruapehu volcano, New Zealand

 The ca. 10,500 years B.P. eruptions at Ruapehu volcano deposited 0.2–0.3 km³ of tephra on the flanks of Ruapehu and the surrounding ring plain and generated the only known pyroclastic flows from this volcano in the late Quaternary. Evidence of the eruptions is recorded in the stratigraphy of the volcanic ring plain and cone, where pyroclastic flow deposits and several lithologically similar tephra deposits are identified. These deposits are grouped into the newly defined Taurewa Formation and two members, Okupata Member (tephra-fall deposits) and Pourahu Member (pyroclastic flow deposits). These eruptions identify a brief (<ca. 2000-year) but explosive period of volcanism at Ruapehu, which we define as the Taurewa Eruptive Episode. This Episode represents the largest event within Ruapehu's ca. 22,500-year eruptive history and also marks its culmination in activity ca. 10,000 years B.P. Following this episode, Ruapehu volcano entered a ca. 8000-year period of relative quiescence. We propose that the episode began with the eruption of small-volume pyroclastic flows triggered by a magma-mingling event. Flows from this event travelled down valleys east and west of Ruapehu onto the upper volcanic ring plain, where their distal remnants are preserved. The genesis of these deposits is inferred from the remanent magnetisation of pumice and lithic clasts. We envisage contemporaneous eruption and emplacement of distal pumice-rich tephras and proximal welded tuff deposits. The potential for generation of pyroclastic flows during plinian eruptions at Ruapehu has not been previously considered in hazard assessments at this volcano. Recognition of these events in the volcanological record is thus an important new factor in future risk assessments and mitigation of volcanic risk at Tongariro Volcanic Centre. Received: 5 July 1998 / Accepted: 12 March 1999     

Changes in Seagrass-associated fish and crustacean communities on Florida Bay mud banks: The effects of recent ecosystem changes?

The fauna of seagrass-covered mud banks in Florida Bay, documented in the mid 1980s prior to recent seagrass die-off, phytoplankton blooms, and other ecosystem changes, was reexamined in the mid 1990s for faunal changes that might be associated with environmental perturbations. During both decades, decapod crustaceans and fishes were collected with 1-m² throw traps from seagrass beds at six sites that differ in the amount of freshwater and/or marine influence and in seagrass community metrics. The most common faunal changes were declines in seagrass-canopydwelling forms and increases in benthic forms. At three sites with relatively lush seagrass meadows, above-ground seagrass standing crop declined and abundance of the benthic predatory fishOpsanus beta increased. The degree of faunal change among these sites appeared to be related either to salinity variability or to the degree of exposure to the ecosystem changes that have taken place in Florida Bay. At two sites with poorly developed seagrass meadows, seagrass standing crop and canopy height did not change significantly between decades, but there was an increase in shoot density and total leaf area. The animal communities at these sites were characterized by significant increases in the abundance of benthic crustaceans. At the site on the edge of Rankin Lake, the basin where seagrass die-off was first observed in Florida Bay during 1987, seagrass standing crop, canopy height, shoot density, and leaf area declined significantly between decades, but species richness of both crustaceans and fishes increased. The abundance of canopy-dwelling crustaceans and fishes declined markedly at this site, whereas the abundance of benthic forms less dependent on seagrass cover generally increased. In retrospect, we believe the fauma at this site during the 1980s, characterized by high productivity but few species, was already showing signs of the stresses that led to the seagrass die-off that began in 1987.     

Regional effects of climate change on reindeer: a case study of the Muotkatunturi region in Finnish Lapland

Few studies have investigated current climate changes for high latitude regions, and the impact of such changes on reindeer and indigenous people. Previous work by other authors has identified snow and ice conditions in winter as being critical in determining the availability of forage for reindeer. Deep snow makes it difficult to access food. Lack of food weakens the herd and can reduce the allocation of nutrients to the development of the foetus in the female deer. Climate data for Lapland, northern Finland, and Karasjok, northern Norway, are examined, together with reindeer calf numbers for the period 1977 to 1994 for the Muotkatunturi region (68°N 25°30'E). Between 1883 and 1993, precipitation increased but temperatures showed no clear warming or cooling trend. However, since the late 1980s, temperatures have increased. A regression analysis on the climate and reindeer data found that the warmer the winter prior to the rut, the fewer the live calves recorded the following year (r = 0.529, p < 0.05). Also, the wetter the winter prior to the rut, the fewer the calves recorded (r = 0.427, p < 0.10). In contrast, the warmer the autumn prior to their birth, the greater the number of calves recorded (r = 0.474, p < 0.10). These results suggest that as climate changes and winters become warmer and wetter with increased snowfall, calf numbers will decline. These findings have important implications for the Saami people who are heavily dependent on the reindeer for their livelihood.     

A modified light transmission visualization method for DNAPL saturation measurements in 2-D models

In this research, a light transmission visualization (LTV) method was used to quantify dense non-aqueous phase liquids (DNAPL) saturation in two-dimensional (2-D), two fluid phase systems. The method is an expansion of earlier LTV methods and takes into account both absorption and refraction light theories. Based on this method, DNAPL and water saturations can rapidly be obtained point wise across sand-packed 2-D flow chambers without the need to develop a calibration curve. A single point calibration step is, however, needed when dyed DNAPL is used to account for the change in the transmission factor at the dyed DNAPL–water interface. The method was applied to measure, for the first time, undyed DNAPL saturation in small 2-D chambers. Known amounts of DNAPL, modeled by tetrachloroethylene (PCE), were added to the chamber and these amounts were compared to results obtained by this LTV method. Strong correlation existed between results obtained based on this method and the known PCE amounts with an R² value of 0.993. Similar experiments conducted using dyed PCE showed a stronger correlation between results obtained by this LTV method and the known amounts of dyed PCE added to the chamber with an R² value of 0.999. The method was also used to measure dyed PCE saturation in a large 2-D model following sparging experiments. Results obtained from image analyses following each sparging event were compared to results obtained by two independent techniques, namely gas chromatography–mass spectrometry (GC/MS) analyses and carbon column extraction. There was a good agreement between the results obtained by this LTV method and those obtained by the two independent techniques when experiments were carried out under stable light source conditions and errors in mass balance were minor. The method presented here can be expanded to measure fluid contents in three fluid phase systems and provide a non-destructive, non-intrusive tool to investigate changes in DNAPL architecture and flow characteristics in laboratory experiments.     

Debris-flow release processes investigated through the analysis of multi-temporal LiDAR datasets in north-western Iceland

Debris flows are fast-moving gravity flows of poorly sorted rock and soil, mixed and saturated with water. Debris-flow initiation has been studied using empirical and experimental modelling, but the geomorphic changes, indicative of different triggering processes, are difficult to constrain with field observations only. We identify signatures to distinguish two different debris-flow release styles by integrating high-resolution multi-temporal remote sensing datasets and morphometric analysis. We analyse debris flows sourced above the town of Ísafjörður (Iceland). Two debris-flow triggering processes were previously hypothesised for this site: (i) slope failure, characterised by landslides evolving into debris flows; and (ii) the fire-hose effect, in which debris accumulated in pre-existing, steep-sided bedrock passages is transported by a surge of water. It is unknown which process dominates and determines the local risk. To investigate this question, we compare airborne LiDAR elevation models and aerial photographs collected in 2007 with similar data from 2013. We find that two new debris-flow tracks were created by slope failures. These are characterised by steep sliding surfaces and lateral leveed channels. Slope failure also occurred in two large, recently active tracks, creating the preparatory conditions for the fire-hose effect to mobilise existing debris. These tracks show alternating zones of fill and scour along their length, and debris stored below the source-area at rest angles >35°. Our approach allows us to identify and quantify the morphological changes produced by slope failure release process, which generated the preparatory conditions for the fire-hose effect. As debris flows are rarely observed in action and morphological changes induced by them are difficult to detect and monitor, the same approach could be applied to other landscapes to understand debris-flow initiation in the absence of other monitoring information, and can improve the identification of zones at risk in inhabited areas near hillslopes with potential for debris flows. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Biomarkers and environmental risk assessment: guiding principles from the human health field

Although the potential use of biomarkers within environmental risk assessment (ERA) has long been recognised their routine use is less advanced compared with clinical human health risk assessment, where a number of familiar biomarkers (such as blood pressure and serum cholesterol) are in common usage. We have examined how biomarkers are incorporated into human health risk assessment and have identified several 'required elements'. These include identification of the (clinical) assessment endpoint at the outset, rational selection of the biomarker(s) (the measurement endpoint), biomarker 'validation' (e.g. QA/QC) and biomarker 'qualification' (evidence linking the measurement and assessment endpoints). We discuss these elements in detail and propose that their adoption will facilitate the routine use of biomarkers in environmental risk assessment. Furthermore, our analysis highlights the need for cooperation between those working with biomarkers within human and environmental risk assessment to exchange best practice between common disciplines for mutual advantage.     

'Our shared responsibility': participation in ecological projects as a means of empowering communities to contribute to coastal management processes

The objective of this project was to empower people of Blyth Valley in Northumberland (northeast England) to contribute to the management of their coastal heritage. A group of volunteers, the Links Conservation Group, working in collaboration with the environmental managers (Blyth Valley Borough Council), scientists, local specialists and other volunteers, surveyed the biodiversity, social, cultural and industrial history and profiles of the dunes, as well as their perceived value to local residents. The Group used this information to develop management plans for the dunes. The recommendations have contributed to planning processes at three levels: (i) national coastal management plans; (ii) regional plans; and (iii) plans for further action at the local community level.     

Long-Term Tsunami Data Archive Supports Tsunami Forecast, Warning, Research, and Mitigation

In response to the 2004 Indian Ocean tsunami, the United States began a careful review and strengthening of its programs aimed at reducing the consequences of tsunamis. Several reports and calls to action were drafted, including the Tsunami Warning and Education Act (Public Law 109–424) signed into law by the President in December 2006. NOAA’s National Geophysical Data Center (NGDC) and co-located World Data Center for Geophysics and Marine Geology (WDC-GMG) maintain a national and international tsunami data archive that fulfills part of the P.L. 109-424. The NGDC/WDC-GMG long-term tsunami data archive has expanded from the original global historical event databases and damage photo collection, to include tsunami deposits, coastal water-level data, DART? buoy data, and high-resolution coastal DEMs. These data are used to validate models, provide guidance to warning centers, develop tsunami hazard assessments, and educate the public about the risks from tsunamis. In this paper we discuss current steps and future actions to be taken by NGDC/WDC-GMG to support tsunami hazard mitigation research, to ultimately help save lives and improve the resiliency of coastal communities.     

First results on determination of cosmogenic 36Cl in limestone from the Yenicekale Complex in the Hittite capital of Hattusha (Turkey)

We have measured ³⁶Cl in three rock surfaces of the Yenicekale building complex in Hattusha (Bo?azköy, Turkey). Hattusha was the capital of Hittite Empire which lasted from about 1650/1600 to 1200 BC. At Yenicekale, Hittite masons flattened the summit of an outcropping limestone knoll to form an artificial platform as the foundation for a building. Next they built a circuit wall along the lateral precipices of the flattened bedrock platform. We took one sample from the limestone bedrock platform and two samples from limestone building blocks of the circuit wall for cosmogenic ³⁶Cl analysis. Calculated exposure ages are 20 ± 1 ka for the sample from the bedrock platform and 24 ± 1 ka and 52 ± 2 ka for the circuit wall blocks. These exposure ages are significantly older than the age expected based on the estimated time of construction between 3.2 ka and 3.7 ka. We conclude that the sampled surfaces contain significant inherited cosmogenic ³⁶Cl. We cannot directly determine exposure ages for the building complex based on these three samples. On the other hand we may use the measured concentrations to determine how much of the rock was removed from the platform during flattening. To this end we modeled the variation of ³⁶Cl production with depth at Yenicekale using the results from the bedrock sample. We conclude that the Hittite masons removed only around 3 m from top of the limestone block. This means that the volume of rock removed from the bedrock platform is significantly less than the volume in the circuit wall atop the platform. They did not gain enough rock from this flattening to make the building. In agreement with this, the first results of our detailed microfacies analysis indicate that many of the building blocks are not of the same facies as the underlying limestone and must have been quarried elsewhere. Although we were not able to exposure date the Yenicekale complex due to the presence of inherited ³⁶Cl, our data suggest that Hittite masons excavated (most of) the building stones not at Yenicekale, but in quarries outside of Hattusha and then transported them to the construction site. These quarries have not yet been identified.