Increased heat fluxes near a forest edge

Summary ?Observations of sensible and latent heat flux above forest downwind of a forest edge show these fluxes to be larger than the available energy over the forest. The enhancement averages to 56 W m⁻², or 16% of the net radiation, at fetches less than 400 m, equivalent to fetch to height ratios less than 15. The enhancement of turbulent energy fluxes is explained by advection and increases with the difference in temperature and humidity of the air over the upwind area as compared to the forest. The relatively high temperature and humidity of the upwind air are not caused by high surface heat fluxes, but are explained by the relatively low aerodynamic roughness of the upwind surface. Although the heat fluxes over forest are enhanced, the momentum fluxes are almost adjusted to the underlying forest. The different behaviour of heat and momentum fluxes is explained by absorption of momentum by pressure gradients near the forest edge. It is concluded that fetch requirements to obtain accurate surface fluxes from atmospheric observations need to be more stringent for scalar fluxes as compared to momentum fluxes. Received November 23, 2001; accepted May 13, 2002     

Crustal thickness, discontinuity depth, and upper mantle structure beneath southern Africa: constraints from body wave conversions

The technique of receiver function analysis is applied to the study of crustal and upper mantle structures beneath the Kaapvaal craton in southern Africa and its surroundings. Seismic data were recorded by the seismic array of 82 sites deployed from April 1997 to April 1999 across southern Africa, as well as a dense array of 32 sites near Kimberley, in operation from December 1998 to June 1999. Arrival times for phases converted at the Moho are used to determine crustal thickness. The Moho depth in the south–western section of the craton was found to vary between 37 and 40 km, except for one station that recorded a depth of 43 km (SA23). Farther north along the western block of the craton (into Botswana) the depth increases up to 43 km. The depth increases even further in the north–eastern section of the craton, where results vary from 40 to 52 km. Just north of the Kaapvaal craton, in the neighbouring Zimbabwe craton, the crustal thickness drops significantly. The results obtained there varied from 36 to 40 km. For the Kimberley area, using the dense array, the Moho depth was found to be 37.3 km. Arrivals of the Ps and Ppps phases were used to determine the Poisson’s ratio in the region. This was found to be 0.26±0.01. Arrivals of phases from the 410 and 660 km mantle discontinuities are used to interpret the relative positions of these discontinuities, as well as for comparison of mantle temperatures and seismic velocities in the region with global averages. In the Kimberley area the 410 and 660 km discontinuities were found at their expected depth, implying that mantle temperatures in the region are close to the global average. The seismic velocities above the ‘410’ were found up to 5% faster than the averages from the global iasp91 model, which is fast even by Precambrian standards. In other sections of the Kaapvaal craton, the velocities are also faster than global averages, but not as fast as beneath Kimberley. In these sections, the ‘410’ is also slightly elevated, while the ‘660’ is depressed, which implies a slightly lower mantle temperature relative to the global average. Beneath the Kaapvaal craton we find evidence suggesting the presence of a zone with a reduced wavespeed gradient at an upper bound of approximately 300 km, which may mark the lower chemical boundary of the craton.     

On the role of subducting oceanic plateaus in the development of shallow flat subduction

Oceanic plateaus, aseismic ridges or seamount chains all have a thickened crust and their subduction has been proposed as a possible mechanism to explain the occurrence of flat subduction and related absence of arc magmatism below Peru, Central Chile and at the Nankai Trough (Japan). Their extra compositional buoyancy could prohibit the slab from sinking into the mantle. With a numerical thermochemical convection model, we simulated the subduction of an oceanic lithosphere that contains an oceanic crustal plateau of 18-km thickness. With a systematic variation, we examined the required physical parameters to obtain shallow flat subduction. Metastability of the basaltic crust in the eclogite stability field is of crucial importance for the slab to remain buoyant throughout the subduction process. In a 44-Ma-old subducting plate, basalt must be able to survive a temperature of 600–700 °C to keep the plate buoyant sufficiently long to cause a flat-slab segment. We found that the maximum yield stress in the slab must be limited to about 600 MPa to allow for the necessary bending to the horizontal. Young slabs show flat subduction for larger parameter ranges than old slabs, since they are less gravitationally unstable and show less resistance against bending. Hydrous weakening of the mantle wedge area and lowermost continent are required to allow for the necessary deformation of a change in subduction style from steep to flat. The maximum flat slab extent is about 300 km, which is sufficient to explain the observed shallow flat subduction near the Nankai Trough (Japan). However, additional mechanisms, such as active overthrusting by an overriding continental plate, need to be invoked to explain the flat-slab segments up to 500 km long below Peru and Central Chile.     

National sovereignty & transboundary protected areas in Southern Africa

The notion that Transboundary Protected Areas (TBPAs) will act as `Peace Parks' has become an important argument in their promotion in post-Apartheid Southern Africa. This `Peace Parks Concept' is implicitly based upon the assumption that national sovereignty will not become a constraining factor in the creation and management of TBPAs. However, this assumption is problematic. TBPAs introduce various changes in the landscape with consequences for the ways in which a state can exercise its sovereignty over its borderland and citizens. This situation might evoke state action that could endanger the various environmental, socio-economic and political objectives of TBPAs. A state's behaviour with regard to TBPAs is not just informed by its interests in TBPAs, but also by its strategic and other interests in the wider borderland area. These are not necessarily compatible with the environmental and economic objectives of TBPAs. The ways in which these interests are mediated are highly complex and non-linear. Because of the inter-dependency that TBPAs create, the extent to which a state can pursue certain interests by means of TBPAs will be (partially) constrained by the wishes of the other states involved. In addition, power has to be shared with a wide range of non-state actors. The operation of sovereignty in TBPAs is therefore highly unpredictable and cannot be captured in static zero-sum terms. Actor Network Theory is identified as a possible starting-point to unravel and evaluate these complex political processes in TBPAs and their subsequent outcomes for state sovereignty.     

Paleolimnological evidence for increased landslide activity due to forest clearing and land-use since 3600 cal BP in the western Swiss Alps

Schwarzsee is located in the western Swiss Alps, in a region that has been affected by numerous landslides during the Holocene, as evidenced by geological surveys. Lacustrine sediments were cored to a depth of 13 m. The vegetation history of the lake's catchment was reconstructed and investigated to identify possible impacts on slope stability. The pollen analyses record development of forest cover during the middle and late Holocene, and provide strong evidence for regional anthropogenic influence such as forest clearing and agricultural activity. Vegetation change is characterized by continuous landscape denudation that begins at ca. 4300 cal. yrs BP, with five distinct pulses of increased deforestation, at 3650, 2700, 1500, 900, and 450 cal. yrs BP. Each pulse can be attributed to increased human impact, recorded by the appearance or increase of specific anthropogenic indicator plant taxa. These periods of intensified deforestation also appear to be correlated with increased landslide activity in the lake's catchment and increased turbidite frequency in the sediment record. Therefore, this study gives new evidence for a strong influence of vegetation changes on slope stability during the middle and late Holocene in the western Swiss Alps, and may be used as a case study for anthropogenically induced landslide activity.     

Rapid and rhythmic ice sheet fluctuations in western Scandinavia 15-40 Kya–a review

The onshore record of Middle to Late Weichselian sediments and glacial history in Norway indicates a succession of four major ice advances alternating with rapid, considerable ice recessions and interstadial conditions. During all the glacial advances the ice sheet expanded from onshore/inland positions to the shelf areas. The basis for visualizing these variations in glaciation curves constructed along nine transects from inland to shelf, and for interpretation of the palaeoclimatic history, is the regional Quaternary stratigraphy, more than 300 datings, fossil content and some palaeomagnetic data. The methods applied in recent years for AMS radiocarbon dating of glacial sediments with low organic carbon content have given promising results with respect to accuracy and precision, and the results of such datings were an important tool for our reconstructions and for timing of the ice oscillations. The rapid and rhythmic ice fluctuations, as reconstructed in our new model, have been fairly synchronous in most parts of Norway. Ice advances commenced and culminated at 40, 30-28, 24-21 and 18-15 (¹⁴C) Kya. We describe three intervening interstadials from inland sites: Hattfjelldal I, Hattfjelldal II and Trofors. Our stratigraphical record also includes many indications of high, pre-Holocene, relative sea levels, suggesting a considerable glacioisostatic depression of western Scandinavia during the interstadials. In our glaciation model we suggest that, in addition to precipitation, the mountainous fjord and valley topography, glacial isostasy and relative sea level changes were probably more important for the size of the glacial fluctuations than were air temperature changes.     

Isotope (O-Sr-Nd-Pb) and Fluid Inclusion Distributions in the CCSD Main Hole

1. Introduction The main-hole of the Chinese Continental Scientific Drilling Project (CCSD) in Donghai of the Dabie-Sulu UHP metamorphic belt in East China has reached its final depth of 5118 m in March 2005. As shown in Fig.     

Evaluation of CADISSE a regional storage capacity model

In this paper the validity of CADISSE, a regional storage capacity model developed to assess the sensitivity of catchment hydrology to climate variability, is examined. In CADISSE, catchment discharge sensitivity is expressed as the ratio of present maximum reservoir storage to catchment storage capacity. Present maximum storage should be interpreted as the maximum amount of water stored in a catchment at present. Catchment storage capacity is defined as the absolute amount of water that can be stored, given the catchment's dimensions and lithological characteristics. With CADISSE, catchment sensitivity can be quantified regionally using limited discharge data and topographic information. Furthermore, storage capacities can be assessed. CADISSE was successfully applied to 15 catchments in the Upper Loire Basin. However, successful application does not necessarily mean that the variables (present maximum storage and storage capacity) represent real world values. Therefore, a two‐step evaluation procedure is presented in this paper. To evaluate CADISSE, (1) the accurate assessment of regionally determined storage capacity, and (2) the importance of present maximum storage for catchment discharge sensitivity is examined with a daily discharge model by comparing observed and simulated catchment storage behaviour for dry and wet periods. The evaluation was carried out using the probability distributed daily discharge model, PDM, and a weather generator for three catchments with different storage capacities and storage behaviour. Results indicate that catchment storage capacity can be correctly quantified with CADISSE and that differences in storage behaviour are indeed important for analyses of catchment sensitivity. Hence, CADISSE has great potential as it can be used to identify flood‐ and drought‐prone catchments under present and future conditions. Copyright © 1999 John Wiley & Sons, Ltd.     

Disaggregating and mapping crop statistics using hypertemporal remote sensing

Governments compile their agricultural statistics in tabular form by administrative area, which gives no clue to the exact locations where specific crops are actually grown. Such data are poorly suited for early warning and assessment of crop production. 10-Daily satellite image time series of Andalucia, Spain, acquired since 1998 by the SPOT Vegetation Instrument in combination with reported crop area statistics were used to produce the required crop maps. Firstly, the 10-daily (1998–2006) 1-km resolution SPOT-Vegetation NDVI-images were used to stratify the study area in 45 map units through an iterative unsupervised classification process. Each unit represents an NDVI-profile showing changes in vegetation greenness over time which is assumed to relate to the types of land cover and land use present. Secondly, the areas of NDVI-units and the reported cropped areas by municipality were used to disaggregate the crop statistics. Adjusted R-squares were 98.8% for rainfed wheat, 97.5% for rainfed sunflower, and 76.5% for barley. Relating statistical data on areas cropped by municipality with the NDVI-based unit map showed that the selected crops were significantly related to specific NDVI-based map units. Other NDVI-profiles did not relate to the studied crops and represented other types of land use or land cover. The results were validated by using primary field data. These data were collected by the Spanish government from 2001 to 2005 through grid sampling within agricultural areas; each grid (block) contains three 700 m × 700 m segments. The validation showed 68%, 31% and 23% variability explained (adjusted R-squares) between the three produced maps and the thousands of segment data. Mainly variability within the delineated NDVI-units caused relatively low values; the units are internally heterogeneous. Variability between units is properly captured. The maps must accordingly be considered “small scale maps”. These maps can be used to monitor crop performance of specific cropped areas because of using hypertemporal images. Early warning thus becomes more location and crop specific because of using hypertemporal remote sensing.