Occurrence of gorgosterol in diatoms of the genus Delphineis

The presence of the C₃₀ sterol gorgosterol (22,23-methylene-23,24-dimethylcholest-5-en-3ß-ol) and its analogues in some marine and freshwater environments is generally associated with invertebrate animals or dinoflagellates since there have been no reports of them in other microalgal classes. Here we show that two unialgal cultures of different species of the marine diatom Delphineis contain gorgosterol in addition to sterols more commonly found in diatoms. Our findings suggest that some reports of gorgosterol in seawater and marine sediments may well have an origin, at least in part, from diatoms.     

Multivariate analysis of sediment data from the upper and middle Odra River (Poland)

River pollution data are characterized by high variability. Multivariate statistical methods help to determine a complex set of these multidimensional data and to extract latent information (e.g. differently polluted areas, discharges). The chemometric methods can handle interactions between different pollutants and relationships among various sampling locations. This study presents an application of multivariate data analysis in the field of environmental pollution. The dataset consists of As, Cd, Cr, Cu, Fe, Ni, Mn, Pb and Zn contents of sediment samples collected in the upper and middle Odra River (Poland) in three sampling campaigns (November 1998, June 1999, and May 2000). As chemometric tools cluster analysis (CA), multivariate analysis of variance and discriminant analysis (MVDA) and factor analysis (FA) were used to investigate the matrix of 60 sampling points.     

New insights into the origin and migration of brines in deep Devonian aquifers, Alberta, Canada

Analysis of hydraulic heads and chemical compositions of Devonian formation waters in the west central part of the Alberta Basin, Canada, characterizes the origin of formation waters and migration of brines. The Devonian succession in the study area lies 2000–5000 m below the ground surface, and has an approximate total thickness of 1000 m and an average slope of 15 m/km. Four Devonian aquifers are present in the study area, which form two aquifer systems [i.e., a Middle–Upper Devonian aquifer system (MUDAS) consisting of the Elk Point and Woodbend–Beaverhill Lake aquifers, and an Upper Devonian aquifer system (UDAS) consisting of the Winterburn and Wabamun aquifers]. The Ireton is an effective aquitard between these two systems in the eastern parts of the study area. The entire Devonian succession is confined below by efficient aquitards of the underlying Cambrian shales and/or the Precambrian basement, and above by overlying Carboniferous shales of the Exshaw and Lower Banff Formations.The formation water chemistry shows that the Devonian succession contains two distinct brine types: a ‘heavy brine,’ located updip, defined approximately by TDS >200 g/l, and a ‘light brine’ with TDS <200 g/l. Hydraulic head distributions suggest that, presently, the ‘light brine’ attempts to flow updip, thereby pushing the ‘heavy brine’ ahead. The interface between the two brines is lobate and forms large-scale tongues that are due to channeled flow along high-permeability pathways. Geological and hydrogeochemical data suggest that the following processes determined the present composition of the ‘light’ and ‘heavy’ brines: original seawater, evaporation beyond gypsum but below halite saturation, dolomitization, clay dehydration, gypsum dewatering, thermochemical sulfate reduction (TSR), and halite dissolution. The influx of meteoric (from the south) and metamorphic (from the west) waters can be recognized only in the ‘light brine.’ Albitization can be unequivocally identified only in the ‘heavy brine.’ The ‘heavy brine’ may be residual Middle Devonian evaporitic brine from the Williston Basin or the Elk Point Basin, or it may have originated from partial dissolution of thick, laterally extensive Middle Devonian evaporite deposits to the east of the study area. The ‘light brine’ most probably originated from dilution of ‘heavy brine’ in post-Laramide times.     

Effects of in-situ conditions on relative permeability characteristics of CO2-brine systems

Carbon dioxide capture and geological storage (CCGS) is an emerging technology that is increasingly being considered for reducing greenhouse gas emissions to the atmosphere. Deep saline aquifers provide a very large capacity for CO₂ storage and, unlike hydrocarbon reservoirs and coal beds, are immediately accessible and are found in all sedimentary basins. Proper understanding of the displacement character of CO₂-brine systems at in-situ conditions is essential in ascertaining CO₂ injectivity, migration and trapping in the pore space as a residual gas or supercritical fluid, and in assessing the suitability and safety of prospective CO₂ storage sites. Because of lack of published data, the authors conducted a program of measuring the relative permeability and other displacement characteristics of CO₂-brine systems for sandstone, carbonate and shale formations in central Alberta in western Canada. The tested formations are representative of the in-situ characteristics of deep saline aquifers in compacted on-shore North American sedimentary basins. The results show that the capillary pressure, interfacial tension, relative permeability and other displacements characteristics of CO₂-brine systems depend on the in-situ conditions of pressure, temperature and water salinity, and on the pore size distribution of the sedimentary rock. This paper presents a synthesis and interpretation of the results.     

Novel basin modelling concept for simulating deformation from mechanical compaction using level sets

As sedimentation progresses in the formation and evolution of a depositional geologic basin, the rock strata are subject to various stresses. With increasing lithostatic pressure, compressional forces act to compact the porous rock matrix, leading to overpressure buildup, changes in the fluid pore pressure and fluid flow. In the context of petroleum systems modelling, the present study concerns the geometry changes that a compacting basin experiences subject to deposition. The purpose is to track the positions of the rock layer interfaces as compaction occurs. To handle the challenge of potentially large geometry deformations, a new modelling concept is proposed that couples the pore pressure equation with a level set method to determine the movement of lithostratigraphic interfaces. The level set method propagates an interface according to a prescribed speed. The coupling term for the pore pressure and level-set equations consists of this speed function, which is dependent on the compaction law. The two primary features of this approach are the simplicity of the grid and the flexibility of the speed function. A first evaluation of the model concept is presented based on an implementation for one spatial dimension accounting for vertical effective stress. Isothermal conditions with a constant fluid density and viscosity were assumed. The accuracy of the implemented numerical solution for the case of a single stratigraphic unit with a linear compaction law was compared to the available analytical solution [38]. The multi-layer setup and the nonlinear case were tested for plausibility.     

A dated volcano-tectonic deformation event in Jan Mayen causing landlocking of Arctic charr

We provide the first documentation of tectonic deformation resulting from a volcanic eruption on the island of Jan Mayen. Vertical displacement of about 14 m southwest of the stratovolcano Beerenberg is associated with an eruption in ad 1732 on its southeastern flank. The age of the uplift event is bracketed by radiocarbon-dated driftwood buried by material deposited due to uplift, and by tephra from this eruption. Constraints, inferred from radiocarbon ages alone, allow for the possibility that uplift was completed prior to the ad 1732 eruption. However, the occurrence of tephra in the sediment column indicates that some displacement was ongoing during the eruption but ceased before the eruption terminated. We attribute the tectonic deformation to intrusion of shallow magma associated with the volcanic eruption. Our results complement previous studies of volcanic activity on Jan Mayan by providing precise age constraints for past volcanic activity. Also, it raises new hypotheses regarding the nature, timing and prevalence of precursor tectonic events to Jan Mayan eruptions. The uplift caused the complete isolation of a coastal lake by closing its outlet to the sea, thus landlocking the facultative migratory fish species Arctic charr (Salvelinus alpinus).     

On the present habitats and ecology of Vertigo pseudosubstriata Ložek, 1954 (Mollusca,Gastropoda, Vertiginidea) in Central Asia and its distribution history in Central and Eastern Europe

The small terrestrial gastropod Vertigo pseudosubstriata Ložek, 1954 is one of the rarest glacial indicator species in the Pleistocene of Central and Eastern Europe. In all, this species has been found at only about 15 sites in Europe. V. pseudosubstriata was initially described as a fossil in Central Europe and was discovered only later alive in Central Asia. With regard to its modern distribution, 25 habitats with V. pseudosubstriata have been examined in Tien Shan and in the central and southern Altai. These findings seem to capture the contemporary distribution of the species and provide information on the boundaries of its ecological requirements. These data are of great significance for the interpretation of the fossil assemblages. Since the few fossil specimens in Europe date from very different glacial periods in the Elsterian, Saalian Complex and Weichselian, it can be concluded that V. pseudosubstriata apparently immigrated in at least three distinct waves. Most of the Pleistocene specimens in eastern Central Europe and Eastern Europe are reported from archaeological sites of the Upper Middle Weichselian (Gravettian), roughly between 33 and 29 ka cal bp. In this paper, we review all reported modern and fossil occurrences and discuss the species' ecological range.     

Corrosion-induced gas generation in a nuclear waste repository: Reactive geochemistry and multiphase flow effects

Corrosion of steel canisters, stored in a repository for spent fuel and high-level nuclear wastes, leads to the generation and accumulation of H₂ gas in the backfilled emplacement tunnels, which may significantly affect long-term repository safety. Previous studies have used H₂ generation rates based on the volume of the waste or canister material and the stoichiometry of the corrosion reaction. However, Fe corrosion and H₂ generation rates vary with time, depending on factors such as amount of Fe, water availability, water contact area and aqueous and solid chemistry. To account for these factors and feedback mechanisms, a chemistry model was developed related to Fe corrosion, coupled with two-phase (liquid and gas) flow phenomena that are driven by gas-pressure buildup associated with H₂ generation and water consumption. Results indicate that by dynamically calculating H₂ generation rates based on a simple model of corrosion chemistry, and by coupling this corrosion reaction with two-phase flow processes, the degree and extent of gas-pressure buildup could be much smaller compared to a model that neglects the coupling between flow and reactive transport mechanisms. By considering the feedback of corrosion chemistry, the gas pressure increases initially at the canister, but later decreases and eventually returns to a stabilized pressure that is slightly higher than the background pressure. The current study focuses on corrosion under anaerobic conditions for which the coupled hydrogeochemical model was used to examine the role of selected physical parameters on H₂ gas generation and corresponding pressure buildup in a nuclear waste repository. The developed model can be applied to evaluate the effect of water and mineral chemistry of the buffer and host rock on the corrosion reaction for future site-specific studies.     

Different types of methane monooxygenases produce similar carbon and hydrogen isotope fractionation patterns during methane oxidation

We determined the stable carbon and hydrogen isotope fractionation factors for methane oxidation under oxic conditions using strains with known degradation pathways. The aerobic oxidation of methane can be initiated by two different forms of enzymes known as methane monooxygenases (MMO). The expression of these enzymes is type-specific and dependent upon the adjusted copper concentration in the medium (or environment). In this study, the expression of either the soluble MMO or the particulate MMO was supported by adjusting the copper concentrations in the growth medium. Taxonomically different aerobic methanotrophic strains, mainly belonging to the alpha- and gamma- classes of Proteobacteria, produced methane isotope enrichment factors (ε_bulk) ranging from −14.8 to −27.9‰ for carbon, and from −110.0 to −231.5‰ for hydrogen. The ratio of hydrogen versus carbon discrimination (Λ = (α_H⁻¹ − 1)/(α_C⁻¹ − 1) ≈ Δ(δ²H)/Δ(δ¹³C)) were similar for all tested cultures, and are also identical to values calculated from previously published enrichment factors for aerobic and anaerobic methane degradation. In contrast, Λ-values for the abiotic oxidation of methane with OH radicals (this process is considered as the main removal process for methane from the atmosphere) were significantly higher than the values derived from biotic oxidation. Due to the low variability of microbial methane isotope fractionation patterns, we propose that combined carbon and hydrogen isotope fractionation analyses can be used to monitor and assess the occurrence of microbial methane oxidation in marine or terrestrial environments. However, it is not possible to distinguish distinct aerobic or anaerobic methane-oxidation pathways by this approach.