Short-Term Effects of an Oil Spill on Marsh-Edge Fishes and Decapod Crustaceans

On 19 April 2005, an oil spill occurred in southeastern Louisiana’s Barataria Bay estuary. We used a drop sampler to characterize the marsh-edge nekton community. Thirty-six locations were sampled in pre- and post-spill time frames from March through May 2005. Before–after control–impact (BACI) analyses of the total number of individuals (fishes + decapod crustaceans), total fishes, and sensitive species found significant interactions between the temporal (before/after) and spatial (control/impact) treatments and indicated an effect of the oil spill. Nonparametric analyses detected varied faunal assemblages across temporal treatments, but were similar in species composition among spatial treatments. While the BACI analyses showed event effects, differences were not strongly detected in nonparametric analyses of community structure. Fish are mobile and left the spill area after the disturbance, whereas the less mobile but more numerous benthic decapod crustaceans remained. The overall community structure appears to be robust and quickly recovered from the localized spill event.     

Nuclear and incommensurate magnetic structure of NaFeGe2O6 between 5?K and 298?K and new data on multiferroic NaFeSi2O6

The compound NaFeGe₂O₆ was grown synthetically as polycrystalline powder and as large single crystals suitable for X-ray and neutron-diffraction experiments to clarify the low temperature evolution of secondary structural parameters and to determine the low temperature magnetic spins structure. NaFeGe₂O₆ is isotypic to the clinopyroxene-type compound aegirine and adopts the typical HT-C2/c clinopyroxene structure down to 2.5?K. The Na-bearing M2 polyhedra were identified to show the largest volume expansion between 2.5?K and room temperature, while the GeO₄ tetrahedra behave as stiff units. Magnetic susceptibility measurements show a broad maximum around 33?K, which marks the onset of low-dimensional magnetic ordering. Below 12?K NaFeGe₂O₆ transforms to an incommensurately modulated magnetic spin state, with k?=?[0.323, 1.0, 0.080] and a helical order of spins within the M1-chains of FeO₆ octahedra. This is determined by neutron-diffraction experiments on a single crystal. Comparison of NaFeGe₂O₆ with NaFeSi₂O₆ is given and it is shown that the magnetic ordering in the latter compound, aegirine, also is complex and is best described by two different spin states, a commensurate one with C2??/c?? symmetry and an incommensurate one, best being described by a spin density wave, oriented within the (1 0 1) plane.     

Wind-induced drift of objects at sea: The leeway field method

A method for conducting leeway field experiments to establish the drift properties of small objects (0.1-25 m) is described. The objective is to define a standardized and unambiguous procedure for condensing the drift properties down to a set of coefficients that may be incorporated into existing stochastic trajectory forecast models for drifting objects of concern to search and rescue operations and other activities involving vessels lost at sea such as containers with hazardous material.An operational definition of the slip or wind and wave-induced motion of a drifting object relative to the ambient current is proposed. This definition taken together with a strict adherence to a 10 m wind speed allows us to refer unambiguously to the leeway of a drifting object. We recommend that all objects if possible be studied using what we term the direct method, where the object’s leeway is studied directly using an attached current meter.We establish a minimum set of parameters that should be estimated for a drifting object for it to be included in the operational forecast models used for prediction of search areas for drifting objects.We divide drifting objects into four categories, depending on their size. For the smaller objects (less than 0.5 m), an indirect method of measuring the object’s motion relative to the ambient current must be used. For larger objects, direct measurement of the motion through the near-surface water masses is strongly recommended. Larger objects are categorized according to the ability to attach current meters and wind monitoring systems to them.The leeway field method proposed here is illustrated with results from field work where three objects were studied in their distress configuration; a 1:3.3 sized model of a 40-foot Shipping container, a World War II mine and a 220 l (55-gallon) oil drum.     

Small mammal herbivory: Feedbacks that help maintain desertified ecosystems

We tested the hypothesis that herbivores contribute to feedbacks maintaining arid ecosystems in a degraded state. We studied small mammal herbivory on a subshrub, broom snakeweed (Gutierrezia sarothrae), and perennial grasses at three sites: (1) ungrazed black grama (Bouteloua eriopoda) grassland; (2) grassland degraded by intense short-duration grazing; and (3) mesquite (Prosopis glandulosa) coppice dunes. Snakeweed was browsed by herbivores primarily during dry winter months.The average percent of G. sarothrae standing crop biomass removed by browsing was 9.2 in ungrazed grassland, 7.4 in intensely grazed grassland, and 4.1 in the dunes. In ungrazed grassland, an average of 12% of grass cover was harvested by herbivores; in the intensely grazed plots – 80%. Herbivore exclusion plots showed that jackrabbits (Lepus californicus) were the primary browsers on snakeweed and rodents on grasses and G. sarothrae inflorescences. Rodent removal of G. sarothrae inflorescences allows wind dispersal of seeds in disturbed and desertified areas, thereby increasing abundance of this poisonous shrub. Grass-tiller cutting by rodents provides a strong feedback that may be responsible for keeping the grass cover low on the intensely grazed areas. Jackrabbit pruning has little effect on G. sarothrae abundance at any stage of desertification.     

A sediment budget for a grazed semi-arid catchment in the Burdekin basin, Australia

In catchments adjacent to the Great Barrier Reef World Heritage Area in Queensland, Australia, there is a growing concern that sediments and nutrients being exported from the land are having a detrimental effect on coral reef communities. There is a need to determine the processes and rates of erosion from the major land use types, so that management intervention can be initiated to reduce sediment yields where required. This paper presents a sediment budget for Weany Creek, a 13.5 km² grazed semi-arid sub-catchment of the Burdekin River catchment, Australia. A range of field methods was used to measure erosion from hillslopes, gullies and stream banks, as well as identify the amount of sediment being deposited and remobilised on the bed of gullies and the stream network. The data suggests that at least during drought conditions, the primary erosion source in this catchment is gully erosion. However, the largest source of sediment in the budget is actually associated with the remobilisation of in-channel sediment stores. Overall, the sediment budget is comprised of  81% coarse material and 19% fine sediment and an agreement between the fine sediment yield estimated in the sediment budget and the yield measured at the catchment outlet is within 10%. The total sediment yield estimated for this catchment is  4205 t yr^− 1 and is much lower than expected for a catchment of this size. This may reflect the drought conditions during the measurement period; however, there is also the possibility that the primary erosion sources have been exhausted, and the rates of sediment loss may be much lower now than they may have been in the past. Nonetheless, the results show that stored sediment, which may have been deposited in the channel many decades ago, is an important contributor to end of catchment sediment yields and warrants further investigation.     

The crystal and magnetic structure of Li-aegirine LiFe3+Si2O6: a temperature-dependent study

Single crystals of Li-aegirine LiFe³⁺Si₂O₆ were synthesized at 1573?K and 3?GPa, and a polycrystalline sample suitable for neutron diffraction was produced by ceramic sintering at 1223?K. LiFe³⁺Si₂O₆ is monoclinic, space group C2/c, a=9.6641(2)?Å, b= 8.6612(3)?Å, c=5.2924(2)?Å, β=110.12(1)^° at 300?K as refined from powder neutron data. At 229?K Li-aegirine undergoes a phase transition from C2/c to P2₁ /c. This is indicated by strong discontinuities in the temperature variation of the lattice parameters, especially for the monoclinic angle β and by the appearance of Bragg reflections (hkl) with h+k≠2n. In the low-temperature form two non-equivalent Si-sites with 〈SiA–O〉=1.622?Å and 〈SiB–O〉=1.624?Å at 100?K are present. The bridging angles of the SiO₄ tetrahedra O3–O3–O3 are 192.55(8)° and 160.02(9)° at 100?K in the two independent tetrahedral chains in space group P2₁ /c, whereas it is 180.83(9)° at 300?K in the high-temperature C2/c phase, i.e. the chains are nearly fully expanded. Upon the phase transition the Li-coordination changes from six to five. At 100?K four Li–O bond lengths lie within 2.072(4)–2.172(3)?Å, the fifth Li–O bond length is 2.356(4)?Å, whereas the Li–O3?A bond lengths amount to 2.796(4)?Å. From ⁵⁷Fe Mössbauer spectroscopic measurements between 80 and 500?K the structural phase transition is characterized by a small discontinuity of the quadrupole splitting. Temperature-dependent neutron powder diffraction experiments show first occurrence of magnetic reflections at 16.5?K in good agreement with the point of inflection in the temperature-dependent magnetization of LiFe³⁺Si₂O₆. Distinct preordering phenomena can be observed up to 35?K. At the magnetic phase transition the unit cell parameters exhibit a pronounced magneto-striction of the lattice. Below T _N Li-aegirine shows a collinear antiferromagnetic structure. From our neutron powder diffraction experiments we extract a collinear antiferromagnetic spin arrangement within the a–c plane.     

Compositional variation in Hg-bearing sphalerite from the polymetallic Eskay Creek deposit, British Columbia, Canada

The Eskay Creek, British Columbia, Canada, is a polymetallic, gold- and silver-rich, volcanic-hosted, massive sulfide deposit. The ore in the deposit is divided into subzones distinguished by mineralogy, texture, grade and metallurgical characteristics. This study presents the results of a mineralogical examination of three composite field samples, with emphasis on the chemistry of sphalerite. Sphalerite is associated with variable amounts of Hg-tetrahedrite and cinnabar, and an array of sulfides, sulphosalts and non-opaque minerals. Electron micro probe analyses of sphalerite in the three composite samples reveal wide variations in compositions. The Hg content in sphalerite in the three samples varies between 0.08 and 16.35 wt%, whereas the Fe content ranges from 0.33 to 2.29 wt%. The chemical formula of the sphalerite shows the compositional range (Zn_0.89–0.98Hg_0.01–0.09.Fe_0.005–0.02)S. Sphalerite exhibits an almost perfect substitution of Hg and Zn, as shown by the negative covariance between them. Sphalerite with the highest Hg contents tends to have the lowest Fe concentrations. The highest Hg contents in sphalerite are recorded in the samples with the highest bulk Hg concentrations and with the highest cinnabar contents.

The compositional variations of sphalerite are important because they can be used in mapping ore forming fluids and indicate possible temporal variations. Second, determination of the compositional variation of the sphalerite in the mine has metallurgical implications because the mineral is an important Zn source. The mineralogical data indicate that non-physical processes (e.g. pyrometallurgy) must be used to separate Hg from Zn concentrates, with direct environmental implications, that is, release of metals, such as Hg, into the environment during mining and processing.     

Elastic and visco-elastic stress triggering in the South Iceland Seismic Zone due to large earthquakes since 1706

Damaging earthquakes in the South Iceland Seismic Zone (SISZ) occur fairly regularly and often as a series of events with a few days only between individual events. Tolerably reliable information on epicentre locations and mechanisms are available for 13 M ≥ 6 events between 1706 and 2000. For these events, we computed the co- and post-seismic stress fields, hereby approximating the SISZ by a mixed elastic/visco-elastic layered half-space. The horizontal shear stress and the Coulomb stress changes were analysed to detect possible trigger mechanisms, which may aid future earthquake mitigation efforts. We tested several criteria but must conclude that the start of an earthquake series in the SISZ cannot be explained by triggering through previous events. Inside an individual series, however, one may infer triggering. Our results are in contradiction with the findings in other regions of the world. The reason might be related to the fact that the SISZ is not a mature fault zone, in which old faults are re-activated if a certain stress level threshold is passed. In addition, uncertainties in the model parameters as well as the neglect of horizontal variations in the model and of possible stress transfer due to volcanic activity further complicate the evaluation of our results and need to be taken into account in future studies.     

Changes in velocity profiles at roughness transitions in coarse grained channels

Heterogeneous coarse grained channels are often characterized by local transitions in bed surface roughness. Distinct spatial zones in terms of grain size have been reported, for example sand ribbons and bedload sheets. The transition from areas of finer to coarser grained surface sediment is often abrupt. However, the effects of these transitions on the shape of the velocity profile and associated shear velocity and roughness length estimates have not been investigated in detail in coarse grained channels. This paper therefore examines the combined effects of a sudden change in surface roughness and of superimposed scales of resistancé on the structure of the turbulent boundary layer. Measurements along roughness transitions from smooth to rough beds were conducted in a flume using artificial roughness features and in a natural gravel bed river. Immediately at the transition from a zone of close packed roughness to a rougher section dominated by obstacles superimposed on the more or less uniform roughness surface, boundary shear stress and roughness length increase considerably. Downstream from this transition, velocity profiles become concave upwards. Downstream and upstream sections show significant differences in terms of near bed velocities (deceleration downstream of the transition), velocity gradient and turbulence intensity of the streamwise velocity component. Comparing the mean velocity profiles corresponding to these two different roughness surfaces gives some indication of the proportion of total shear velocity (or shear stress) associated with the pressure drag produced by large and isolated obstacles.