Siltation by sediment-induced density currents

This paper describes the results of numerical experiments with a three-dimensional hydrodynamic and mud transport model in which sediment–fluid interaction is taken into account through the effects of hindered settling, buoyancy destruction in the turbulence k– model and sediment-induced barocline pressure gradients in the momentum equations. The model was applied to a schematic case representing a coastal area with a tidal river, navigation channel and harbour basin, and a real-world case, viz. Rotterdam harbour area in The Netherlands. The results show that the sediment transport into the harbour area, and subsequent siltation rates, increase by a factor 3 to 5 due to the sediment–fluid interaction. It is shown that the larger contribution stems from an increase in vertical gradients in suspended sediment.Responsible Editor: Jens Kappenberg     

Deep-sea fan pinch-out geometries and their relationship to fan architecture,Tanqua Karoo basin (South Africa)

Exceptional exposures of Permian basin floor fans (fans 3, 4) and a slope fan (fan 5) in the Tanqua Karoo foreland basin of South Africa have enabled an investigation of the relation between the pinch-out geometries and fan architecture. The pinch-out geometry of fan 3 is characterized by the down dip transition from thin to medium bedded sheet deposits to pinch-out fingers, which are overlain by younger prograding sheet deposits. This geometry reflects the progradational stacking pattern of the fan. In contrast, the fan 4 pinch-out fingers consist of stacked channel fills in the same conduit. This pinch-out configuration relates to the dominant aggradational style observed on the mid and distal parts of fan 4. Fan 5 represents a slope fan comprising an axial channel conduit, which branches down slope into three distributary channels. The distal fan is characterized by larger channel fills, which may represent bypass channels to other basin floor fans. The very thick-bedded nature of the youngest channel fill unit suggests early bypass followed by retrogradation as indicated by the presence of thinner bedded heterolithic channel fill deposits along the axial conduit. Although some of the massive pinch-out channels exhibit basal scour, their depositional morphology suggests that they mainly originated due to the infill of subtle topographic depressions by low concentration turbidity currents. Instead of describing these features as channel fills, the use of the term pinch-out fingers is preferred.     

Strong magnetic linear dichroism in Fe <Emphasis Type="Italic">L</Emphasis><Subscript>23</Subscript> and O <Emphasis Type="Italic">K</Emphasis> electron energy-loss near-edge spectra of antiferromagnetic hematite α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

We report strong magnetic linear dichroism (MLD) at the Fe L₂₃ and O K edges of the antiferromagnetic compound hematite -Fe₂ O₃ in high-resolution orientation- and temperature-dependent electron energy-loss spectroscopy (EELS). Large intensity differences of corresponding spectral features are observed when the Fe L₂₃ and O K edges are measured with momentum transfer either parallel or perpendicular to the magnetization. The resultant difference spectra for the Fe L₂₃ edges is consistent with the MLD observed in X-ray absorption spectroscopy. For the first time we have observed MLD at the O K edge, where the magnetic origin of this dichroism is demonstrated by temperature-dependent investigations across the Morin transition temperature T_M= 263 K, at which the Fe electron spins, i.e. the magnetic moments, rotate by 90°. The O K edge MLD is interpreted in terms of superexchange between the spins of the Fe 3d and O 2p electrons through overlapping Fe 3d and O 2p orbitals. The experiments were performed in a transmission electron microscope (TEM), yielding information about the anisotropic electronic structure at nanoscale spatial resolution when operated with a focused electron probe. The effects of MLD at the Fe L₂₃ edges on the determination of Fe³⁺/Fe in hematite at submicrometre scale using different independent quantification methods are discussed.     

On the formation of continental silicic melts in thermochemical mantle convection models: implications for early Earth

Seafloor magnetotelluric (MT) data were collected at seven sites across the Hawaiian hot spot swell, spread approximately evenly between 120 and 800 km southwest of the Hawaiian-Emperor island chain. All data are consistent with an electrical strike direction of 300°, aligned along the seamount chain, and are well fit using two-dimensional (2D) inversion. The major features of the 2D electrical model are a resistive lithosphere underlain by a conductive lower mantle, and a narrow, conductive, ‘plume’ connecting the surface of the islands to the lower mantle. This plume is required; without it the swell bathymetry produces a large divergence of the along-strike and across-strike components of the MT fields, which is not seen in the data. The plume radius appears to be less than 100 km, and its resistivity of around 10 Ωm, extending to a depth of 150 km, is consistent with a bulk melt fraction of 5–10%.A seismic low velocity region (LVR) observed by Laske et al. [Laske, G., Phipp Morgan, J., Orcutt, J.A., 1999. First results from the Hawaiian SWELL experiment, Geophys. Res. Lett. 26, 3397–3400] at depths centered around 60 km and extending 300 km from the islands is not reflected in our inverse model, which extends high lithospheric resistivities to the edge of the conductive plume. Forward modeling shows that resistivities in the seismic LVR can be lowered at most to 30 Ωm, suggesting a maximum of 1% connected melt and probably less. However, a model of hot subsolidus lithosphere of 10² Ωm (1450–1500 °C) within the seismic LVR increasing to an off-swell resistivity of >10³ Ωm (<1300 °C) fits the MT data adequately and is also consistent with the 5% drop in seismic velocities within the LVR. This suggests a ‘hot, dry lithosphere’ model of thermal rejuvination, or possibly underplated lithosphere depleted in volatiles due to melt extraction, either of which is derived from a relatively narrow mantle plume source of about 100 km radius. A simple thermal buoyancy calculation shows that the temperature structure implied by the electrical and seismic measurements is in quantitative agreement with the swell bathymetry.     

Sonic anemometers in aeolian sediment transport research

Fast-response wind and turbulence instruments, including sonic anemometers, are used more and more in aeolian sediment transport research. These instruments give information on mean wind, but also on fluctuations and turbulent statistics, such as the uw covariance, which is a direct measure of Reynolds' stress (RS) and friction velocity. This paper discusses the interpretation of sonic anemometer data, the transformations needed to get proper results and turbulence spectra, and how they are influenced by instrument size, sampling frequency, and measurement height.Turbulence spectra characterize how much the different frequencies in the turbulent signals contribute to the variance of wind speed, or to the covariance of horizontal and vertical wind speed. They are important in determining the measurement strategy when working with fast-response instruments, such as sonic anemometers, and are useful for interpreting the measurement results. Choices on the type of sonic anemometer, observation height, sampling period, sampling frequency, and filtering can be made on the basis of expected high and low-frequency losses in turbulent signals, which are affected by those variables, as well as wind speed and atmospheric stability.Friction velocity and RS, important variables in aeolian sediment transport research, are very sensitive to tilt or slope errors. During a field experiment, the slope sensitivity of the RS was established as 9% per degree of slope, which is 1.5 times the value reported in literature on the basis of theoretical considerations. An important reason for the difference probably is the large influence of streamline curvature on turbulence statistics and thereby on the slope sensitivity of the RS. An error of 9% per degree of slope in the RS will translate into an error of approximately 4% per degree of slope in the calculated friction velocity.Space–time correlation of the horizontal wind speed is much larger than that of the vertical wind speed and the instantaneous RS. This largely explains why, in previous studies, a poor correlation was found between instantaneous RS measured at 3 m height and saltation flux near the surface, whereas the correlation between wind speed at some height and saltation flux was much better. Therefore, the poor correlation between RS away from the surface and saltation flux does not contradict that saltation flux is caused by RS.     

Reduction of reflections from above surface objects in GPR data

During a ground-penetrating radar (GPR) survey, special attention must be paid to objects located above the earth's surface. Due to the low-loss character of electromagnetic propagation in air and high velocity, above-surface reflections or diffractions can overwhelm subsurface events, making the interpretation a difficult task. The relative sensitivity of reflections and diffractions originating from above-surface objects is a function of the antenna radiation characteristics, the lateral and vertical dimensions of the objects and their position with respect to the antennas. The largest amplitude reflections and diffractions are expected when the polarization of the electric field is parallel to the long-axis of the object. Near the surface in the E-plane, the electric field is vertically polarized and has a larger amplitude than the horizontally polarized electric field in the H-plane. Numerical modeling of reflections from three above surface objects (a vertical plane and elongated horizontal and vertical objects) demonstrate that the largest amplitude difference occurs when an elongated vertical object is present in the E- or H-plane. The calculated reflection from the elongated vertical object present in the E-plane was 21 times larger than when it was present in the H-plane. In 60-m long field data sets, reflections from interfering trees present in the E-plane were at several positions >15 times larger and on average 6 times larger than when the trees were present in the H-plane. These large amplitude differences indicate that appropriate orientation of the antennas can be used to minimize the effects of above-surface reflections and diffractions.     

New constraints on the sources and behavior of neodymium and hafnium in seawater from Pacific Ocean ferromanganese crusts

The behavior of dissolved Hf in the marine environment is not well understood due to the lack of direct seawater measurements of Hf isotopes and the limited number of Hf isotope time-series obtained from ferromanganese crusts. In order to place better constraints on input sources and develop further applications, a combined Nd-Hf isotope time-series study of five Pacific ferromanganese crusts was carried out. The samples cover the past 38 Myr and their locations range from sites at the margin of the ocean to remote areas, sites from previously unstudied North and South Pacific areas, and water depths corresponding to deep and bottom waters.For most of the samples a broad coupling of Nd and Hf isotopes is observed. In the Equatorial Pacific ε_Nd and ε_Hf both decrease with water depth. Similarly, ε_Nd and ε_Hf both increase from the South to the North Pacific. These data indicate that the Hf isotopic composition is, in general terms, a suitable tracer for ocean circulation, since inflow and progressive admixture of bottom water is clearly identifiable.The time-series data indicate that inputs and outputs have been balanced throughout much of the late Cenozoic. A simple box model can constrain the relative importance of potential input sources to the North Pacific. Assuming steady state, the model implies significant contributions of radiogenic Nd and Hf from young circum-Pacific arcs and a subordinate role of dust inputs from the Asian continent for the dissolved Nd and Hf budget of the North Pacific.Some changes in ocean circulation that are clearly recognizable in Nd isotopes do not appear to be reflected by Hf isotopic compositions. At two locations within the Pacific Ocean a decoupling of Nd and Hf isotopes is found, indicating limited potential for Hf isotopes as a stand-alone oceanographic tracer and providing evidence of additional local processes that govern the Hf isotopic composition of deep water masses. In the case of the Southwest Pacific there is evidence that decoupling may have been the result of changes in weathering style related to the buildup of Antarctic glaciation.     

Rapid assessment of field erosion and sediment transport pathways in cultivated catchments after heavy rainfall events

This paper explores a scale‐adapted erosion mapping method which aims at a rapid assessment of field erosion and sediment transport pathways in catchments up to several square kilometres and compares the results with the output of a well‐known erosion model (LISEM). The mapping method is based on an event‐defined classification scheme of erosion intensity (zero, weak, moderate and strong) that is applied to arable fields, in combination with incision measurements of erosion features for each erosion intensity class on a small sample of fields. Sediment deposition is classified on the basis of quantity indicators and abundance. In addition, relevant conditions and erosion factors are determined for each field. The method was applied to an agricultural catchment (4·2 km²) in the Sundgau (Alsace), after a short but violent thunderstorm in May 2001, to illustrate its potential use and its limitations. The rainfall event led to strong erosion on the arable fields and a muddy flow that caused significant damage in the built‐up area. On the basis of the analyses of the incision measurements in combination with the mapping of erosion intensity classes, total erosion for the catchment was estimated as 15 000 t (an average of about 36 t[sol ]ha). Sediment deposition was found to occur in three major locations: (1) in thalwegs at the interface between maize and downslope winter wheat fields, (2) in downslope headlands where the flow direction suddenly changed due to oriented tillage structures in the perpendicular direction, and (3) the lowest corners of fields which collect all the runoff from the field. Preliminary data analyses suggest that erosion intensity is related to field size and[sol ]or tillage direction and to slope morphology. Model output (LISEM) appeared to depend more strongly on slope gradient than the results obtained with the mapping method. The method yields a database, which can be used as a foundation for conservation strategies in small regions with similar land use and geomorphology. The mapping and modelling methods are compared, and their complementary aspects are highlighted. Copyright © 2005 John Wiley & Sons, Ltd.