Feasibility of utilizing wavelet phase to map the CO2 plume at the Ketzin pilot site,Germany

Spectral decomposition is a powerful tool that can provide geological details dependent upon discrete frequencies. Complex spectral decomposition using inversion strategies differs from conventional spectral decomposition methods in that it produces not only frequency information but also wavelet phase information. This method was applied to a time‐lapse three‐dimensional seismic dataset in order to test the feasibility of using wavelet phase changes to detect and map injected carbon dioxide within the reservoir at the Ketzin carbon dioxide storage site, Germany. Simplified zero‐offset forward modelling was used to help verify the effectiveness of this technique and to better understand the wavelet phase response from the highly heterogeneous storage reservoir and carbon dioxide plume. Ambient noise and signal‐to‐noise ratios were calculated from the raw data to determine the extracted wavelet phase. Strong noise caused by rainfall and the assumed spatial distribution of sandstone channels in the reservoir could be correlated with phase anomalies. Qualitative and quantitative results indicate that the wavelet phase extracted by the complex spectral decomposition technique has great potential as a practical and feasible tool for carbon dioxide detection at the Ketzin pilot site.     

High spatio-temporal resolution measurements of cohesive sediment erosion

In this study, we present a novel approach to measure fundamental processes of cohesive sediment erosion. The experimental setup consists of a laboratory erosion flume (SETEG) and a photogrammetric method to detect sediment erosion (PHOTOSED). Detailed data are presented for three erosion experiments, which were conducted with a natural non-cohesive/cohesive sediment mixture at increasing sediment depths (4, 8, 16 cm). In each experiment, the sediment was exposed to a set of incrementally increasing shear stresses and the erosion was measured dynamically, pixel-based, and approximate to the process scale given the resolution of PHOTOSED. This enables us to distinguish between (i) individual emerging erosion spots caused by surface erosion and (ii) large holes torn open by detached aggregate chunks. Moreover, interrelated processes were observed, such as (iii) propagation of the erosion in the longitudinal and lateral direction leading to merging of disconnected erosion areas and (iv) progressive vertical erosion of already affected areas. By complementing the (bulk) erosion volume profiles with additional quantitative variables, which contain spatial information (erosion area, specific deepening, number of disconnected erosion areas), conclusions on the erosion behaviour (and the dominant processes) can be drawn without requiring qualitative information (such as visual observations). In addition, we provide figures indicating the spatio-temporal erosion variability and the (bulk) erosion rates for selected time periods. We evaluate the variability by statistical quantities and show that significant erosion is mainly confined to only a few events during temporal progression, but then considerably exceeds the time-averaged median of the erosion (factors between 7.0 and 16.0). Further, we point to uncertainties in using (bulk) erosion rates to assess cohesive sediment erosion and particularly the underlying processes. As a whole, the results emphasise the need to measure cohesive sediment erosion with high spatio-temporal resolution to obtain reliable and robust information. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Towards the representation of groundwater in the Joint UK Land Environment Simulator

Groundwater is an important component of the hydrological cycle with significant interactions with soil hydrological processes. Recent studies have demonstrated that incorporating groundwater hydrology in land surface models (LSMs) considerably improves the prediction of the partitioning of water components (e.g., runoff and evapotranspiration) at the land surface. However, the Joint UK Land Environment Simulator (JULES), an LSM developed in the United Kingdom, does not yet have an explicit representation of groundwater. We propose an implementation of a simplified groundwater flow boundary parameterization (JULES-GFB), which replaces the original free drainage assumption in the default model (JULES-FD). We tested the two approaches under a controlled environment for various soil types using two synthetic experiments: (1) single-column and (2) tilted-V catchment, using a three-dimensional (3-D) hydrological model (ParFlow) as a benchmark for JULES’ performance. In addition, we applied our new JULES-GFB model to a regional domain in the UK, where groundwater is the key element for runoff generation. In the single-column infiltration experiment, JULES-GFB showed improved soil moisture dynamics in comparison with JULES-FD, for almost all soil types (except coarse soils) under a variety of initial water table depths. In the tilted-V catchment experiment, JULES-GFB successfully represented the dynamics and the magnitude of saturated and unsaturated storage against the benchmark. The lateral water flow produced by JULES-GFB was about 50% of what was produced by the benchmark, while JULES-FD completely ignores this process. In the regional domain application, the Kling-Gupta efficiency (KGE) for the total runoff simulation showed an average improvement from 0.25 for JULES-FD to 0.75 for JULES-GFB. The mean bias of actual evapotranspiration relative to the Global Land Evaporation Amsterdam Model (GLEAM) product was improved from −0.22 to −0.01 mm day⁻¹. Our new JULES-GFB implementation provides an opportunity to better understand the interactions between the subsurface and land surface processes that are dominated by groundwater hydrology.     

Ceres’ spectral link to carbonaceous chondrites—Analysis of the dark background materials

Ceres’ surface has commonly been linked with carbonaceous chondrites (CCs) by ground‐based telescopic observations, because of its low albedo, flat to red‐sloped spectra in the visible and near‐infrared (VIS/NIR) wavelength region, and the absence of distinct absorption bands, though no currently known meteorites provide complete spectral matches to Ceres. Spatially resolved data of the Dawn Framing Camera (FC) reveal a generally dark surface covered with bright spots exhibiting reflectance values several times higher than Ceres’ background. In this work, we investigated FC data from High Altitude Mapping Orbit (HAMO) and Ceres eXtended Juling (CXJ) orbit (~140 m/pixel) for global spectral variations. We found that the cerean surface mainly differs by spectral slope over the whole FC wavelength region (0.4–1.0 μm). Areas exhibiting slopes ?1 constitute only ~3% of the cerean surface and mainly occur in the bright material in and around young craters, whereas slopes ≥?10% μm^?1 occur on more than 90% of the cerean surface; the latter being denoted as Ceres’ background material in this work. FC and Visible and Infrared Spectrometer (VIR) spectra of this background material were compared to the suite of CCs spectrally investigated so far regarding their VIS/NIR region and 2.7 μm absorption, as well as their reflectance at 0.653 μm. This resulted in a good match to heated CI Ivuna (heated to 200–300 °C) and a better match for CM1 meteorites, especially Moapa Valley. This possibly indicates that the alteration of CM2 to CM1 took place on Ceres.     

Laboratory characterization of bent monocrystal wafers for Bragg X-ray spectroscopy

We describe our laboratory procedures for precise measurements of lattice surface profile, where Bragg reflection takes place, of bent monocrystal wafers. A comparison of X-ray spectrometer characteristics for perfect and real crystals is presented. The described procedures will be used to measure the properties of the crystals that will be used as the dispersive elements in the future solar X-ray spectrometers SolpeX and ChemiX.     

The planet formation imager

The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially sensitive to thermal emission from young exoplanets (and their disks) with a high spectral resolution mode to probe the kinematics of CO and H₂O gas. In this paper, we give an overview of the main science goals of PFI, define a baseline PFI architecture that can achieve those goals, point at remaining technical challenges, and suggest activities today that will help make the Planet Formation Imager facility a reality.     

New insights into Southern Caucasian glacial–interglacial climate conditions inferred from Quaternary gastropod fauna

In the present study, we performed gastropod analyses on loess–palaeosol sequences from northeast Armenia (Southern Caucasia) covering at least three glacial–interglacial cycles. The elaborated ecostratigraphy shows significant patterns of species composition related to the succession of pedocomplexes and loess, respectively. Pedocomplexes included species that can be associated with high-grass to forest-steppe biomes, indicating increased humidity for these sections compared to the loess layers. In contrast, loess layers that relate to glacial periods are associated with gastropod species of semidesert environments with shrub- and shortgrass-steppes, indicating semiarid to arid conditions. Furthermore, the loess deposits do not show any evidence for cold-adapted gastropod species. Therefore, we suggest that average July temperatures in the study area were above 10 °C, even during periods of loess deposition. Consequently, we propose that the limiting factor for tree growth during glacial periods was aridity, rather than temperature. In addition, we observe environmental differences between the various glacial times, with our results indicating a trend towards steadily increasing aridity in Southern Caucasia across the Middle to Late Pleistocene.     

Hekla 1947, 1845, 1510 and 1158 tephra in Finland: challenges of tracing tephra from moderate eruptions

Several cryptotephra layers that originate from Icelandic volcanic eruptions with a volcanic explosivity index (VEI) of ≤ 4 and tephra volumes of < 1 km³ have previously been identified in Northern Europe, albeit within a restricted geographical area. One of these is the Hekla 1947 tephra that formed a visible fall-out in southern Finland. We searched for the Hekla 1947 tephra from peat archives within the previously inferred fall-out zone but found no evidence of its presence. Instead, we report the first identification of Hekla 1845 and Hekla 1510 cryptotephra layers outside of Iceland, the Faroe Islands, Ireland and the UK. Additionally, Hekla 1158 tephra was found in Finland for the first time. Our results confirm that Icelandic eruptions of moderate size can form cryptotephra deposits that are extensive enough to be used in inter-regional correlations of environmental archives and carry a great potential for refining regional tephrochronological frameworks. Our results also reveal that Icelandic tephra has been dispersed into Finnish airspace at least seven times during the past millennium and in addition to a direct eastward route the ash clouds can travel either via a northerly or a southerly transport pathway.     

On standardizing the ‘Water Drop Penetration Time’ and the ‘Molarity of an Ethanol Droplet’ techniques to classify soil hydrophobicity: A case study using medium textured soils

Two common methods to assess soil hydrophobicity are the ‘Water Drop Penetration Time’ and ‘Molarity of an Ethanol Droplet’ techniques. For these, uncertainty exists regarding the representativeness of laboratory tests reflecting field conditions, their replicability, and the comparability of results between the two techniques. Using air-dried soils with a broad particle size and hydrophobicity range, this study shows that a high representativeness and replicability of results can be achieved. A close relationship between the two tests was found for highly, but not for moderately hydrophobic soils. Guidelines are suggested to increase representativeness, replicability and comparability of results in future studies. © 1998 John Wiley & Sons, Ltd.     

The 2010 tsunami in Chile: Devastation and survival of coastal small-scale fishing communities

In 2010, a tsunami generated by a magnitude 8.8 earthquake struck the central-south zone of Chile. This short communication reports the direct impacts on the small-scale artisanal fishing capacity and coastal livelihoods along approximately 600 km of the coastline. Despite the magnitude of the catastrophe, the absence of official warnings, and the failure of telecommunication networks only 8 fisher victims were reported out of a total death toll of more than 170. Results show that this trend is explained by socio-cultural assets and a natural hazard subculture. This highlights the need to integrate contextual and behavioural approaches in disaster management and rehabilitation policies.