Rift-zone magmatism: Petrology of basaltic rocks transitional from CFB to MORB,southeastern Brazil margin

Compositions of basaltic samples from the southeastern Brazil passive margin (18°–24° S) depict the change from continental to oceanic lithosphere during the opening of the South Atlantic Ocean. Samples studied range from 138 to 105 m.y. old and are from 12 Petrobrás drill cores recovered from the coastline to about 150 km offshore in the Espirito Santo, Campos, and Santos basins. Compositions vary, ranging, for example, from 49–54 wt.% SiO₂, 0.5–3.0 wt.% TiO₂, 0.6–5.0 FeO^*/MgO, and 1-6 La/ Yb_(n), but can be grouped: (i) basalts enriched in incompatible elements, such as K (some K₂O>2.0 wt.%), Rb (>18 ppm), Zr (>120 ppm), and LREE (some FeO^* 16 wt.%; most with SiO₂ 51–54 wt.%), and resembling Serra Geral continental flood basalts (SG-CFB) of southern Brazil; (ii) basalts less enriched, or transitional, in incompatible elements, having K₂O <0.40 wt.% and flat REE patterns, and resemble N. Atlantic diabases and FAMOUS basalts; and (iii) one depleted sample, Ce/Yb_(n)=0.7, where Ce_(n)=4. Expressed in oceanic-basalt terminology and Zr-Nb-Y abundances, enriched samples are P- and T-type MORB (e.g., Zr/Nb 4–25), transitional samples are T-type (Zr/ Nb 8–27), and the depleted sample is N-type MORB (Zr/Nb>30).Trace-element ratios (e.g., Zr/Nb, Zr/Y) link the Brazil margin basalts to a heterogeneous mantle (attributed to metasomatic veining) of variably proportioned mixtures of depleted-mantle (N-MORB) and plume (P-MORB, e.g., Tristan hotspot) materials. The various compositions therefore reflect, in part, different zones of melting during the separation of Gondwanaland, where gradual decompression during rifting enabled concurrent melting of upper, more depleted (non- or sparsely-veined) mantle and enriched (densely-veined) mantle. Within the time represented, melting produced enriched, transitional, and depleted magmas that were emplaced subaerially, hypabyssally, and subaqueously; they mark the transition from CFB before rifting and separation (from deeper, enriched mantle) to N-MORB in the S. Atlantic afterwards (from non- or sparsely-veined upper mantle). While P-type mantle components account for the enriched compositions of some basalts (Zr/Nb<8), continental crust is largely responsible for that of others (e.g., Ti/Zr 40–57; La/Yb_(n) 5–6, and ¹⁸O+12.2 in one sample). Some may be contaminated expressions of otherwise T-type basalts free of crustal components. This study identifies CFB to be from sources similar to those for T- and P-type oceanic rocks, where individual CFB magmas may or may not have acquired crustal signatures.     

Assessment of Potential Alkali Aggregate Reactivity for Siliceous and Carbonate Aggregates: A Case Study

Alkali-aggregate reactivity (AAR) involves a reaction between the pore solution of concrete and certain minerals found in some aggregates. To assess the potential AAR various physical and chemical tests are available and extensively used. The petrographic examination is the initial assessment that decides the further investigation for potential reactivity of an aggregate. A chemical approach is another option to assess the aggregate for potential AAR. The accelerated mortar bar method and concrete prism tests are other very important tests for determination of potential AAR of aggregates samples. However, a combination of the results of all the techniques provides most reliable results for potential AAR in aggregates. Moreover, each test represents the stepwise investigation and provides the decision for the test of next approach. Petrographic examination and chemical test methods are the quick decision-making methods for the estimation of potential AAR. In some cases, by these two methods, the aggregate can be selected and rejected confidently. However, for critical values or doubtful aggregates, further tests are necessary to develop a higher confidence level of the results. The present study comprises of the assessment of the alkali-reactivity of siliceous and carbonate aggregates using petrographic and chemical approaches. X-ray diffraction analysis was used as a complementary method to the petrographic evaluation. Moreover, under chemical approach, two separate test methods were used for siliceous and carbonate aggregates. The study also included a comparison between the petrographic examination and chemical analysis for the same aggregate samples and found significant results.     

An Evaluation of the Effects of Primary and Cross‐Contamination during the Preparation of Rock Powders for Chemical Determinations

Quartz crystals from the Batatal site, Minas Gerais, southern Brazil, were used to determine quantitatively primary contamination when submitting the samples to milling processes. Crushing devices used were a primary steel jaw crusher (br1), a secondary tungsten carbide (WC) crusher (br2) and a hydraulic press with stainless steel plates (pr). Fragments with suitable sizes were then ground in different Fritsch planetary mills, equipped with agate, WC and chromium‐steel rings for 7, 4 and 3 min, respectively. Solutions of the powders were analysed initially with the TotalQuant^? method in a quadrupole ICP‐MS instrument, providing semi‐quantitative results for seventy‐five elements. Contamination from crushers and mills was visible in major and minor elements such as Fe, Mn and Ti, and noticeable in trace elements such as Cr, Co, Ni, Cu and also V, Zr, Sc; significant contamination was observed from W, Mo, Co, Ta and Nb (mainly by use of the WC devices). Little or no contamination was observed for Pb, REE, Sr and Rb, elements that are important in routine isotopic determinations. Cross‐contamination was tested by grinding either a granite or a basalt sample, followed by conventional cleaning with mica‐free quartz sand, before the working quartz powder was prepared.     

The stable isotopic composition of coral skeletons: control by environmental variables

The reef corals Pocillopora damicornis and Montipora verrucosa were cultured under various controlled temperature and light conditions. The corals were analyzed for growth rate, tissue pigment content and skeletal ¹³C and ¹⁸O. Coral skeletal δ¹³C values varied with light dose and correlated with changes in zooxanthellar pigment. The δ¹³C values of skeletal aragonite seem to be modified by oxidation of photosynthetically produced organic matter.Functionally significant relationships between coral skeletal δ¹⁸O values and temperature have been determined. The temperature coefficients of the δ¹⁸O values [?4.4°C (%.)^?1] are similar to the first order coefficient in the equilibrium paleotemperature equation, but the δ¹⁸O values have taxonomically consistent offsets from equilibrium. The offsets may be attributed to the coral metabolism with slight but statistically significant differences between the two genera. Environmental and metabolic variables other than temperature have little or no effect on skeletal δ¹⁸O.     

Establishing the wave climate influence on the morphodynamics of a coastal lagoon inlet

The morphologic changes in estuaries and coastal lagoons are very complex and constitute a challenging task in coastal research. The bathymetric changes result from the combined action of tides, waves, rivers discharge and wind stress in the area of interest. Additionally, an accurate knowledge of the sediment transport is essential to achieve a good morphological characterization. This work establishes the influence of the wave climate on the morphodynamics of the Ria de Aveiro lagoon inlet by analysing the numerical results of the morphodynamic modelling system MORSYS2D. The numerical simulations considered a realistic coupled forcing of tidal currents and waves. The computed sediment fluxes and bathymetric changes are analysed and compared with the erosion and accretion trends obtained from the numerical simulations forced only by tidal currents, in order to establish the wave climate influence. The final bathymetry and the corresponding changes are compared with bathymetric data collected through surveys. It is concluded that: (a) the morphodynamics of the study area is dominated by the wave regime in the lagoon inlet and nearshore areas, while in the inner areas is tidally dominated; and (b) the inclusion of the wave regime forcing constitutes an improvement in order to accurately reproduce the local morphodynamics.     

Tintinnids and Other Microplankton from the Greenland Sea: Abundance and Distribution in the Marginal Ice Zone (MayJune 1989)

Abstract. Microplankton (silicoflagellates, dinoflagellates, tintinnids, pteropods, crustaceans, and fecal pellets) was analysed in 71 0–95 m samples from the Greenland Sea collected from May to June 1989. Abundances were clearly associated with the ice edge, highest concentrations occurring in ice-free waters. The 15 to 30 m stratum was generally richer in microplankton than deeper waters, with the exception of microcrustaceans, which often peaked below 30 m. Six tintinnid species were identified. The mean size of the tintinnid Parafavella denticulata from the Greenland Sea was consistently greater than that of Barents Sea specimens. It is suggested that colder waters and scarcer food are responsible for these morphometric differences.     

Robustness of GNSS integer ambiguity resolution in the presence of atmospheric biases

Both the underlying model strength and biases are two crucial factors for successful integer GNSS ambiguity resolution (AR) in real applications. In some cases, the biases can be adequately parameterized and an unbiased model can be formulated. However, such parameterization will, as trade-off, reduce the model strength as compared to the model in which the biases are ignored. The AR performance with the biased model may therefore be better than with the unbiased model, if the biases are sufficiently small. This would allow for faster AR using the biased model, after which the unbiased model can be used to estimate the remaining unknown parameters. We assess the bias-affected AR performance in the presence of tropospheric and ionospheric biases and compare it with the unbiased case. As a result, the maximum allowable biases are identified for different situations where CORS, static and kinematic baseline models are considered with different model settings. Depending on the size of the maximum allowable bias, a user may decide to use the biased model for AR or to use the unbiased model both for AR and estimating the other unknown parameters.     

Medical imaging: examples of clinical applications

Clinical routine is currently producing a multitude of diagnostic digital images but only a few are used in therapy planning and treatment. Medical imaging is involved in both diagnosis and therapy. Using a computer, existing 2D images can be transformed into interactive 3D volumes and results from different modalities can be merged. Furthermore, it is possible to calculate functional areas that were not visible in the primary images. This paper presents examples of clinical applications that are integrated into clinical routine and are based on medical imaging fundamentals. In liver surgery, the importance of virtual planning is increasing because surgery is still the only possible curative procedure. Visualisation and analysis of heart defects are also gaining in significance due to improved surgery techniques. Finally, an outlook is provided on future developments in medical imaging using navigation to support the surgeon's work. The paper intends to give an impression of the wide range of medical imaging that goes beyond the mere calculation of medical images.     

From noise correlation to resonant ultrasound spectroscopy in rock acoustics

This article introduces an alternative experimental procedure for measuring the elastic properties of a solid material at laboratory scale, using both the principles of passive seismic interferometry and resonance ultrasound spectroscopy. We generate noise into the studied sample with a pneumatic air blow gun, and we cross‐correlate the signals recorded with two passive piezoelectric sensors put in soft contact with the sample surface. Resonance phenomena are induced in the sample, but in contrast with conventional resonance ultrasound spectroscopy experiments, we have no control over the injected frequencies that are sent all together within the noise spectrum. The spectrum of the correlogram is a good approximation of the resonance spectrum of the vibrating sample and can be inverted in terms of the elastic moduli of the constituent material of the sample. The experimental procedure is validated on samples made of standard materials (here, aluminium and Plexiglas) by consistently comparing the inverted elastic velocities with the velocities independently measured with the conventional technique of ultrasonic pulse transmission. Moreover, we got similar positive results on dry rock samples, such as Vilhonneur limestone. These encouraging preliminary results open up promising prospects for monitoring fluid substitution in rock samples using the technique described in this paper.