Traffic-related immissions and their impact on historic buildings: implications from a pilot study at two German cities

Besides the enormous improvement of air quality in Germany due to the reduction of sulphur dioxide emissions in the last decades, high immissions of nitrogen oxides and fine particulate matter are frequently observed at traffic-rich urban sites. The changed chemical composition of air pollution requires a new investigation of its impact on historic buildings constructed of natural stone. In a pilot study a multi-disciplinary approach was chosen to obtain information on the actual pollution situation of historic buildings and monuments at traffic hotspots in Germany. The study concentrated on the two German cities of Munich and Mainz of different size, traffic volume and stone inventory. Dose–response functions were calculated to demonstrate the change of impact of different pollutants over the last three decades, and for comparison of traffic hotspots and housing areas of both cities. Numeric modelling on a city-scale was used to identify the historic buildings and monuments affected by elevated traffic immissions. Because a relevant part of these pollutants is dominated by short-range transport, the differences of wind speed and deposition rates were calculated using a street-scale 3D flow and dispersion model regarding traffic volume, wind regime and adjacent buildings. Finally, particulate matter was sampled at different positions of two buildings heavily exposed to traffic emissions. Individual particles were investigated by environmental scanning electron microscopy. After classification of the particles into different chemical groups, the fraction of traffic-induced particulate matter was quantified. Summarizing the results, it must be stated that soiling by traffic-related particulate matter, deposition of nitrates deriving from exhaust emission and other diffusely emitted components bear a severe damage potential for natural building stone at least locally at traffic-rich urban sites.     

The largest floods in the High Rhine basin since 1268 assessed from documentary and instrumental evidence

Abstract

The magnitudes of the largest known floods of the River Rhine in Basel since 1268 were assessed using a hydraulic model drawing on a set of pre-instrumental evidence and daily hydrological measurements from 1808. The pre-instrumental evidence, consisting of flood marks and documentary data describing extreme events with the customary reference to specific landmarks, was “calibrated” by comparing it with the instrumental series for the overlapping period between the two categories of evidence (1808–1900). Summer (JJA) floods were particularly frequent in the century between 1651–1750, when precipitation was also high. Severe winter (DJF) floods have not occurred since the late 19th century despite a significant increase in winter precipitation. Six catastrophic events involving a runoff greater than 6000 m ³ s^‐1 are documented prior to 1700. They were initiated by spells of torrential rainfall of up to 72 h (1480 event) and preceded by long periods of substantial precipitation that saturated the soils, and/or by abundant snowmelt. All except two (1999 and 2007) of the 43 identified severe events (SEs: defined as having runoff > 5000 and < 6000 m ³ s ^‐1) occurred prior to 1877. Not a single SE is documented from 1877 to 1998. The intermediate 121-year-long “flood disaster gap” is unique over the period since 1268. The effect of river regulations (1714 for the River Kander; 1877 for the River Aare) and the building of reservoirs in the 20th century upon peak runoff were investigated using a one-dimensional hydraulic flood-routing model. Results show that anthropogenic effects only partially account for the “flood disaster gap” suggesting that variations in climate should also be taken into account in explaining these features.

Citation Wetter, O., Pfister, C., Weingartner, R., Luterbacher, J., Reist, T., & Trösch, J. (2011) The largest floods in the High Rhine basin since 1268 assessed from documentary and instrumental evidence. Hydrol. Sci. J. 56(5), 733–758.     

CODE’s five-system orbit and clock solution—the challenges of multi-GNSS data analysis

This article describes the processing strategy and the validation results of CODE’s MGEX (COM) orbit and satellite clock solution, including the satellite systems GPS, GLONASS, Galileo, BeiDou, and QZSS. The validation with orbit misclosures and SLR residuals shows that the orbits of the new systems Galileo, BeiDou, and QZSS are affected by modelling deficiencies with impact on the orbit scale (e.g., antenna calibration, Earth albedo, and transmitter antenna thrust). Another weakness is the attitude and solar radiation pressure (SRP) modelling of satellites moving in the orbit normal mode—which is not yet correctly considered in the COM solution. Due to these issues, we consider the current state COM solution as preliminary. We, however, use the long-time series of COM products for identifying the challenges and for the assessment of model-improvements. The latter is demonstrated on the example of the solar radiation pressure (SRP) model, which has been replaced by a more generalized model. The SLR validation shows that the new SRP model significantly improves the orbit determination of Galileo and QZSS satellites at times when the satellite’s attitude is maintained by yaw-steering. The impact of this orbit improvement is also visible in the estimated satellite clocks—demonstrating the potential use of the new generation satellite clocks for orbit validation. Finally, we point out further challenges and open issues affecting multi-GNSS data processing that deserves dedicated studies.     

Between carbonatite and lamproite—Diamondiferous Torngat ultramafic lamprophyres formed by carbonate-fluxed melting of cratonic MARID-type metasomes

New U-Pb perovskite ages reveal that diamondiferous ultramafic lamprophyre magmas erupted through the Archean crust of northern Labrador and Quebec (eastern Canada) between ca. 610 and 565 Ma, a period of strong rifting activity throughout contiguous Laurentia and Baltica. The observed Torngat carbonate-rich aillikite/carbonatite and carbonate-poor mela-aillikite dyke varieties show a large spread in Sr-Nd-Hf-Pb isotope ratios with pronounced correlations between isotope systems. An isotopically depleted component is identified solely within aillikites (⁸⁷Sr/⁸⁶Sr_i = 0.70323-0.70377; εNd_i = +1.2-+1.8; εHf_i = +1.4-+3.5; ²⁰⁶Pb/²⁰⁴Pb_i = 18.2-18.5), whereas some aillikites and all mela-aillikites range to more enriched isotope signatures (⁸⁷Sr/⁸⁶Sr_i = 0.70388-0.70523; εNd_i = −0.5 to −3.9; εHf_i = −0.6 to −6.0; ²⁰⁶Pb/²⁰⁴Pb_i = 17.8-18.2). These contrasting isotopic characteristics of aillikites/carbonatites and mela-aillikites, along with subtle differences in their modal carbonate, SiO₂, Al₂O₃, Na₂O, Cs-Rb, and Zr-Hf contents, are consistent with two distinctive metasomatic assemblages of different age in the mantle magma source region.Integration of petrologic, geochemical, and isotopic information leads us to propose that the isotopically enriched component originated from a reduced phlogopite-richterite-Ti-oxide dominated source assemblage that is reminiscent of MARID suite xenoliths. In contrast, the isotopically depleted component was derived from a more oxidized phlogopite-carbonate dominated source assemblage. We argue that low-degree CO₂-rich potassic silicate melts from the convective upper mantle were preferentially channelled into an older, pre-existing MARID-type vein network at the base of the North Atlantic craton lithosphere, where they froze to form new phlogopite-carbonate dominated veins. Continued stretching and thinning of the cratonic lithosphere during the Late Neoproterozoic remobilized the carbonate-rich vein material and induced volatile-fluxed fusion of the MARID-type veins and the cold peridotite substrate. Isotopic modelling suggests that only 5-12% trace element contribution from such geochemically extreme MARID-type material is required to produce the observed compositional shift from the isotopically most depleted aillikites/carbonatites towards enriched mela-aillikites.We conclude that cold cratonic mantle lithosphere can host several generations of contrasting vein assemblages, and that each may have formed during past tectonic and magmatic events under distinctively different physicochemical conditions. Although cratonic MARID-type and carbonate-bearing veins in peridotite can be the respective sources for lamproite and carbonatite magmas when present as the sole metasome, their concomitant fusion in a complex source region may give rise to a whole new variety of deep volatile-rich magmas and we suggest that orangeites (formerly Group 2 kimberlites), kamafugites, and certain types of ultramafic lamprophyre are formed in this manner.     

Evaluating Topological Queries in Linked Data Using DBpedia and GeoNames in Switzerland and Scotland

This article explores the practicability and assesses the quality of searches for Wikipedia pages of topologically related administrative divisions in Switzerland and Scotland via Linked Data. To this end, the quality of searches in the English and German versions of DBpedia is compared, as is that of searches in GeoNames and DBpedia using DBpedia's links to GeoNames or a manually created list of links. In addition, the effects of updates to Swiss municipality borders in the English version of DBpedia on standard quality metrics are studied. It turns out that live searches are practicable with acceptable performance, but that the quality of searches in terms of recall and precision is acceptable only if DBpedia is queried via GeoNames and DBpedia's links to GeoNames are replaced by manually created links. Searches for Scottish unitary authority wards perform poorly for all approaches investigated. Recall and precision are strongly influenced by changes in municipality borders, with a relatively long latency suggesting that, at least in some cases, administrative changes propagate slowly into DBpedia. These results have important implications for those seeking to use location as a means to link data.     

When timing matters-considering changing temporal structures in runoff response surfaces

Scenario-neutral response surfaces illustrate the sensitivity of a simulated natural system, represented by a specific impact variable, to systematic perturbations of climatic parameters. This type of approach has recently been developed as an alternative to top-down approaches for the assessment of climate change impacts. A major limitation of this approach is the underrepresentation of changes in the temporal structure of the climate input data (i.e., the seasonal and day-to-day variability) since this is not altered by the perturbation. This paper presents a framework that aims to examine this limitation by perturbing both observed and projected climate data time series for a future period, which both serve as input into a hydrological model (the HBV model). The resulting multiple response surfaces are compared at a common domain, the standardized runoff response surface (SRRS). We apply this approach in a case study catchment in Norway to (i) analyze possible changes in mean and extreme runoff and (ii) quantify the influence of changes in the temporal structure represented by 17 different climate input sets using linear mixed-effect models. Results suggest that climate change induced increases in mean and peak flow runoff and only small changes in low flow. They further suggest that the effect of the different temporal structures of the climate input data considerably affects low flows and floods (at least 21% influence), while it is negligible for mean runoff.     

Enabling collaborative GeoVisual analytics: Systems,techniques, and research challenges

Collaboration across disciplines is recognized as one of the great challenges for research in visual analysis of geographic information (GeoVisual Analytics, GVA). Considering the increasing availability of geodata and the complexity of analytical problems, the need to advance the support for collaborative work is becoming more pressing and prominent. This article contributes to this objective by reviewing the state‐of‐the‐art of the support for collaborative work in GVA systems and by identifying research challenges and proposing strategies to address them. We conducted a systematic review, resulting in the identification of 13 collaborative systems, 6 distinct collaborative techniques, and 3 research challenges. We conclude that GVA is moving toward more effective support of multidisciplinary and cross‐domain collaborative analysis. However, to materialize this potential, research is needed to improve the support for hybrid collaborative scenarios, cross‐device collaboration, and support for time‐critical and long‐term analysis.     

Multiproxy evidence for terrestrial and aquatic ecosystem responses during the 8.2 ka cold event as recorded at Højby Sø, Denmark

A sediment succession from Højby Sø, a lake in eastern Denmark, covering the time period 9400–7400 cal yr BP was studied using high-resolution geochemistry, magnetic susceptibility, pollen, macrofossil, diatom, and algal pigment analysis to investigate responses of the terrestrial and aquatic ecosystems to the 8.2 ka cold event. A reduced pollen production by thermophilous deciduous tree taxa in the period c. 8250–8000 cal yr BP reveal that the forest ecosystem was affected by low temperatures during the summer and winter/early-spring seasons. This finding is consistent with the timing of the 8.2 ka cold event as registered in the Greenland ice cores. At Højby Sø, the climate anomaly appears to have started 200–250 yr earlier than the 8.2 ka cold event as the lake proxy data provide strong evidence for a precipitation-induced distinct increase in catchment soil erosion beginning around 8500 cal yr BP. Alteration of the terrestrial environment then resulted in a major aquatic ecosystem change with nutrient enrichment of the lake and enhanced productivity, which lasted until c. 7900 cal yr BP.     

Investigating dissolution of mechanically activated olivine for carbonation purposes

Mineral carbonation is one of several alternatives for CO₂ sequestration and storage. The reaction rates of appropriate minerals with CO₂, for instance olivine and serpentine with vast resources, are relatively slow in a CO₂ sequestration context and the rates have to be increased to make mineral carbonation a good storage alternative. Increasing the dissolution rate of olivine has been the focus of this paper. Olivine was milled with very high energy intensity using a laboratory planetary mill to investigate the effect of mechanical activation on the Mg extraction potential of olivine in 0.01 M HCl solution at room temperature and pressure. Approximately 30–40% of each sample was dissolved and water samples were taken at the end of each experiment. The pH change was used to calculate time series of the Mg concentrations, which also were compared to the final Mg concentrations in the water samples. Percentage dissolved and the specific reaction rates were estimated from the Mg concentration time series. The measured particle size distributions could not explain the rate constants found, but the specific surface area gave a good trend versus dissolution for samples milled wet and the samples milled with a small addition of water. The samples milled dry had the lowest measured specific surface areas (<4 m²/g), but had the highest rate constants. The crystallinity calculated from X-ray diffractograms, was the material parameter with the best fit for the observed differences in the rate constants. Geochemical modelling of mechanically activated materials indicated that factors describing the changes in the material properties related to the activation must be included. The mechanically activated samples in general reacted faster than predicted by the theoretical models. Mechanical activation as a pre-treatment method was found to enhance the initial specific reaction rates by approximately three orders of magnitude for a sample milled dry for 60 min in a planetary mono mill compared to an unactivated sample. Wet milling in the planetary mill did not produce samples with the same maximum reaction rate as dry milling, but wet milling in general might be easier to implement into a wet carbonation process. Mechanical activation in a planetary mill is likely to consume too much energy for CO₂ sequestration purposes, but the increase in obtained olivine rate constants illustrates a potential for using milling as a pre-treatment method.