Persistence of Artemisia steppe in the Tangra Yumco Basin,west-central Tibet,China: despite or in consequence of Holocene lake-level changes?

The closed Tangra Yumco Basin underwent the strongest Quaternary lake-level changes so far recorded on the Tibetan Plateau. It was hitherto unknown what effect this had on local Holocene vegetation development. A 3.6-m sediment core from a recessional lake terrace at 4,700 m a.s.l., 160 m above the present lake level of Tangra Yumco, was studied to reconstruct Holocene flooding phases (sedimentology and ostracod analyses), vegetation dynamics and human influence (palynology, charcoal and coprophilous fungi analyses). Peat at the base of the profile proves lake level was below 4,700 m a.s.l. during the Pleistocene/Holocene transition. A deep-lake phase started after 11 cal ka BP, but the ostracod record indicates the level was not higher than ~4,720 m a.s.l. (180 m above present) and decreased gradually after the early Holocene maximum. Additional sediment ages from the basin suggest recession of Tangra Yumco from the coring site after 2.6 cal ka BP, with a shallow local lake persisting at the site until ~1 cal ka BP. The final peat formation indicates drier conditions thereafter. Persistence of Artemisia steppe during the Holocene lake high-stand resembles palynological records from west Tibet that indicate early Holocene aridity, in spite of high lake levels that may have resulted from meltwater input. Yet pollen assemblages indicate humidity closer to that of present potential forest areas near Lhasa, with 500–600 mm annual precipitation. Thus, the early mid-Holocene humidity was sufficient to sustain at least juniper forest, but Artemisia dominance persisted as a consequence of a combination of environmental disturbances such as (1) strong early Holocene climate fluctuations, (2) inundation of habitats suitable for forest, (3) extensive water surfaces that served as barriers to terrestrial diaspore transport from refuge areas, (4) strong erosion that denuded the non-flooded upper slopes and (5) increasing human influence since the late glacial.     

Gas hydrates in shallow deposits of the Amsterdam mud volcano, Anaximander Mountains, Northeastern Mediterranean Sea

We investigated gas hydrate in situ inventories as well as the composition and principal transport mechanisms of fluids expelled at the Amsterdam mud volcano (AMV; 2,025 m water depth) in the Eastern Mediterranean Sea. Pressure coring (the only technique preventing hydrates from decomposition during recovery) was used for the quantification of light hydrocarbons in near-surface deposits. The cores (up to 2.5 m in length) were retrieved with an autoclave piston corer, and served for analyses of gas quantities and compositions, and pore-water chemistry. For comparison, gravity cores from sites at the summit and beyond the AMV were analyzed. A prevalence of thermogenic light hydrocarbons was inferred from average C₁/C₂₊ ratios <35 and δ¹³C-CH₄ values of ?50.6‰. Gas venting from the seafloor indicated methane oversaturation, and volumetric gas–sediment ratios of up to 17.0 in pressure cores taken from the center demonstrated hydrate presence at the time of sampling. Relative enrichments in ethane, propane, and iso-butane in gas released from pressure cores, and from an intact hydrate piece compared to venting gas suggest incipient crystallization of hydrate structure II (sII). Nonetheless, the co-existence of sI hydrate can not be excluded from our dataset. Hydrates fill up to 16.7% of pore volume within the sediment interval between the base of the sulfate zone and the maximum sampling depth at the summit. The concave-down shapes of pore-water concentration profiles recorded in the center indicate the influence of upward-directed advection of low-salinity fluids/fluidized mud. Furthermore, the SO ₄ ^2? and Ba²⁺ pore-water profiles in the central part of the AMV demonstrate that sulfate reduction driven by the anaerobic oxidation of methane is complete at depths between 30 cm and 70 cm below seafloor. Our results indicate that methane oversaturation, high hydrostatic pressure, and elevated pore-water activity caused by low salinity promote fixing of considerable proportions of light hydrocarbons in shallow hydrates even at the summit of the AMV, and possibly also of other MVs in the region. Depending on their crystallographic structure, however, hydrates will already decompose and release hydrocarbon masses if sediment temperatures exceed ca. 19.3°C and 21.0°C, respectively. Based on observations from other mud volcanoes, the common occurrence of such temperatures induced by heat flux from below into the immediate subsurface appears likely for the AMV.     

The role of ternary projections in colour displays for geochemical maps and in economic mineralogy and petrology

Ternary (triangular) diagrams show the compositional variation of three end-members, recalculated to 100%, and represent the projection into two dimensions of three or more components (since an end-member may represent the sum of more than one original component), and hence multiple space. During the present century they have been of particular importance in chemistry, the earth sciences, colour-mixing and the studies of colour that underlie the development of geochemical colour maps. Such concepts can be traced back to Newton's Opticks although he did not use an explicit ternary theory of colour mixing. Development of the trichromatic theory of colour deficiency began with Mariotte in the 17th century and was definitively established by Maxwell in the 1850s. These colour theorems underlie the development in recent years of the colour maps now in widespread use in geochemistry. The progress of regional geochemical mapping in the British Isles has gone hand-in-hand with the development of computer software and hardware. The use of multi-element colour-combined geochemical maps can be traced from early work at Imperial College by Webb and his co-workers (1964–79) to its later application in the British Geological Survey's Geochemical Atlas series (from 1983 onwards). Between 1955 and 1975 the use of ternary diagrams came to be commonly used in studies of mineralogical composition, including economic minerals, petrology, classification, and phase relationships. In igneous petrology, the quartz–alkali-feldspar–plagioclase-feldspathoid double-triangle has achieved increasing international acceptance. We illustrate these applications with examples pertinent to the Northern Highland Caledonides, with particular emphasis on the lamprophyres and associated rocks. Two distinct multivariate trends of variation are shown to be present which may warrant further investigation to elucidate their bearing on Caledonian mineralisation.     

A Critical Analysis of Transverse Dispersivity Field Data

Transverse dispersion, or tracer spreading orthogonal to the mean flow direction, which is relevant e.g, for quantifying bio-degradation of contaminant plumes or mixing of reactive solutes, has been studied in the literature less than the longitudinal one. Inferring transverse dispersion coefficients from field experiments is a difficult and error-prone task, requiring a spatial resolution of solute plumes which is not easily achievable in applications. In absence of field data, it is a questionable common practice to set transverse dispersivities as a fraction of the longitudinal one, with the ratio 1/10 being the most prevalent. We collected estimates of field-scale transverse dispersivities from existing publications and explored possible scale relationships as guidance criteria for applications. Our investigation showed that a large number of estimates available in the literature are of low reliability and should be discarded from further analysis. The remaining reliable estimates are formation-specific, span three orders of magnitude and do not show any clear scale-dependence on the plume traveled distance. The ratios with the longitudinal dispersivity are also site specific and vary widely. The reliability of transverse dispersivities depends significantly on the type of field experiment and method of data analysis. In applications where transverse dispersion plays a significant role, inference of transverse dispersivities should be part of site characterization with the transverse dispersivity estimated as an independent parameter rather than related heuristically to longitudinal dispersivity.     

Cooperite and braggite from the Bushveld Complex: implications for the miscibility gap and identification

Analyses of the Pt-Pd-Ni sulphides cooperite, braggite, and vysotskite reported from worldwide occurrences seem to imply a continuum of compositions between vysotskite and cooperite, with no obvious miscibility gap. This is contrary to the experimentally confirmed miscibility gap between cooperite and braggite, and the established compositional gap between co-existing cooperite and braggite from the Merensky Reef. Although the only unambiguous way of distinguishing between cooperite and braggite is to obtain structural information through X-ray diffraction or equivalent techniques, most identification of Pt-Pd-Ni sulphides is based on microanalytical techniques due to the small grain size of most platinum-group minerals. Ni contents also have to be considered because a classification based on the Pt/Pd ratio alone can be very misleading. Naming of Pt-Pd-Ni sulphide compositions with high Pt contents based on qualitative or semi-quantitative analyses should be avoided. Natural Pt-Pd-Ni sulphides which project into the compositional gap (established by experimental work) cannot be named without supporting structural information. Compositions of grains, which plot inside the gap, are considered to be metastable and to result from the loss of Pd through interaction with hydrothermal fluids.     

Impact of the Mediterranean Outflow Water on particle dynamics in intermediate waters of the Northeast Atlantic, as revealed by Th and Th

Over the last decade ²³⁴Th has become increasingly used to study particle transport in the ocean on a timescale of weeks. The application of ²³⁴Th is mainly focused on the determination of particle and associated carbon fluxes from oceanic surface water. However, ²³⁴Th is also suitable for investigating particle dynamic from the upper ocean down to interface sediments, as illustrated by the present work which reports unexpected behavior of ²³⁴Th in intermediate waters associated with the Mediterranean Outflow Water (MOW). Concentration profiles of dissolved ²³⁸U and ²²⁸Ra, and dissolved and particulate ²³⁴Th and ²²⁸Th were measured in the Mediterranean Outflow Water (MOW) near the Gibraltar Straits and at two sites (36°30′N–15°35′W, Nicole; 36°27′N–10°35′W, Yseult) which had hydrographic characteristics of Meddies, i.e. MOW that propagates as eddies in the Northeastern Atlantic at intermediate depths.There are marked differences in the distribution of thorium between MOW and the surrounding Atlantic waters. At the youngest Meddy Nicole salinity maximum at 1000 m depth, ²³⁴Th(total) : ²³⁸U and ²²⁸Th(total) : ²²⁸Ra activity ratios are significantly lower than radioactive equilibrium, indicating an unusual deficit of short half-life thorium nuclides. This implies an export of thorium, presumably on particles, from intermediate Meddy Nicole waters. This process is supported by an increase of particulate thorium fluxes measured in sediment traps deployed for two weeks above and within Meddy Nicole. In contrast, offshore Meddy Yseult has more typical profiles of both thorium nuclides that are nearly in equilibrium with their parents. These results indicate that at intermediate depths, the presence of MOW affects the exchange of reactive elements between particles and dissolved forms and enhances the downward flux of particles from intermediate waters in the Northeast Atlantic.     

Semiparametric regression models for spatial prediction and uncertainty quantification of soil attributes

In many studies, the distribution of soil attributes depends on both spatial location and environmental factors, and prediction and process identification are performed using existing methods such as kriging. However, it is often too restrictive to model soil attributes as dependent on a known, parametric function of environmental factors, which kriging typically assumes. This paper investigates a semiparametric approach for identifying and modeling the nonlinear relationships of spatially dependent soil constituent levels with environmental variables and obtaining point and interval predictions over a spatial region. Frequentist and Bayesian versions of the proposed method are applied to measured soil nitrogen levels throughout Florida, USA and are compared to competing models, including frequentist and Bayesian kriging, based an array of point and interval measures of out-of-sample forecast quality. The semiparametric models outperformed competing models in all cases. Bayesian semiparametric models yielded the best predictive results and provided empirical coverage probability nearly equal to nominal.     

Oxygen Utilization and Organic Carbon Remineralization in the Upper Water Column of the Pacific Ocean

As a part of the JGOFS synthesis and modeling project, researchers have been working to synthesize the WOCE/JGOFS/DOE/NOAA global CO₂ survey data to better understand carbon cycling processes in the oceans. Working with international investigators we have compiled a Pacific Ocean data set with over 35,000 unique samples analyzed for at least two carbon species, oxygen, nutrients, chlorofluorocarbon (CFC) tracers, and hydrographic parameters. We use these data here to estimate in-situ oxygen utilization rates (OUR) and organic carbon remineralization rates within the upper water column of the Pacific Ocean. OURs are derived from the observed apparent oxygen utilization (AOU) and the water age estimates based on CFCs in the upper water and natural radiocarbon in deep waters. The rates are generally highest just below the euphotic zone and decrease with depth to values that are much lower and nearly constant in water deeper than 1200 m. OURs ranged from about 0.02–10 μmol kg⁻¹yr⁻¹ in the upper water masses from about 100–1000 m, and averaged = 0.10 μmol kg⁻¹yr⁻¹ in deep waters below 1200 m. The OUR data can be used to directly estimate organic carbon remineralization rates using the C:O Redfield ratio given in Anderson and Sarmiento (1994). When these rates are integrated we obtain an estimate of 5.3 ± 1 Pg C yr⁻¹ for the remineralization of organic carbon in the upper water column of the Pacific Ocean. This revised version was published online in July 2006 with corrections to the Cover Date.     

A cyclone statistics for the Arctic based on European Centrere-analysis data

Summary  Based on the six-hourly re-analysis sea-level pressure data of the European Centre for Medium-Range Weather Forecast (ECMWF) a cyclone statistics for the Arctic region north of 60° is elaborated for the period 1 November 1986 to 31 October 1991. For each low pressure center on a weather map its location, central pressure and horizontal pressure gradients in E, W, N, and S direction are determined. Furthermore, cyclone centers are followed with time to calculate trajectories, pressure tendencies, and lifetimes. A horizontal grid of 300 km × 300 km is used as unit area for the statistical computations. A unit area experiences about 20 cyclone passages per year (range 5–40). On the average, six cyclones occur simultaneously in the Arctic region. Lifetimes vary from 6 h to 15 days. The annual cyclone activity over the 5-year period is nearly the same. Cyclones are more frequent in summer (about 94 per month) than in winter (77 per month). In general summer cyclones are weaker than winter cyclones. On the average, the minimum central pressure during the lifetime of a cyclone is about 1000 hPa (typical range 980–1020) in summer and about 988 hPa (typical range 940–1030) in winter. In winter, a zone of high cyclone frequency extends from the region near Iceland over the Greenland Sea, Barents Sea, and Kara Sea to the Laptev Sea while the interior of the Arctic shows little cyclone frequency. In summer, the region near Iceland and the interior of the Arctic are separate centers of high cyclone frequency. Both in winter and summer very high cyclone frequencies are observed over the northern Baffin Bay. The regional distribution of mean central pressures and maximum pressure gradients roughly follows the distribution of cyclone frequencies except for the Baffin Bay cyclones which are generally weak. Cyclolysis dominates cyclogenesis over largest parts of the Arctic. Regions of high cyclone frequency are also regions of frequent cyclogenesis and frequent cyclolysis. One third of all cyclones is generated in a region with an already existing cyclonic circulation. Cyclones in the Fram Strait are studied in more detail because of their special impact on the ice export from the Arctic Ocean to the Atlantic Ocean. On the average, there are 5 cyclones per month. the cyclone frequency in the Fram Strait is higher during the winter period than during the summer period. This is in contrast to the overall Arctic frequency which is higher in summer than in winter. Cyclogenesis predominates in winter and cyclolysis in summer in the Fram Strait. The most frequent direction of motion is from SW to NE. Received November, 1999 Revised June 22, 2000     

Factors controlling aggregate formation in the benthic boundary layer of the Mecklenburg Bight (western Baltic Sea)

Studies on aggregate formation and size distribution in relation to bottom water composition and flow regime were carried out in November 1994 at two transects in the inner and outer Mecklenburg Bight (Baltic Sea). The bottom water sampler ‘BIOPROBE' (BWS) was used to collect 10-dm³ water samples at 5, 10, 20 and 40 cm above the seabed. The outer transect samples tended to be more influenced by the open western Baltic Sea, whereas the inner transect samples were more affected by the coastal hydrography. Aggregate size distribution was investigated using a newly developed particle camera allowing identification of particles down to 150 μm size. Increasing concentrations of total particulate matter (TPM), particulate organic carbon (POC) and chlorophyll pigment equivalents (CPE) towards the seafloor together with a low proportion of POC/TPM (<5%) implied that the material was of resuspended origin. Aggregate size in both transects was positively correlated with TPM, transparent exopolymer particles (TEP) and bacterial cell abundance. Higher particle concentrations and aggregate numbers in the outer transect indicated a higher resuspension frequency, or lateral advection processes. The higher concentration of aggregates at the outer transect may reflect the larger amount of near-bottom transported material.