Comparison of Delivery Methods for Enhanced In Situ Remediation in Clay Till

Three methods for enhanced delivery of in situ remediation amendments in low-permeability deposits have been tested at a site in Denmark: pneumatic fracturing, direct-push delivery, and hydraulic fracturing. The testing was carried out at an uncontaminated part of a farm site, previously used for storage of chlorinated solvents, underlain by basal clay till with hydraulic conductivity ranging from 7.1× 10^–11 to 3.5 × 10^–7 m/s at testing depths 2.5 to 9.5 m b.s. Fluorescent tracers fluorescein and rhodamine WT were delivered. Tests of all three delivery methods have not been carried out at a single site before, and thus, this study provides unique data for comparison of enhanced delivery methods in both the vadose and saturated zone. Results show that pneumatic fracturing with nitrogen gas and propagation pressures of 1 to 9 bar had a distribution radius of less than 2 m, and produced dense networks of tracer-filled natural fractures above the redox boundary (0 to 3 m b.s.) and widely spaced, discrete, induced, tracer-filled subhorizontal fractures at depth (>3 m b.s.). Direct-push delivery at pressures of 8 to 30 bar had a distribution radius of approximately 1 m, distributed tracer primarily in natural fractures above the redox boundary and in discrete, closely spaced (but not merging) induced fractures below the redox boundary. Hydraulic fracturing with a sand-guar mixture at pressures of 0 to 6 bar produced an elliptical, asymmetrical, bowl-shaped fracture with a physical radius of approximately 3.5 m at 3 m b.s. The geometry of hydraulic fractures attempted emplaced at 6.5 and 9.5 m b.s. is uncertain, but clearly not horizontal as desired. The direct-push delivery method is robust and efficient for enhanced delivery at the clay till site in question, which based on thorough geological characterization is deemed a geologically representative basal clay till site.     

Measuring black hole spin in OJ287

We model the binary black hole system OJ287 as a spinning primary and a non-spinning secondary. It is assumed that the primary has an accretion disk which is impacted by the secondary at specific times. These times are identified as major outbursts in the light curve of OJ287. This identification allows an exact solution of the orbit, with very tight error limits. Nine outbursts from both the historical photographic records as well as from recent photometric measurements have been used as fixed points of the solution: 1913, 1947, 1957, 1973, 1983, 1984, 1995, 2005 and 2007 outbursts. This allows the determination of eight parameters of the orbit. Most interesting of these are the primary mass of ${1.84\cdot 10^{10}M_\odot}$ , the secondary mass ${1.40\cdot 10^{8} M_\odot}$ , major axis precession rate 39°.1 per period, and the eccentricity of the orbit 0.70. The dimensionless spin parameter is 0.28 ± 0.01 (1 sigma). The last parameter will be more tightly constrained in 2015 when the next outburst is due. The outburst should begin on 15 December 2015 if the spin value is in the middle of this range, on 3 January 2016 if the spin is 0.25, and on 26 November 2015 if the spin is 0.31. We have also tested the possibility that the quadrupole term in the post-Newtonian equations of motion does not exactly follow Einstein’s theory: a parameter q is introduced as one of the 8 parameters. Its value is within 30% (1 sigma) of the Einstein’s value q = 1. This supports the no-hair theorem of black holes within the achievable precision. We have also measured the loss of orbital energy due to gravitational waves. The loss rate is found to agree with Einstein’s value with the accuracy of 2% (1 sigma). There is a possibility of improving the accuracy of both quantities using the exact timing of the outburst on 21 July 2019. Because of closeness of OJ287 to the Sun (8–12°), the observations would be best carried out by a telescope in space.     

Depth Correlated Benthic Faunal Quantity and Infaunal Burrow Structures on the Slopes of a Marine Depression

In the northern part of the Kattegat, western Sweden, a series of marine depressions remain since the last glaciation. One of these, the well-oxygenated Alkor Deep, is about 3 km long and 800 m wide and with a depth of 138 m. Random depth-stratified sampling was made along four transects on the slopes including benthic macrofauna (0·1 m²grab samples) and sediment profile imaging. A significant positive correlation was found between depth and the faunal variables abundance and biomass. Deposit feeders such as Maldane sarsi, Heteromastus filiformis andAbra alba were among the dominants and may have been supported by down-slope advected organic material. In many images, pockets and extensive burrows were seen in the sediment that appeared to be constructed by the crustaceans Calocaris macandreae and Maera loveni. The ecological significance of their irrigation of the sediment is discussed. Due to the faunal activity deep down in the sediments of the slopes, the mean apparent redox potential discontinuity (RPD) was found as deep as between 8·0 and 11·3 cm depth, and RPD was significantly positively correlated with water depth. On the slopes there appears to be a balance between the input of organic material and the capacity of the benthic organisms to assimilate that carbon.     

Modelling the evolution of hydrochemical conditions in the Fennoscandian Shield during Holocene time using multidisciplinary information

Three-dimensional, large-scale models for groundwater flow and solute transport are used for the low-temperature, fractured crystalline rock sites in Sweden that are being considered for the geological disposal of spent nuclear fuel. It has been suggested that comparisons between measured and simulated present-day hydrochemical data provide a means to constrain the complex influences of past climatic events and to improve the ability to understand the palaeohydrogeological evolution of the physical system studied. Here the authors demonstrate how the integration of multidisciplinary data and models from one of the sites in Sweden (Forsmark) can aid the appraisal of the hydrochemical conditions at 8000 BC, which is the selected starting point for the palaeohydrogeological modelling of the hydrochemical conditions in the Fennoscandian Shield during the Holocene (last 10 ka). Since a firm understanding of the evolution of the hydrochemical conditions is important for the long-term safety assessment, recognition of the initial hydrochemical conditions is essential for the overall build-up of confidence in the modelling process.     

Effects of soil organic matter composition on unfrozen water content and heterotrophic CO2 production of frozen soils

Several recent studies have highlighted the importance of soil organic matter (SOM) mineralization at high latitudes during winter for ecosystem carbon (C) balances, and the ability of the soil to retain unfrozen water at sub-zero temperatures has been shown to be a major determinant of C mineralization rates. Further, SOM is believed to strongly influence the liquid water contents in frozen surface layers of boreal forest soils and tundra, but the mechanisms and specific factors involved are currently unknown. Here we evaluate the effects of the chemical composition of SOM on the amount of unfrozen water, the pore size equivalents in which unfrozen water can exist, and the microbial heterotrophic activity at sub-zero temperatures in boreal forest soils. To do this, we have characterized the chemical composition of SOM in forest soil samples (surface O-horizons) using solid state CP-MAS (cross polarization magic angle spinning) NMR spectroscopy. The acquired information was then used to elucidate the extent to which different fractions of SOM can explain the observed variations in unfrozen water content, pore size equivalents, and biogenic CO₂ production rates in the examined soil samples under frozen conditions (−4 °C). The data evaluation was done by the use of principal component analysis (PCA) and projections to latent structures by means of partial least square (PLS). We conclude that aromatic, O-aromatic, methoxy/N-alkyl and alkyl C are the major SOM components affecting frozen boreal forest soil’s ability to retain unfrozen water and sustain heterotrophic activity (95% confidence level). Our results reveal that solid carbohydrates have a significant negative impact (95% confidence level) on CO₂ production in frozen boreal spruce forest soils, in contrast to the positive effects of carbohydrate polymers during unfrozen conditions. We conclude that the hierarchy of environmental factors controlling SOM mineralization changes as soils freeze. The effect of SOM composition on pore size distribution and unfrozen water content has a superior influence on SOM mineralization and hence on heterotrophic CO₂ production of frozen soils.     

Balance Between Autotrophic and Heterotrophic Components and Processes in Microbenthic Communities of Sandy Sediments: A Field Study

The microscopic community of a microtidal sandy sediment on the Swedish west coast was studiedin situat two depths (0·5 and 4 m) on four occasions (January, April, August and October). Biomass of microalgae, bacteria, ciliates and meiofauna, as well as primary and bacterial productivity, were quantified. Meiofaunal grazing on algae and bacteria was measured simultaneously by radiolabelling intact sediment cores. Autotrophic biomass dominated the microbial community at both depths and on all sampling occasions, accounting for 47–87% of the microbial biomass. Meiofauna contributed 10–47%, while bacteria and ciliates together made up less than 6%. The microflora was dominated by attached (epipsammic) diatoms, but occasional ‘ blooms ’ of motile species occurred. Vital cells of planktonic diatoms contributed to benthic algal biomass in spring. Primary productivity exceeded bacterial productivity in April and August at both depths, while the balance was reversed in October and January. Meiofauna grazed between 2 and 12% of the algal biomass per day, and between 0·3 and 37% of the bacterial biomass. Almost an order of magnitude more algal (17–138 mg C m⁻²) than bacterial (0·1–33 mg C m⁻²) carbon was grazed daily. At the shallow site, primary productivity always exceeded grazing rates on algae, whereas at the deeper site, grazing exceeded primary productivity in October and January. Bacterial productivity exceeded grazing at both depths on all four occasions. Thus, meiofaunal grazing seasonally controlled microalgal, but not bacterial, biomass. These results suggest that, during summer, only a minor fraction (<10%) of the daily microbenthic primary production appears to enter the ‘ small food web ’ through meiofauna. During spring and autumn, however, a much larger fraction (≈30–60%) of primary production may pass through meiofauna. During winter, meiofaunal grazing is a less important link in the shallow zone, but at sublittoral depths, algal productivity may be limiting, and meiofauna depend on other food sources, such as bacteria and detritus.     

Finite element simulation of time dependent fracture and fragmentation processes in rock blasting

Two constitutive models for the simulation of fracture and fragmentation processes in rapidly loaded rocks are studied. The models were included in a wave propagation finite element code. The results obtained from the two models were compared by a study of the intensity and extent of fracturing obtained from two different configurations of explosive charge and reflecting surfaces in a plane strain problem. The evolution of the time dependent fracture pattern and fragmentation process is also presented.     

Identification and implications of fight hydrocarbon fluid inclusions from the Proterozoic Bidjovagge gold-copper deposit, Finnmark, Norway

Carbonic fluid inclusions were observed in quartz-bearing veins at the Proterozoic Bidjovagge AuCu deposit within the Kautokeino greenstone belt in Norway, where mineralization occurred in oxidation zones of graphitic schists. A primary fluid inclusion zonation was observed with C0₂-rich fluid inclusions in the structural footwall of the deposit, and CH₄-rich inclusions within the ore zone in the oxidation zone. Microthermometry of the primary hydrocarbon inclusions revealed 2 groups; (1) a group which homogenized between −125°C and the critical temperature of CH₄ (−82.1°C), which indicated the presence of pure CH₄, and (2) a group which homogenized between the critical temperature of CH₄ and −42°C, which indicated the presence CH₄ and higher hydrocarbons (HHC). Raman microprobe analyses of the first group confirmed the presence of CH₄. The second inclusion group were fluorescent, and Raman spectra clearly displayed CH₄,C₂H₆, and rarer C₃H₈ peaks. A typical feature of the Raman spectra were elevated baselines at the hydrocarbon peaks. Carbon peaks were also usually detected in each inclusion by Raman analysis. Bulk gas chromatography analyses of samples containing the first group (CH₄) indicated the presence of CH₄ and low concentrations of C₂H₆ and C₃H₈. Gas chromatography analyses of samples containing the second group (CH₄ and higher hydrocarbons) confirmed the presence of CH₄, and higher hydrocarbons such as C₂H₆ and C₃H₈ and also butanes. Based on the spacial zonation of hydrocarbons and the estimated PT conditions of 300 to 375°C and 2 to 4 kbars, the authors suggest an abiotic origin for the hydrocarbons. It is suggested that the hydrothermal fluids oxidized the graphitic schist, precipitated Cu and Au and formed light gas hydrocarbons.