A unified assessment of marine Mediterranean assemblages: a lesson from benthic hydroids

Hydroids are important components of the communities of rocky bottom shallow coastal areas. The hydrozoan fauna of the Mediterranean Sea is probably one of most investigated in the world, with lots of faunistic and biogeographical studies. However, quantitative studies using the same sampling methodology and controlled sampling effort have been restricted to areas in the Western and Central Mediterranean. We compared hydroid assemblages in four areas of the Mediterranean Sea, from the Gulf of Cádiz to the South Adriatic Sea, following the same sampling and quantification methodology. Our analysis showed the dominant Atlantic character of the assemblages of the Gulf of Cádiz and the South Alboran Sea because of the influence of the inflowing Atlantic waters. Conversely, the hydroid assemblages of the North Alboran Sea were more similar to the assemblages in the Ligurian and in the South Adriatic, and with a number of species ranking between the observed in these two Mediterranean zones. Fourteen species were identified as making the most significant contributions to characterizing the Mediterranean hydroid species pool from a quantitative point of view. These taxa include species previously named as typical components of the Mediterranean hydroid fauna as well as those only recently recorded in the region (Eudendrium moulouyensis) and invaders such as Clytia hummelincki.     

The Palaeocene–Middle Eocene deposits of Sardinia (Italy) and their palaeoclimatic significance

The Palaeocene of southern Sardinia includes a continental ferruginous sedimentation, with a high content of Al and Fe, indicative of a subhumid tropical climate. The subsequent microcodium carbonated detrital microcodium levels, containing an abundant quartzose fraction, rather suggest semiarid conditions. In SW Sardinia, the marine deposits, referred to Late Thanetian–Lower Ypresian (=Ilerdian) times, are limestones including larger foraminifers and contain significant amounts of quartz. A lower content of detrital kaolinite points a sediment source from the surrounding areas with a semiarid climate. The occurrence, at the top of this unit, of small trochospiral rotaliids and larger amount of detrital kaolinite suggests a transition to a rainy tropical climate in the adjacent areas. These limestones pass gradually to carbonate sediments characterized by large amounts of detrital kaolinite and intercalated coal layers, with pollen of tropical palms, attributed to the Late Ypresian (=Cuisian)–Early Lutetian and referred to a humid-subhumid tropical climate.     

Remote Sensing-Derived Water Extent and Level to Constrain Hydraulic Flood Forecasting Models: Opportunities and Challenges

Accurate, precise and timely forecasts of flood wave arrival time, depth and velocity at each point of the floodplain are essential to reduce damage and save lives. Current computational capabilities support hydraulic models of increasing complexity over extended catchments. Yet a number of sources of uncertainty (e.g., input and boundary conditions, implementation data) may hinder the delivery of accurate predictions. Field gauging data of water levels and discharge have traditionally been used for hydraulic model calibration, validation and real-time constraint. However, the discrete spatial distribution of field data impedes the testing of the model skill at the two-dimensional scale. The increasing availability of spatially distributed remote sensing (RS) observations of flood extent and water level offers the opportunity for a comprehensive analysis of the predictive capability of hydraulic models. The adequate use of the large amount of information offered by RS observations triggers a series of challenging questions on the resolution, accuracy and frequency of acquisition of RS observations; on RS data processing algorithms; and on calibration, validation and data assimilation protocols. This paper presents a review of the availability of RS observations of flood extent and levels, and their use for calibration, validation and real-time constraint of hydraulic flood forecasting models. A number of conclusions and recommendations for future research are drawn with the aim of harmonising the pace of technological developments and their applications.     

Modeling groundwater/surface-water interactions in an Alpine valley (the Aosta Plain,NW Italy): the effect of groundwater abstraction on surface-water resources

A groundwater flow model of the Alpine valley aquifer in the Aosta Plain (NW Italy) showed that well pumping can induce river streamflow depletions as a function of well location. Analysis of the water budget showed that ～80% of the water pumped during 2 years by a selected well in the downstream area comes from the baseflow of the main river discharge. Alluvial aquifers hosted in Alpine valleys fall within a particular hydrogeological context where groundwater/surface-water relationships change from upstream to downstream as well as seasonally. A transient groundwater model using MODFLOW2005 and the Streamflow-Routing (SFR2) Package is here presented, aimed at investigating water exchanges between the main regional river (Dora Baltea River, a left-hand tributary of the Po River), its tributaries and the underlying shallow aquifer, which is affected by seasonal oscillations. The three-dimensional distribution of the hydraulic conductivity of the aquifer was obtained by means of a specific coding system within the database TANGRAM. Both head and flux targets were used to perform the model calibration using PEST. Results showed that the fluctuations of the water table play an important role in groundwater/surface-water interconnections. In upstream areas, groundwater is recharged by water leaking through the riverbed and the well abstraction component of the water budget changes as a function of the hydraulic conditions of the aquifer. In downstream areas, groundwater is drained by the river and most of the water pumped by wells comes from the base flow component of the river discharge.     

The European Water Framework Directive 2000/60/EC in the evaluation of the ecological status of watercourses. Case study: the river Chienti (central Apennines,Italy)

The quality of the river Chienti (eastern‐central Apennines, Italy) has been evaluated according to the Water Framework Directive 2000/60/EC, taking into consideration both biotic (animal and vegetable) and chemical parameters. In studying the biotic component, two indices were used: the E.B.I, Extended Biotic Index (version adapted to the Italian rivers), based on macroinvertebrates, and the EPI‐D, the Eutrophication and/or Pollution Index, based on diatoms. For both macroinvertebrates and diatoms, two samplings were conducted, one in June and the other in October 2003. Instead, according to the Italian Law 152/99 the chemical and bacteriological analyses were conducted monthly for the entire year. The results of biomonitoring and chemical‐bacteriological analyses unanimously demonstrated a good ecological situation for the upper section of the Chienti, though the situation tends to worsen as the river continues its descent and undergoes increased anthropogenic pressure. Data obtained were correlated with Spearman's coefficients and principal component analysis. Both statistical calculations showed clear, direct correlation between the two biotic indices and an inverse correlation between these and the chemical and bacteriological parameters. However, a few differences of judgement that emerged among the various indices highlight the importance of using them simultaneously in order to obtain a more accurate diagnosis of the ecological status of the watercourses.     

Simulation of dam-break waves on movable beds using a multi-stage centered scheme

This paper presents the application of the multi-stage first-order centered scheme GMUSTA to solve a two-phase flow model with four equations for simulating dam-break floods without and with sediment transport.Computation of generalized Riemann invariants can be particularly complex and costly in simulating dam-break floods with sediment transport.GMUSTA numerical scheme,which does not require complete knowledge of the eigenstructure of the hyperbolic mathematical model,offers a suitable and attractive option.The quality of the dam-break flood simulations with GMUSTA scheme is verified by comparing the results against laboratory tests and some experimental data available in the literature,on fixed and mobile bed conditions,with different bed materials and flush or stepped bottoms.The numerical results reproduce quite well the experimental evidence,proving that the model is capable of predicting the temporal evolution of the free-surface and the bed.The GMUSTA scheme,which is not only simple to implement but also both accurate and computationally efficient,is proposed as an appropriate tool for integrating non-equilibrium sediment-transport models.     

Lysosomal and lipid-associated parameters in the livers of three species of arctic seabird chicks: species differences and relationships with contaminant levels

Lysosomal membrane stability, lipofuscin (LF), malondialdehyde (MDA), neutral lipid (NL) levels, as well as halogenated organic compounds (HOCs), Cr, Cd, Pb and Fe concentrations were analyzed in liver of black-legged kittiwake (BK), herring gull (HG), and northern fulmar (NF) chicks. There were significant species differences in the levels of NL, LF and lysosomal membrane stability. These parameters were not associated with the respective HOC concentrations. LF accumulation was associated with increasing Cr, Cd and Pb concentrations. HG presented the lowest lysosomal membrane stability and the highest.LF and NL levels, which indicated impaired lysosomes in HG compared to NF and BK. Lipid peroxidation was associated with HOC and Fe²⁺ levels. Specific HOCs showed positive and significant correlations with MDA levels in HG. The study indicates that contaminant exposure can affect lysosomal and lipid associated parameters in seabird chicks even at low exposure levels. These parameters may be suitable markers of contaminant induced stress in arctic seabirds.     

A mafic-ultramafic cumulate sequence derived from boninite-type melts (Niagara Icefalls,northern Victoria Land,Antarctica)

The layered sequence from Niagara Icefalls (northern Victoria Land, Antarctica) is related to the Cambrian-Early Ordovician Ross Orogeny. The sequence consists of dunites, harzburgites, orthopyroxenites, melagabbronorites and gabbronorites of cumulus origin. The Mg# of olivine, spinel, orthopyroxene and clinopyroxene from these rocks yields positive correlations, thus indicating formation from melts that mainly evolved through fractional crystallisation. The following fractionation sequence was identified: olivine (up to 94 mol% forsterite) + Cr-rich spinel → olivine + orthopyroxene ± spinel → orthopyroxene → orthopyroxene + anorthite-rich plagioclase ± clinopyroxene. Clinopyroxenes retain the peculiar trace element signature of boninite melts, such as extremely low concentrations of HREE and HFSE, and LILE enrichment over REE and HFSE. U–Pb isotope data on zircons separated from a gabbronorite have allowed us to constrain the age of emplacement of the Niagara Icefalls sequence at ∼514 Ma. The occurrence of inherited zircons dated at ∼538 Ma indicates that the boninitic melts experienced, at least locally, crustal contamination. The Niagara Icefalls sequence can be related to a regional scale magmatic event that affected the eastern margin of the Gondwana supercontinent in the Middle Cambrian. We propose that the formation of the sequence was associated with the development of an embryonic back-arc basin in an active continental margin. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.