Provenance,weathering, and paleoenvironment of the Upper Cretaceous Duwi black shales,Aswan Governorate,Egypt

The mineralogy and geochemistry of the Upper Cretaceous Duwi black shales of Nile Valley district, Aswan Governorate, Egypt, have been investigated to identify the source rock characteristics, paleoweathering, and paleoenvironment of the source area. The Duwi Formation consists mainly of phosphorite and black shales and is subdivided into three members. The lower and upper members composed mainly of phosphorite beds intercalated with thin lenses of gray shales, while the middle member is mainly composed of gray shale, cracked, and filled with gypsum. Mineralogically, the Duwi black shales consist mainly of smectite and kaolinite. The non-clay minerals are dominated by quartz, calcite, phosphate, dolomite, feldspar, with little gypsum, anhydrite, iron oxides, and pyrite. Based on the CIA, PIA, and CIW values (average?=?84, 94, 95, respectively), it can be concluded that the litho-components of the studied shales were subjected to intense chemical weathering and reflect warm/humid climatic conditions in the depositional basin. The provenance discrimination diagram indicates that the nature of the source rocks probably was mainly intermediate and mafic igneous sources with subordinate recycled sedimentary rocks (Nubia Formation). Geochemical characteristics indicate that the Duwi black shales in Nile Valley district were deposited under anoxic reducing marine environments.     

Bristen granite: a highly differentiated,fluorite-bearing A-type granite from the Aar massif,Central Alps,Switzerland

Bristen granite is a body of fine-grained leucogranite occurring in the Gotthard rail base tunnel in the Central Alps. During construction of the tunnel, Bristen granite (Brgr) has been drilled along a 600 m long section. The aplite-granite belongs to the suite of Variscan granitoid intrusions of the Aar massif and contains a variety of accessory minerals typical of highly differentiated granites. Rock forming fluorite, partly enriched in yttrium (Y) and rare earth elements (REE), is intergrown with the late Y- and REE-bearing carbonate mineral synchysite. The granite contains a variety of Ti- and Y-REE-niobates, thorite, and zircon. Compared with the calc-alkaline central Aar granite (cAgr), Bristen granite is strongly depleted in Ti, P, Mg, Sr, and Ba and shows a remarkable enrichment in incompatible elements such as Rb, Th, U, Nb, Y, HREE and F. Bristen granite is the most evolved granitoid rock of the Aar massif. The composition of Brgr is typical of post-collisional reduced (ferroan) A-type granites. The Brgr melt formed in the lower crust and crystallized from a highly differentiated melt at the cotectic point in the quartz-feldspar system close to 100 MPa and 700 °C. The Brgr intruded as a small isolated stock pre-Variscan gneisses with sharply discordant contacts. The primary igneous host of Nb, Ta, Y, U, Th and REE is biotite in addition to minor amounts of allanite, and zircon. The presence of Y-REE-fluorite, synchysite, parisite and Y- and Ti-niobates and other REE-minerals can be related to reaction of igneous biotite and primary fluorite with hydrothermal fluids. The reaction is associated with alpine metamorphism, because Y-bearing fluorite and synchysite have been reported from Alpine fissures. The transformation of primary biotite to chlorite and muscovite released the heavy metal oxides under lower greenschist facies conditions that formed the Alpine diagnostic mineral stilpnomelane at about 300 °C.     

Formation Environment of Main Brown Coal Seam in Xi-2 Minefield of Shengli Coalfield Based on Coal Ash Phase Analysis

The formation environment of the main coal seam in Shengli coal mine is analyzed, and the effect of coal ash parameters on the coal-forming environment is mainly discussed according to gray component parameters combined with other coal quality test analysis data. Results show that the hydrodynamic conditions of the main coal during coal accumulation have a general pattern of strong northeast and weak southwest, and lakeside swamp is generally in the retrograde process from south to north. The No.5 coal seam is a water entry cycle, and the No.5_lower coal is a water withdrawal cycle. The No.6 thick coal seam is formed in the peat swamp environment where the water is shallow and the groundwater activity is weak. The input of terrestrial debris material was most abundant in the formation period of No.5_lower coal, followed by No.5 coal, and that in No.6 coal is the least. Vertically, the peat swamp environment changed from weak reduction to weak oxidation to strong reducing environment. The ash yield was low to high to low from bottom to top. The organic sulfur is the main type of sulfur in the main coal seam. The weaker the hydrodynamic condition, the higher the organic sulfur content in the reduction environment, while lower organic sulfur content in the oxidation environment. The peat swamp water of No.5_lower coal is medium alkaline, and the peat swamp water of No.5 and No. 6 coals is weakly alkaline or acidic.     

Chemical composition of rock-forming minerals and crystallization physicochemical conditions of the Middle Eocene I-type Haji Abad pluton,SW Buin-Zahra,Iran

The Haji Abad intrusion is a well-exposed Middle Eocene I-type granodioritc pluton in the Urumieh–Dokhtar magmatic assemblage (UDMA). The major constituents of the investigated rocks are K-feldspar, quartz, plagioclase, pyroxene, and minor Fe–Ti oxide and hornblende. The plagioclase compositions fall in the labradorite, andesine, and oligoclase fields. The amphiboles range in composition from magnesio-hornblende to tremolite–hornblende of the calcic-amphibole group. Most pyroxenes principally plot in the field of diopside. The calculated average pressure of emplacement is 1.9 kbar for the granodioritic rocks, crystallizing at depths of about 6.7 km. The highest pressure estimated from clinopyroxene geobarometry (5 kbar) reflects initial pyroxene crystallization pressure, indicating initial crystallization depth (17.5 km) in the Haji Abad granodiorite. The estimated temperatures using two-feldspar thermometry give an average 724 °C. The calculated average temperature for clinopyroxene crystallization is 1090 °C. The pyroxene temperatures are higher than the estimated temperature by feldspar thermometry, indicating that the pyroxene and feldspar temperatures represent the first and late stages of magmatic crystallization of Haji Abad granodiorite, respectively. Most pyroxenes plot above the line of Fe³⁺?=?0, indicating they crystallized under relatively high oxygen fugacity or oxidized conditions. Furthermore, the results show that the Middle Eocene granitoids crystallized from magmas with H₂O content about 3.2 wt%. The relatively high water content is consistent with the generation environment of HAG rocks in an active continental margin and has allowed the magma to reach shallower crustal levels. The MMEs with ellipsoidal and spherical shapes show igneous microgranular textures and chilled margins, probably indicating the presence of magma mixing. Besides, core to rim compositional oscillations (An and FeO) for the plagioclase crystals serve as robust evidence to support magma mixing. The studied amphiboles and pyroxenes are grouped in the subalkaline fields that are consistent with crystallization from I-type calc-alkaine magma in the subduction environment related to active continental margin. Mineral chemistry data indicate that Haji Abad granodiorites were generated in an orogenic belt related to the volcanic arc setting consistent with the subduction of Neo-Tethyan oceanic crust beneath the central Iranian microcontinent.     

Fragmentation during Rock Falls: Two Italian Case Studies of Hard and Soft Rocks

In recent years, rock fall phenomena in Italy have received considerable attention for risk mitigation through in situ observations and experimental data. This paper reports the study conducted at Camaldoli Hill, in the urban area of Naples, and at Monte Pellegrino, Palermo, Italy. The rocks involved are volcanic Neapolitan yellow tuff (NYT) in the former area and dolomitic limestone in the latter. Both rocks, even though with different strength characteristics, have shown a significant tendency towards rock fragmentation during run out. This behavior was first investigated by comparing the volumes of removable blocks on the cliff faces (V ₀) and fallen blocks on the slopes (V _f). It was assumed that the ratio V _f/V ₀ decreases with the distance (x _f) from the detachment area by an empirical law, which depends on a coefficient α, correlated with the geotechnical properties of the materials involved in the rock fall. Finally, this law was validated by observation of well-documented natural rock falls (Palermo) and by in situ full-scale tests (Naples). From the engineering perspective, consideration of fragmentation processes in rock fall modeling provides a means for designing low-cost mitigation measures.     

Sorption behaviour of pentachlorophenol in sub-Saharan tropical soils: soil types sorption dynamics

In order to predict exposure risks as well as appropriate remediation strategies for pesticides in soils, knowledge of pesticides sorption processes onto various representative soils is vital. Hence, laboratory batch experiments were carried out to study sorption of a pesticide, pentachlorophenol (PCP), on five soils obtained from different sub-Saharan agro-ecological zones (AEZs) in order to understand sorption equilibrium, kinetics, and thermodynamics. Experimental data showed that sorption equilibrium was attained within 24 h. The fitting of kinetic results and equilibrium data to different models suggested partly surface adsorption and partly partitioning of PCP within voids of the various soil components. Sorption was mainly attributed to sharing or exchange of valence electrons between negatively charged PCP molecules and positively charged soil sorption sites. The sorption process was spontaneous and accompanied by decreased entropy, but was pH and temperature dependent, reducing with increase in pH and temperature. The various soils’ PCP sorption capacities were directly proportional to their cation exchange capacities. The low PCP sorption observed in these soils suggested high risk of PCP being present in soil water solution, especially at higher temperatures, which can lead to contamination of the aquifer. This risk may be higher for soils obtained from AEZs with warmer natural temperatures.     

Formation of the adakite-like granitoid complex and porphyry copper-gold deposit in Shaxi from southern Tancheng-Lujiang fault belt： A clue to the West Pacific plate subduction

On the basis of the geological and geochemical studies, including chemical analysis of bulk rocks, rare-earth and trace element studies, fluid inclusion, and S and O isotopic analyses, the authors described the geo-logical background of the deposit in detail and presented significant proofs for the conditions of formation of the Shaxi porphyry copper-gold deposit. Compared with other large and supper-large porphyry copper deposits in China and the adjacent Cu-Au mineralized areas, the ore-forming processes and conditions were analyzed; and the possibil-ity of forming large porphyry copper deposits in the Shaxi area was discussed. The present study indicated that the ore-forming fluid and material were mainly of magmatic origin, while meteoric water played a certain role in the ore-forming processes. Interactions between subducting and overriding plates provided a major driving force for the formation of igneous rocks and the deposition of metal elements in East China since Jurassic. Based on the geo-chemical data of the Shaxi intrusive, it is found that the copper (gold) mineralization is closely related to the genesis of adakite-like intrusive in the Shaxi area. This adakite-like intrusive was formed in the subduction environment as a result of the subduction of the West Pacific plate toward the East China continent, where there is a great potential-ity to form a large porphyry copper deposit.     

Raman spectroscopic study of K-lingunite at various pressures and temperatures

K-lingunite is a high-pressure modification of K-feldspar that possesses the tetragonal hollandite structure. Variations of the Raman spectra of K-lingunite were studied up to ~31.5 GPa at room temperature, and in the range 79–823 K at atmospheric pressure. The Raman frequencies of all bands were observed to increase with increasing pressure, and decrease with increasing temperature for K-lingunite. This behavior is in line with those observed for most of other materials. New sharp Raman bands appear at pressures greater than 13–15 GPa, suggesting a phase transition in K-lingunite with increasing pressure. The transition is reversible when pressure was released. The appearance of these new Raman bands may correspond to the phase transition revealed earlier at around 20 GPa by X-ray diffraction studies. Instead of transforming back to its stable minerals, such as orthoclase, microcline or sanidine, K-lingunite became amorphous in the temperature range 803–823 K at atmospheric pressure.     

Glauconites from the Late Palaeocene — Early Eocene Naredi Formation,western Kutch and their genetic implications

Glauconitic minerals are considered as one of the valuable input parameters in sequence stratigraphic analysis of a basin. In the present study glauconitic minerals are reported from subtidal green shale facies in the lower part of the Late Paleocene-Early Eocene Naredi Formation of western Kutch. On the basis of the foraminiferal assemblage the glauconite bearing beds are interpreted to have formed in a mid shelf depositional settings of an unstable marine conditions. XRD studies confirm the glauconite mineralogy of the green pellets and provide an estimation of glauconite maturity. Textural attributes of the glauconites confirm their derivation by different degrees of alteration of precursor feldspar grains. Because of the authigenic origin and autochthonous nature, these glauconites hold promise for understanding sequence stratigraphy of the Palaeogene succession of the western Kutch.     

Comparative analysis of contributing parameters for rainfall-triggered landslides in the Lesser Himalaya of Nepal

In the Himalaya, people live in widely spread settlements and suffer more from landslides than from any other type of natural disaster. The intense summer monsoons are the main factor in triggering landslides. However, the relations between landslides and slope hydrology have not been a focal topic in Himalayan landslide research. This paper deals with the contributing parameters for the rainfall-triggered landslides which occurred during an extreme monsoon rainfall event on 23 July 2002, in the south-western hills of Kathmandu valley, in the Lesser Himalaya, Nepal. Parameters such as bedrock geology, geomorphology, geotechnical properties of soil, and clay mineralogy are described in this paper. Landslide modeling was performed in SEEP/W and SLOPE/W to understand the relationship of pore water pressure variations in soil layers and to determine the spatial variation of landslide occurrence. Soil characteristics, low angle of internal friction of fines in soil, medium range of soil permeability, presence of clay minerals in soil, bedrock hydrogeology, and human intervention were found to be the main contributing parameters for slope failures in the region.