Warm frontal structure in association with a rapidly deepening extratropical cyclone

Abstract

The detailed characteristics of a CASPII warm frontal passage are presented in this article. This storm, Intensive Operating Period (IOP) 13 (February 26–27, 1992), was observed in detail with an array of diverse instruments. It has the advantage over earlier freezing precipitation studies of having simultaneous, in situ and remote sensing measurements by aircraft and ground‐based Doppler radar.

The associated precipitation was in the form of banded structures parallel to the front. Within these bands were embedded precipitation cores, some parallel to the band, some perpendicular. The warm front itself was characterized by major perturbations in its kinematic and thermodynamic features. The cores oriented parallel to the front were the result of embedded convection generated, at least in part, by the irregularities in the frontal surface.

The cores oriented perpendicular to the front were closely associated with the 0°C isotherm on the underside of the frontal inversion. Precipitation phase changes played a significant role in the occurrence of wide near 0°C regions, both vertically and horizontally. These regions had a profound influence on the observed precipitation types and led to complex precipitation‐thermodynamic‐dynamic interactions. Instabilities produced by these interactions are seen in wave‐like features observed by the Doppler radar in these regions, both parallel and perpendicular to the frontal zone.     

A multi-hazard regional level impact assessment for Europe combining indicators of climatic and non-climatic change

To better prioritise adaptation strategies to a changing climate that are currently being developed, there is a need for quantitative regional level assessments that are systematic and comparable across multiple weather hazards. This study presents an indicator-based impact assessment framework at NUTS-2 level for the European Union that quantifies potential regional changes in weather-related hazards: heat stress in relation to human health, river flood risk, and forest fire risk. This is done by comparing the current (baseline) situation with two future time periods, 2011–2040 and 2041–2070. The indicator values for the baseline period are validated against observed impact data. For each hazard, the method integrates outcomes of a set of coherent high-resolution regional climate models from the ENSEMBLES project based on the SRES A1B emission scenario, with current and projected non-climatic drivers of risk, such as land use and socio-economic change. An index of regional adaptive capacity has been developed and compared with overall hazard impact in order to identify the potentially most vulnerable regions in Europe. The results show strongest increases in impacts for heat stress, followed by forest fire risk, while for flood risk the sign and magnitude of change vary across regions. A major difference with previous studies is that heat stress risk could increase most in central Europe, which is due to the ageing population there. An overall assessment combining the three hazards shows a clear trend towards increasing impact from climaterelated natural hazards for most parts of Europe, but hotspot regions are found in eastern and southern Europe due to their low adaptive capacities. This spatially explicit assessment can serve as a basis for discussing climate adaptation mainstreaming, and priorities for regional development in the EU.     

The effect of particle size distributions on the dynamics of falling precipitation zones

A simplistic study of the dynamics of a falling particle ensemble is described. It shows the effect created by the introduction of particle size distributions on precipitation onset and duration and compares it to the case where air motions or pressure fields triggered by the particles are neglected. The assumption of homogeneously sized raindrops seems adequate if precipitation rates and total rainfall are considered. As soon as timing is involved a more refined treatment is required.     

Modelling the multiphase near-surface chemistry related to ozone depletions in polar spring

Near-total depletions of ozone have been observed in the Arctic spring since the mid 1980s. The autocatalytic reaction cycles involving reactive halogens are now recognized to be of main importance for ozone depletion events in the polar boundary layer. We present sensitivity studies using the model MISTRA in the box-model mode on the influence of chemical species on these ozone depletion processes. In order to test the sensitivity of the chemistry under polar conditions, we compared base runs undergoing fluxes of either Br₂, BrCl, or Cl₂ to induce ozone depletions, with similar runs including a modification of the chemical conditions. The role of HCHO, H₂O₂, DMS, Cl₂, C₂H₆, HONO, NO₂, and RONO₂ was investigated. Cases with elevated mixing ratios of HCHO, H₂O₂, DMS, Cl₂, and HONO induced a shift in bromine speciation from Br / BrO to HOBr/HBr, while high mixing ratios of C₂H₆ induced a shift from HOBr/HBr to Br/BrO. The shifts from Br/BrO to HOBr/HBr accelerated the aerosol debromination, but also increased the total amount of deposited bromine at the surface (mainly via increased deposition of HOBr). For all NO_y species studied (HONO, NO₂, RONO₂) the chemistry is characterized by an increased bromine deposition on snow reducing the amount of reactive bromine in the air. Ozone is less depleted under conditions of high mixing ratios of NO_x. The production of HNO₃ led to the acid displacement of HCl, and the release of chlorine out of salt aerosol (Cl₂ or BrCl) increased.     

Intercomparison of measurements of stratospheric hydrogen fluoride

Observations of the vertical profile of hydrogen fluoride (HF) vapor in the stratosphere and of the vertical column amounts of HF above certain altitudes were made using a variety of spectroscopic instruments in the 1982 and 1983 Balloon Intercomparison Campaigns. Both emission instruments working in the far infrared spectral region and absorption instruments using solar occultation in the 2.5m region were employed. No systematic differences were seen in results from the two spectral regions. A mean profile from 20–45 km is presented, with uncertainties ranging from 20% to 50%. Total columns measured from ground and from 12 km are consistent with the profile if the mixing ratio for HF is small in the tropophere and low stratosphere.     

Spatial patterns of sub-tidal seagrasses and their tissue nutrients in the Torres Strait,northern Australia: Implications for management

The distribution and nutritional profiles of sub-tidal seagrasses from the Torres Strait were surveyed and mapped across an area of 31,000 km². Benthic sediment composition, water depth, seagrass species type and nutrients were sampled at 168 points selected in a stratified representative pattern. Eleven species of seagrass were present at 56 (33.3%) of the sample points. Halophila spinulosa, Halophila ovalis, Cymodocea serrulata and Syringodium isoetifolium were the most common species and these were nutrient profiled. Sub-tidal seagrass distribution (and associated seagrass nutrient concentrations) was generally confined to northern-central and south-western regions of the survey area (<longitude 142.60), where mean water depth was relatively shallow (approximately 13 m below MSL) and where sediments were comprised primarily muddy sand to gravelly sand. Seagrass nitrogen and starch content, the most important nutrients for marine herbivores, were significantly correlated with species and with the plant component (above or below ground). For all seagrass species, the above-ground component (shoots and leaves) possessed greater nitrogen concentrations than the below-ground component (roots and rhizomes), which possessed greater starch concentrations. S. isoetifolium had the highest total nitrogen concentrations (1.40±0.05% DW). However, it also had higher fibre concentrations (38.2±0.68% DW) relative to the other four species. H. ovalis possessed the highest starch concentrations (2.76±0.12% DW) and highest digestibility (83.24±0.66% DW) as well as the lowest fibre (27.2±0.66% DW). The high relative abundance (found at 55% of the sites that had seagrass) and nutrient quality characteristics of H. ovalis make it an important source of energy to marine herbivores that forage sub-tidally in the Torres Strait. There were two regions in Torres Strait (north-central and south-western) where sub-tidal seagrass meadows were prevalent and of relatively higher nutritional value. This spatial and nutritional information can be used by local agencies to manage and to protect the ecological, economic and cultural values of the sub-tidal seagrass ecosystems and associated fisheries of the Torres Strait.     

GOCE Gravity Field Processing Strategy

A processing strategy and the corresponding software architecture for the processing of GOCE (Gravity field and steady-state Ocean Circulation Explorer) observables is presented and described, with the major objective to compute a high-accuracy, high-resolution spherical harmonic model of the Earth's gravity field. The combination of two numerical solution strategies, i.e. the rigorous solution of the corresponding large normal equation systems applying parallel processing (on a PC cluster) as the core solver, and the fast semianalytic approach as a quick-look gravity field analysis (QL-GFA) tool, is proposed. Such a method fusion benefits from the advantages of the individual components: the rigorous inversion of the system providing also the full variance-covariance information, and the quickness enabling the consecutive production of intermediate gravity field solutions, for the purpose to analyse partial and incomplete data sets and to derive a diagnosis of the performance of the GOCE measurement system. The functionality and operability of the individual components are demonstrated in the framework of a closed loop simulation, which is based on a realistic mission scenario both in terms of the orbit configuration and the coloured measuring noise. Special concern is given to the accuracy of the recovered coefficients, the numerical behaviour, the required computing time, and the particular role of the individual modules within the processing chain. In the case of the core solver, it is demonstrated that the assembling and rigorous solution of large normal equation systems can be handled by using Beowulf clusters within a reasonable computing time. The application of the quick-look tool to partial data sets with short-term data gaps is demonstrated on the basis of several case studies. Additionally, the spectral analysis of the residuals of the adjustment is presented as a valuable tool for the verification of the noise characteristics of the GOCE gradiometer.     

A geochemical record of the mining history of the Erme Estuary, south Devon, UK

The concentration of selected trace metals (Cu, Pb and Zn) in salt-marsh sediments from within the Erme Estuary have been measured in order to assess possible historical sources of pollution. The Erme Estuary, south Devon, UK is an Area of Outstanding Natural Beauty and has remained largely unaffected by industrialisation, although a number of small silver–lead mines were in operation in the 1800s. Five cores reveal comparable geochemical profiles. An increase of lead at 40 cm depth is observed, reaching maximum values of 427 ppm. Less distinct trends are revealed by zinc and copper, probably reflecting the lack of widespread mining for ores of these elements within the catchment and possible post-depositional mobility rendering the metal concentrations non-contemporaneous with the chemostratigraphy of lead. The geochemical analysis of the salt-marsh sediments provides a fairly robust chemostratigraphic scheme and the likely sources of mine waste can be pinpointed within the catchment. Based upon reference to the historical mining record of these mines chemostratigraphic dating of the sediments can be achieved in order to provide an estimate of salt-marsh accretion rates and sea-level rise.     

Dual models of pore spaces

We present a model for pore spaces that consists of two parts related by duality: (1) a decomposition of an open polyhedral pore space into open contractible pore bodies separated by relatively open interfaces and (2) a pore network that is homotopy equivalent to the pore space. The dual model is unique and free of parameters, but it relies on regularity conditions for the pore space. We show how to approximate any pore space by the interior of a polyhedral complex such that the regularity conditions are fulfilled. Thus, we are able to calculate the dual model from synthetic porous media and images of real porous media. The pore bodies are unions of relatively open Delaunay cells with respect to the corners of the pore boundary, and the pore network consists of certain at most two-dimensional (2D) Voronoi cells with respect to the corners of the pore boundary. The pore network describes the neighborhood relations between the pore bodies. In particular, any relatively open 2D Delaunay face f separating two pore bodies has a unique (relatively open) dual network edge. In our model, f is a pore throat only if it is hit by its dual network edge. Thus, as opposed to widespread intuition, any pore throat is convex, and adjacent pore bodies are not necessarily separated by pore throats. Due to the duality between the pore network and the decomposition of the pore space into pore bodies it is straightforward to store the geometrical properties of the pore bodies [pore throats] as attributes of the dual network vertices [edges]. Such an attributed network is used to perform 2D drainage simulations. The results agree very well with those from a pore-morphology based modeling approach performed directly on the digital image of a porous medium. Contractibility of the pore bodies and homotopy equivalence of the pore space and the pore network is proven using discrete Morse theory and the nerve theorem from combinatorial topology.