Extracting sea level residual in tidally dominated estuarine environments

Sea level comprises a mean level, tidal elevation and a residual elevation. Knowledge of what causes maximum water levels is often key in coastal management. However, different methods to extract deviations in water level (residuals) from modelled and observed elevation can give different results. The Dee Estuary, northwest England is a macrotidal estuary that undergoes periodic stratification. It is used here to demonstrate methods to extract the residual water level in response to the following interactive processes: tidal, river-induced stratification and flow, meteorology and waves. Using modelling techniques, the interaction and contribution of different physical processes are investigated. Classical harmonic tidal analysis, model simulations and filtering techniques have been used to “de-tide” the total elevation for short-term (approximately month long) records. Each technique gives a different result highlighting the need to select the correct method for a required study. Analysis of the residual components demonstrates that all processes inducing residuals interact with the tide generating a semi-diurnal residual component. It is suggested that modelling methods enable the full effect of tidal interaction to remain in the residual, whilst harmonic tidal analysis (partly) modify and filtering methods (fully) remove this component of the residual. The analysis methods presented and their influences on the resultant residual are applicable to other study sites. However, when applied specifically to the mouth of the Dee Estuary, the external surge is found to be the main contributor to the total residual, whilst local wind and stratification effects are of secondary importance.     

Modeling flocculation in a hypertidal estuary

When fine particles are involved, cohesive properties of sediment can result in flocculation and significantly complicate sediment process studies. We combine data from field observations and state-of-the-art modeling to investigate and predict flocculation processes within a hypertidal estuary. The study site is the Welsh Channel located at the entrance of the Dee Estuary in Liverpool Bay. Field data consist of measurements from a fixed site deployment during 12–22 February 2008. Grain size, suspended sediment volume concentration, and current velocity were obtained hourly from moored instruments at 1.5 m above bed. Near-bottom water samples taken every hour from a research vessel are used to convert volume concentrations to mass concentrations for the moored measurements. We use the hydrodynamic model Proudman Oceanographic Laboratory Coastal Ocean Modelling System (POLCOMS) coupled with the turbulence model General Ocean Turbulence Model (GOTM) and a sediment module to obtain three-dimensional distributions of suspended particulate matter (SPM). Flocculation is identified by changes in grain size. Small flocs were found during flood and ebb periods—and correlate with strong currents—due to breakup, while coarse flocs were present during slack waters because of aggregation. A fractal number of 2.4 is found for the study site. Turbulent stresses and particle settling velocities are estimated and are found to be related via an exponential function. The result is a simple semiempirical formulation for the fall velocity of the particles solely depending on turbulent stresses. The formula is implemented in the full three-dimensional model to represent changes in particle size due to flocculation processes. Predictions from the model are in agreement with observations for both settling velocity and SPM. The SPM fortnight variability was reproduced by the model and the concentration peaks are almost in phase with those from field data.     

Bioadsorption by sugarcane bagasse for the reduction in oil and grease content in aqueous effluent

Several techniques have been used to reduce the oil and grease content in aqueous streams; one excellent is bioadsorption. With a view to provide a sustainable method for the treatment of oily effluents, the aim of this study was to evaluate sugarcane bagasse as bioadsorbent to reduce the oil and grease content of aqueous effluents. Analysis of the material was performed, and the adsorption experiments were in a batch system, using a synthetic effluent. The results showed that the kinetic equilibrium occurred in 0.08 h of contact. The study of influence of pH of the aqueous phase and the temperature showed that the adsorption capacity was proportional to the pH value, but inversely proportional to the temperature. The adsorption isotherm was obtained at a temperature of 298.15 K using the Langmuir and Langmuir–Freundlich models, and the maximum adsorption capacity obtained was 6.65 kg of hydrocarbon per kg of bioadsorbent. It was verified that sugarcane bagasse represents an excellent material for application in the treatment of oily aqueous effluents, since it is associated with low cost and a high adsorption capacity. The variation in the adsorption capacity observed as a function of pH of the aqueous phase was not found to be significant. This is an important characteristic of the material in terms of its industrial application, verifying the possibility for its implementation in any treatment process, demonstrating the great potential of sugarcane bagasse for use as a sustainable alternative in the reduction in oil and grease in aqueous effluents.     

Magnetic fabrics and rock magnetism of Proterozoic dike swarm from the southern São Francisco Craton, Minas Gerais State, Brazil

Magnetic fabric and rock magnetism studies were performed on 32 mafic dikes of a Proterozoic dike swarm from the southern São Francisco Craton (SFC; Minas Gerais State, SE Brazil). Magnetic anisotropies were determined by applying anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of remanent magnetization (ARM). The latter was performed imposing both anhysteretic (total (AAR) and partial pAAR)) and isothermal remanence magnetizations (AIRM). Partial anhysteretic remanence anisotropy was performed based on remanent coercivity spectra from a pilot specimen of each site. In most sites, AMS is dominantly carried by ferromagnetic minerals, however, in some sites, the paramagnetic contribution exceeds 70% of bulk susceptibility. Rock magnetism and thin section analysis allow classifying the dikes as non-hydrothermalized and hydrothermalized. Magnetic measurement shows that the mean magnetic susceptibility is usually lower than 5×10⁻³ (SI). Ti-poor titanomagnetites up to pure magnetite pseudo-single-domain (PSD) grain sizes carry the majority of magnetic fabrics for non-hydrothermalized dikes whereas coarse to fine grained Ti-poor titanomagnetites carry the majority of magnetic fabrics for hydrothermalized dikes.Three primary AMS fabrics are recognized which are coaxial with ARM fabric, except for two dikes, from both non-hydrothermalized and hydrothermalized dikes. Normal AMS fabric surprisingly is not dominant (31%). The parallelism between AMS, pAAR_0–30, pAAR_30–60 and pAAR_60–90 fabrics in the hydrothermalized dikes indicates that magnetic grains formed due to late-stage crystallization or to remobilization of iron oxides due to hydrothermal alteration after dike emplacement have acquired a mimetic fabric coaxial with the primary fabric given by coarse-grained early crystallized Ti-poor titanomagnetites. This fabric is interpreted as magma flow in which the analysis of K_max inclination permitted the inference that the dikes were fed by horizontal or subhorizontal fluxes (K_max<30°). Intermediate AMS fabric is the most important (41%) in the investigated swarm. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. ARM determinations for these sites also remained intermediate except for two dikes. In one of them, AIRM fabric resulted in normal AMS fabric while for the other AAR fabric resulted in inverse AMS fabric. A combination of AMS and ARM fabrics suggest that magmatic fabric for both dikes were overprinted by some late local event, probably related to Brasiliano orogenic processes after dike emplacement. InverseInverse AMS fabric is a minority (four dikes). ARM determinations also remained inverse suggesting a primary origin for inverse AMS fabric.     

Evidence for mass-dependent isotopic fractionation of strontium in a glaciated granitic watershed

The stable isotope composition of strontium (expressed as δ^88/86Sr) may provide important constraints on the global exogenic strontium cycle. Here, we present δ^88/86Sr values and ⁸⁷Sr/⁸⁶Sr ratios for granitoid rocks, a 150 yr soil chronosequence formed from these rocks, surface waters and plants in a small glaciated watershed in the central Swiss Alps. Incipient chemical weathering in this young system, whether of inorganic or biological origin, has no resolvable effect on the ⁸⁷Sr/⁸⁶Sr ratios and δ^88/86Sr values of bulk soils, which remain indistinguishable from bedrock in terms of Sr isotopic composition. Although due in part to the chemical heterogeneity of the forefield, the lack of a resolvable difference between soil and bedrock isotopic composition indicates that these soils have thus far witnessed minimal net loss of Sr; a low degree of chemical weathering is also implied by bulk soil chemistry. The isotopic composition of Sr in streamwater is more radiogenic than median soil, reflecting the preferential weathering of biotite in the catchment; streamwater δ^88/86Sr values, however, are indistinguishable from bulk soil δ^88/86Sr values, implying that no resolvable fractionation of Sr isotopes takes place during release to the weathering flux in the Damma forefield. Analyses of plant tissue reveal that plants (Rhododendron and Vaccinium) preferentially assimilate the lighter isotopes of Sr such that their δ^88/86Sr values are significantly lower than those of the soils in which they grow. Additionally, δ^88/86Sr values of foliar and floral tissues are lower than those of roots, contrary to observations for Ca, for which Sr is often used as an analogue in weathering studies. We suggest that processes that discriminate against Sr in favour of Ca, due to the different nutritional requirement of plants for these two elements, are responsible for the observed contrast.     

Modified column flotation of adsorbing iron hydroxide colloidal precipitates

A promising technique for the removal of heavy metal ions from wastewater streams involved firstly the ions adsorption on a colloidal precipitate (carrier) and then the separation of the loaded flocs (coagula) by a modified column flotation. Here, the effluent feed and the carrier (ferric hydroxide) enter smoothly by the top of the column through a special diffuser, in counter current with rising bubbles (100–600 μm diameter) generated by using recycled water, surfactant and air suction through a venturi. High separation values of the column flotation of the carrier precipitates were achieved, despite the high superficial flow rate and the high Fe^+ 3 concentration utilized (> 60 mg L^− 1 Fe). No rupture of colloidal carrier aggregates was observed and a low split was ensured by monitoring the concentrate (floated product) flow rate. Results indicated that best separation was attained by controlling the medium pH (for best heavy metal ion adsorption onto the carrier), followed by sodium oleate, used as “collector” and optimizing operating parameters (conditioning, flow rates, etc.). The column throughput reached 43 m h^− 1 (m³ m^− 2 h^− 1), which is about 4 times the normal capacity of DAF-dissolved air flotation unit, the most used floater in wastewater treatment. Various metals (Cu, Ni, Pb, etc.) and molybdate ions present in synthetic and real effluent were successfully removed based on this colloidal adsorbing flotation principle. The process was also applied in a pilot scale to treat an industrial electroplating wastewater. Most of toxic metals (Cu, Ni and Zn) were reduced from initial concentrations of about of 2 to 10 mg L^− 1, to below 0.5 to 1.0 mg L^− 1, meeting local municipal discharge limits (but Cd ions). It is believed that flotation separation using medium-sized bubbles has great potential as a clean water and wastewater treatment technology.     

A new U–Pb zircon age dating and palynological data from a Lower Permian section of the southernmost Paraná Basin,Brazil: Biochronostratigraphical and geochronological implications for Gondwanan correlations

Index species useful for correlations with the International Stratigraphical Column are rare or absent in the Pennsylvanian–Permian strata of the Paraná Basin in Brazil, preventing accuracy in geochronologic assignments. Besides, absolute datings are very scarce in comparison with other Gondwana basins. This paper presents palynological data from an outcrop on the surroundings of the Candiota coal mine, southmost Brazil, from several levels of the Rio Bonito and Palermo formations. The presence of certain index species of spore–pollen allowed the recognition of two Permian palynozones: the Vittatina costabilis and the Lueckisporites virkkiae zones. Furthermore, U–Pb in zircons from a volcaniclastic level interbedded in the coal strata of the former unit was analyzed through LA-MC-ICP-MS method, providing a new absolute age dating of 281.4 ± 3.4 Ma (Cisuralian, Early Permian). This dating is assumed as the oldest occurrence of the L. virkkiae Zone in Paraná Basin, which contains index species that are widespread in other Gondwana basins. A well distributed surface boundary occurs in this section also, allowing local and regional correlations. These new biostratigraphical and geochronological data are integrated, in order to offer a deep analysis on the stratigraphical significance for correlations across the Occidental Gondwana.     

Effects of rotation on the colours and line indices of stars 6. The reality of the blue straggler phenomenon

The effect of rotation on the observed colours of stars has been considered as a possible cause for the blue straggler phenomenon in clusters listed by Mermilliod (1982). It appears that this phenomenon is definitely not real in the case of the late B and early A spectral type blue stragglers that are intrinsic slow rotators. Among clusters containing the early B type blue stragglers it is found that the anomalous position of the stragglers in NGC 6633, NGC 6475 and NGC 2516 cannot be accounted for by rotation effects alone. on leave from Assumption College, Changanacherry, Kerala.     

Recent trends in annual snowline variations in the northern wet outer tropics: case studies from southern Cordillera Blanca,Peru

TL-moments approach has been used in an analysis to identify the best-fitting distributions to represent the annual series of maximum streamflow data over seven stations in Johor, Malaysia. The TL-moments with different trimming values are used to estimate the parameter of the selected distributions namely: Three-parameter lognormal (LN3) and Pearson Type III (P3) distribution. The main objective of this study is to derive the TL-moments (t ₁,0), t ₁?=?1,2,3,4 methods for LN3 and P3 distributions. The performance of TL-moments (t ₁,0), t ₁?=?1,2,3,4 was compared with L-moments through Monte Carlo simulation and streamflow data over a station in Johor, Malaysia. The absolute error is used to test the influence of TL-moments methods on estimated probability distribution functions. From the cases in this study, the results show that TL-moments with four trimmed smallest values from the conceptual sample (TL-moments [4, 0]) of LN3 distribution was the most appropriate in most of the stations of the annual maximum streamflow series in Johor, Malaysia.     

Geochemical evolution of laterites from two areas of the semiarid region in Bahia State, Brazil

Lateritic covers developed during the Pleistocene in two distinct areas (Gentio do Ouro District and Sento Sé) of the State of Bahia, Brazil, have been investigated geochemically. Samples of the bedrock (gabbros, from the Gentio do Ouro District, and silicate facies iron formation and associated iron-rich banded carbonates, from the Sento Sé Area) and the lateritic products (latosols, cuirasses and pisolites) were analyzed for major and selected trace elements (Co, Cu, Cr, Ni, V, Pb, Ba, Au and ree). The purpose of the research was to study the geochemical evolution of the laterites and the relationship of weathering processes to secondary gold mineralization.Four types of element mobilities are recognized, defined by progressive depletion (type A) or enrichment (type C) in the sequence latosol-cuirasse-pisolite or by extreme enrichment (type B) or depletion (type D) in the cuirasse. Cr and V have similar behavior (type C), whatever the type of parent rock: however, when the original rocks are gabbros, Co, Cu and Ni demonstrate behavior A, B and A, respectively. Also Ti has the same type of mobility (type A), whatever the type of parent rock.The concentrations of some residual elements, e.g., Ti, V, Mn, Fe and Au, are inherited from the original rocks, that is, they exhibit higher values in the lateritic materials on parent rocks in which their contents are high.The enrichment of ree in the lateritic materials on iron-rich carbonates is attributed to relatively basic and reducing conditions at depth. This environment allowed the ions of these elements (Ce, Sm, Eu and Yb in the reduced ionic form) to stay in solution along with Fe²⁺. At shallow depht, under oxidizing conditions, the iron oxyhydroxides adsorbed the ree ions. This adsorption was more effective for La, Ce and Yb ions.The ree contents in the lateritic products from gabbros indicate a depletion of hree plus Eu, Nd and Sm are also depleted in cuirasses and Ce is depleted in pisolites. The loss of these ree and the slight concentration of lree in the red latosol of the Gentio do Ouro District are attributed to partial leaching of ree by a relatively acidic solution. The adsorption of ree by iron oxyhydroxides was less intense here than in the weathering of the iron-rich carbonates at Sento Sé Area. It was also more effective for La and Ce (ions). This type of weathering solution may be generated from oxidation of the accessory pyrite present in the gabbros of the Gentio do Ouro District. It may dissolve primary gold which then precipitates on encountering basic conditions at depth.