Geometric constraints on composition of sediment derived from erosional landscapes

Although unroofing sequences are well known in the stratigraphic record, there is no general theory for estimating relevant basic quantities such as the time history of sediment production from a particular unit or the degree of mixing between successive units. Here we investigate the production of sediment from layered source rocks that are milled off by steady-state erosional topography. The shape of the sediment-production function for milling off a thin horizontal layer is given by the derivative of the hypsometric function, in the form of area contained within contours as a function of contour altitude. The time-scale for the production function, the ‘topographic mixing time’, is set by the topographic relief divided by the uplift rate. The production function for a sharp transition from one unit to another is given directly by the hypsometric function. The effects of stratal dip parallel to the mean slope of the erosional topography and finite layer thickness can be accounted for to a first approximation by simple geometric corrections to the mixing time. Finite layer thickness also has the effect of smoothing the production function although most natural hypsometric functions are smooth enough that this effect is relatively weak. The quality of an unroofing sequence can be measured in terms of the ‘sharpness’ of separation of successive peaks in sediment production produced by milling off a sequence of geometrically similar layers. This peak sharpness can be parameterized by a ratio of the interval between successive peaks in sediment production to topographic mixing time. By this measure, the quality of unroofing sequences is controlled by two parameters: the ratio of layer thickness to topographic relief, and the dip angle. The dip angle in concert with topographic mixing exerts a strong control on the degree of signal segregation; in particular, production of cleanly segregated signals for dip angles greater than about 15° requires very high ratios of layer thickness to relief. Hence identification of distinct unroofing sequences may place significant and useful constraints on the attitude and/or thickness of units in the eroding stratigraphy.     

Elevation of the olivine-spinel transition in subducted lithosphere: Seismic evidence

The top of the olivine-spinel phase change in subducted oceanic lithosphere can be located by the travel times of seismic waves which have propagated through the slab. P-wave travel-time residuals from deep earthquakes in the Tonga island are observed at Australian seismic stations are grouped according to the depth of the earthquake. The change in mean residual with a change in earthquake depth is related to the velocity contrast between slab and normal mantle at that depth. The curve mean residual versus earthquake depth displays a region of markedly increased slope between earthquake depths of about 250 and 350 km. The most probable explanation of this observation is an elevation by 100 km of the olivine-spinel phase change within the relatively cooler slab. No evidence was found for vertical displacements within the slab of any deeper phase changes.A temperature contrast between slab and normal mantle of about 1,000°C at 250 km depth is implied. This finding confirms current thermal models for subducted lithosphere but is inconsistent with the global intraplate stress field unless only a few percent of the negative buoyancy force at subduction zones is transmitted to the surface plates.     

Solubility of plutonium(VI) carbonate in saline solutions

Among the plutonium oxidation states found to form in the environment, mobile plutonium(VI) can exist under oxidizing conditions and in waters with high chloride content due to radiolysis effects. We are investigating the solubility and speciation of plutonium(VI) carbonate under conditions relevant to natural waters and brines such as those found near some geologic radioactive waste repositories. The solid Pu(VI) phase PuO₂CO₃(s) was prepared and its solubility was measured in NaCl and NaClO₄ solutions in a CO₂ atmosphere as a function of pH and ionic strength (0.1-5.6 m). The concentration of soluble plutonium in solution was calculated from spectroscopic data and liquid scintillation counting. Spectroscopic measurements also revealed the plutonium oxidation state. The apparent solubility product of PuO₂CO₃(s) was determined at selected electrolyte concentrations to be, log K_s,0 = −13.95 ± 0.07 (0.1 m NaCl), log K_s,0 = −14.07 ± 0.13 (5.6 m NaCl), and log K_s,0 = −15.26 ± 0.11 (5.6 m NaClO₄). Specific ion interaction theory was used to calculate the solubility product at zero ionic strength, .     

The Euro-Atlantic Circulation Response to the Madden-Julian Oscillation Cycle of Tropical Heating: Coupled GCM Intervention Experiments

Abstract

Intervention experiments using the Coupled Forecast System model, version 2 (CFSv2), have been performed in which various Madden-Julian Oscillation (MJO) evolutions were added to the model’s internally generated heating: Slow Repeated Cycles, Slow Single Cycle, Fast Repeated Cycles, and Fast Single Cycle. In each experiment, one of these specified MJO evolutions of tropical diabatic heating was added in multiple ensemble reforecasts of boreal winter (1 November to 31 March for 31 winters: 1980–2010). Since in each experiment, multiple re-forecasts were made with the identical heating evolution added, predictable component analysis is used to identify modes with the highest signal-to-noise ratio. Traditional MJO-phase analysis of total model heating (dominated by internally generated heating) shows that the MJO-related heating structure compares well with heating estimated from observed fast and slow episodes; however, the model heating is larger by a factor of two. The evolution of Euro-Atlantic circulation regimes indicates a clear response due to the added heating, with a robust increase in the frequency of occurrence of the negative phase of the North Atlantic Oscillation (NAO?) after the heating crosses into the Pacific and a somewhat less robust increase in the positive phase of the NAO (NAO+) following Indian Ocean heating. In the Fast Cycle experiments, the model response is somewhat muted compared with the Slow Cycle experiments. The Scandinavian Blocking regime becomes more frequent prior to the NAO? regime. The two leading modes in the predictable component analysis of 300?hPa height (Z300), synoptic scale feedback (DZ300), and planetary wave diabatic heating in all experiments form an oscillatory pair with high statistical significance. The oscillatory pair represents the cyclic response to the particular MJO signal (Fast or Slow, Single, or Repeated Cycles) in each case. The period is about 64 days for the Slow Cycle and 36 days for the Fast Cycle, consistent with the imposed periods. The time series of one of the leading modes of Z300 is highly anti-correlated with the frequency of occurrence of the NAO– in the Repeated Cycle experiments. A clear cycle involving the Z300 and DZ300 leading modes is identified.     

The High-Resolution Coronal Imager (Hi-C)

The High-Resolution Coronal Imager (Hi-C) was flown on a NASA sounding rocket on 11 July 2012. The goal of the Hi-C mission was to obtain high-resolution (≈?0.3?–?0.4′′), high-cadence (≈?5 seconds) images of a solar active region to investigate the dynamics of solar coronal structures at small spatial scales. The instrument consists of a normal-incidence telescope with the optics coated with multilayers to reflect a narrow wavelength range around 19.3 nm (including the Fe xii 19.5-nm spectral line) and a 4096×4096 camera with a plate scale of 0.1′′?pixel^?1. The target of the Hi-C rocket flight was Active Region 11520. Hi-C obtained 37 full-frame images and 86 partial-frame images during the rocket flight. Analysis of the Hi-C data indicates the corona is structured on scales smaller than currently resolved by existing satellite missions.     

A finite element model for the analysis of tailored pulse stimulation of boreholes

A constitutive model is described for the prediction of dynamic crack formation in geological media. The model includes a simple tensile failure criterion for crack formation and a soil plasticity model for both deviatoric and volumetric plasticity. Numerical results are presented which show that the model reproduces the observed dependence of fracture formation on loding rate for dynamic pressure loading of boreholes. The use of the model as a numerical tool for design is demonstrated through two example parameter studies.     

Determination of the properties of Mercury's magnetic field by the MESSENGER mission

The MESSENGER mission to Mercury, to be launched in 2004, will provide an opportunity to characterize Mercury's internal magnetic field during an orbital phase lasting one Earth year. To test the ability to determine the planetary dipole and higher-order moments from measurements by the spacecraft's fluxgate magnetometer, we simulate the observations along the spacecraft trajectory and recover the internal field characteristics from the simulated observations. The magnetic field inside Mercury's magnetosphere is assumed to consist of an intrinsic multipole component and an external contribution due to magnetospheric current systems described by a modified Tsyganenko 96 model. Under the axis-centered-dipole approximation without correction for the external field the moment strength is overestimated by ∼4% for a simulated dipole moment of , and the error depends strongly on the magnitude of the simulated moment, rising as the moment decreases. Correcting for the external field contributions can reduce the error in the dipole term to a lower limit of ∼1-2% without a solar wind monitor. Dipole and quadrupole terms, although highly correlated, are then distinguishable at the level equivalent to an error in the position of an offset dipole of a few tens of kilometers. Knowledge of the external magnetic field is therefore the primary limiting factor in extracting reliable knowledge of the structure of Mercury's magnetic field from the MESSENGER observations.     

Local hydraulic gradient estimator analysis of long-term monitoring networks

Three measurements of head at unique locations form a three-point estimator of the local magnitude and orientation of the hydraulic gradient. The relative head measurement error (RHME) is defined here as the measurement error normalized by the head drop across the three-point estimator. Monte Carlo simulation results show that estimators with base to height ratios between 0.5 and 5.0 and that are large enough to keep the RHME below 0.05 create the most accurate gradient estimates and provide criteria for identifying good estimators. These criteria are applied to an example ground water monitoring network design problem in the Culebra dolomite near the Waste Isolation Pilot Plant repository to both analyze temporal changes and modify and expand the current monitoring network. Limiting the three-point estimators to those that meet the shape and RHME criteria reduces the number of possible estimators by >50% and leads to approximately 1 order of magnitude decrease in the average estimated magnitude of the gradient relative to using all estimators. Application of these criteria also reduces the variability in estimated gradient magnitude and orientation between the two time periods of measurements. Redundant wells in the network are identified by removing each existing well in turn and determining which removals yield the smallest decrease in the number of acceptable estimators. Optimal new well locations are identified by mapping the increase in total number of acceptable estimators for a single new well placed in the study domain.