Integrated geoelectrical resistivity,hydrochemical and soil property analysis methods to study shallow groundwater in the agriculture area,Machang, Malaysia

Integrated geoelectrical resistivity, hydrochemical and soil property analysis methods were used to study the groundwater characteristics of sandy soils within a shallow aquifer in the agriculture area, Machang. A pilot test investigation was done prior to the main investigation. The area was divided into two sites. Test-Site 1 is non-fertilized; Test-Site 2 is the former regularly fertilized site. From the surface to depths of 75 cm, a lower average resistivity was obtained in Test-Site 2 (around 0.37 less than in Test-Site 1). The presence of nitrate and chloride contents in pore water reduced the resistivity values despite the low moisture content. The pH values for the whole area range from 4.11 to 6.88, indicating that the groundwater is moderately to slightly acidic. In the southern region, concentration of nitrate is considered to be high (>20 mg/l), while it is nearly zero in the northern region. In the south, the soil properties are similar. However, the geoelectrical model shows lower resistivity values (around 18 Ω m) at the sites with relatively high nitrate concentration in the groundwater (>20 mg/l). Conversely, the sites with low nitrate concentration reveal the resistivity values to be higher (>35 Ω m). Basement and groundwater potential maps are generated from the interpolation of an interpreted resistivity model. The areas that possibly have nitrate-contaminated groundwater have been mapped along with groundwater flow patterns. The northern part of the area has an east to west groundwater flow pattern, making it impossible for contaminated water from the southern region to enter, despite the northern area having a lower elevation.     

Contribution of offshore islands in the prediction of water levels due to tide�Csurge interaction for the coastal region of Bangladesh

In this study, a doubly nested tide?Csurge interaction model was established for the coastal region of Bangladesh. A fine grid model, capable of incorporating all major offshore islands, was nested into a coarse grid model extending up to 15°N latitude of the Bay of Bengal. To take into account the thickly populated small and big islands between Barisal and Chittagong and the extreme bending of the coastline accurately, a very fine grid model for this region was again nested into the fine grid model. Along the northeast corner of this very fine grid model, the Meghna River discharge was taken into account. The boundaries of the coast and islands were approximated through proper stair step, and the model equations were solved by semi?Cimplicit finite difference technique using staggered grid. Appropriate tidal regime over the model domain was generated by forcing the sea level to be oscillatory with the constituent M2 along the southern open boundary of the coarse grid model omitting wind stress. This previously generated tidal regime was introduced as the initial state of the sea for nonlinear tide?Csurge interaction phenomenon. The model was applied to estimate water levels along the coastal region of Bangladesh due to the interaction of tide and surge associated with the storm April 1991, and the results were found to be in a reasonable agreement with those observed. The model was used to investigate the influence of offshore islands on water levels and water levels were found to be significantly influenced by offshore islands.     

Usage of multivariate geostatistics in interpolation processes for meteorological precipitation maps

Long-term meteorological data are very important both for the evaluation of meteorological events and for the analysis of their effects on the environment. Prediction maps which are constructed by different interpolation techniques often provide explanatory information. Conventional techniques, such as surface spline fitting, global and local polynomial models, and inverse distance weighting may not be adequate. Multivariate geostatistical methods can be more significant, especially when studying secondary variables, because secondary variables might directly affect the precision of prediction. In this study, the mean annual and mean monthly precipitations from 1984 to 2014 for 268 meteorological stations in Turkey have been used to construct country-wide maps. Besides linear regression, the inverse square distance and ordinary co-Kriging (OCK) have been used and compared to each other. Also elevation, slope, and aspect data for each station have been taken into account as secondary variables, whose use has reduced errors by up to a factor of three. OCK gave the smallest errors (1.002 cm) when aspect was included.     

Mapping groundwater recharge potential zones in arid region using GIS and Landsat approaches,southeast Tunisia

The rapid growth of population and agricultural and industrial activities has caused an increase in demand on the Jeffara aquifers of Gabes (southeast Tunisia). In fact, the over-pumping of this aquifer system has resulted in water-level declines ranging from 0.25 to 1 m/year during the past three decades. The aim of this study is to identify favourable artificial recharge sites of this aquifer system based on the combined use of remotely sensed data, a geographic information system (GIS), the Shuttle Radar Topography Mission (SRTM) product and a multiple criteria decision making (MCDM) technique. The delineation of artificial recharge zones shows high to moderate potential for groundwater recharge (40%) in the Gabes region, with high precision of good potential proposed sites. Recharge processes need to account for natural conditions and ecosystems.     

Asia-Pacific mussel watch: monitoring contamination of persistent organochlorine compounds in coastal waters of Asian countries

Contamination of persistent organochlorines (OCs) such as PCBs (polychlorinated biphenyls), DDT and its metabolites (DDTs), HCH (hexachlorocyclohexane) isomers (HCHs), chlordane compounds (CHLs), and HCB (hexachlorobenzene) were examined in mussels collected from coastal waters of Asian countries such as Cambodia, China, Hong Kong, India, Indonesia, Japan, Korea, Malaysia, Philippines, Far East Russia, Singapore, and Vietnam in 1994, 1997, 1998, 1999, and 2001 to elucidate the contamination status, distribution and possible pollution sources and to assess the risks on aquatic organisms and human. OCs were detected in all mussels collected from all the sampling sites investigated. Considerable residue levels of p,p(')-DDT and alpha-HCH were found in mussels and the concentrations of DDTs and HCHs found in mussels from Asian developing countries were higher than those in developed nations suggesting present usage of DDTs and HCHs along the coastal waters of Asian developing countries. On the other hand, lower concentrations of PCBs detected in mussels from Asian developing countries than those in developed countries indicate that PCBs contamination in mussels is strongly related to industrial and activities. To our knowledge, this is a first comprehensive report on monitoring OCs pollution in the Asia-Pacific region.     

Co-management of landfill leachate concentrate with brick waste by solidification/stabilization treatment

The treatment of landfill leachate by reverse osmosis (RO) generates huge volumes of heavily polluted concentrate that has to be properly treated before its discharge into the environment. The aim of this work was to assess the solidification/stabilization (S/S) treatment of the leachate concentrate (LC) for chemical/physical immobilization of contaminants and for obtaining durable monolithic matrix suitable for storage, landfilling, or use. In addition, the possible use of brick waste as a partial replacement of natural aggregates used for S/S process was investigated. Concrete mixtures were prepared using local PC, sand, gravel, and tap water/LC. The substitution of coarse aggregate material by brick waste was examined for the replacement ratios 25, 50, and 75%. Hardened concrete specimens were subject to compressive test as well as flexural strength test at 7 and 28 days. Besides, a leaching test was performed, and the collected eluates were analyzed for pH, total dissolved solids, chemical oxygen demand, chlorides, sulfates, phosphorus, and heavy metals. The aggregate replacement with brick waste showed various trends according to the substituted fraction size and ratio. A 28-day compressive strength of more than 25 MPa was obtained even at 50% simultaneous substitution of PC, gravel, and sand. Leaching test analysis confirmed that S/S could be a successful treatment for RO LC decreasing most of the pollutants to comply with landfilling criteria, except for chromium known to be mobile at high pH. Furthermore, the substitution of natural aggregates with brick waste revealed the possibility to cast valuable masonry units. However, a long-term assessment is still needed to ensure the mechanical and chemical stability/durability of concrete.     

A Case Study on the Effects of Heterogeneous Soil Moisture on Mesoscale Boundary-Layer Structure in the Southern Great Plains, U.S.A. Part I: Simple Prognostic Model

The atmospheric boundary-layer (ABL) depth was observed by airborne lidar and balloon soundings during the Southern Great Plains 1997 field study (SGP97). This paper is Part I of a two-part case study examining the relationship of surface heterogeneity to observed ABL structure. Part I focuses on observations. During two days (12–13 July 1997) following rain, midday convective ABL depth varied by as much as 1.5 km across 400 km, even with moderate winds. Variability in ABL depth was driven primarily by the spatial variation in surface buoyancy flux as measured from short towers and aircraft within the SGP97 domain. Strong correlation was found between time-integrated buoyancy flux and airborne remotely sensed surface soil moisture for the two case-study days, but only a weak correlation was found between surface energy fluxes and vegetation greenness as measured by satellite. A simple prognostic one-dimensional ABL model was applied to test to what extent the soil moisture spatial heterogeneity explained the variation in north–south ABL depth across the SGP97 domain. The model was able to better predict mean ABL depth and variations on horizontal scales of approximately 100 km using observed soil moisture instead of constant soil moisture. Subsidence, advection, convergence/divergence and spatial variability of temperature inversion strength also contributed to ABL depth variations. In Part II, assimilation of high-resolution soil moisture into a three-dimensional mesoscale model (MM5) is discussed and shown to improve predictions of ABL structure. These results have implications for ABL models and the influence of soil moisture on mesoscale meteorology     

Flow-plant interactions at a leaf scale: effects of leaf shape, serration, roughness and flexural rigidity

The effects of leaf shape, serration, roughness and flexural rigidity on drag force imposed by flowing water and its time variability were experimentally studied in an open-channel flume at seven leaf Reynolds numbers ranging from 5 to 35 × 10³. The study involved artificial leaves of the same surface area but with three shapes (‘elliptic’, ‘rectangular’ and ‘pinnate’), three flexural rigidities, smooth-edge and sawtooth-like serration, and three combinations of surface roughness (two-side rough, one-side rough/one-side smooth, and two-side smooth). Shape was the most important factor determining flow-leaf interactions, with flexural rigidity, serration and surface roughness affecting the magnitude but not the direction of the effect on drag control. The smooth-edge elliptic leaf had a better hydrodynamic shape as it experienced less drag force, with the rectangular leaf showing slightly less efficiency. The pinnate leaf experienced higher drag force than the other leaves due to its complex geometry. It is likely that flow separation from 12 leaflets of the pinnate leaf prevented leaf reconfiguration such as leaflets folding and/or streamlining. Flexural rigidity strongly influenced the leaf reconfiguration and augmented the serration effect since very rigid leaves showed a strong effect of serration. Furthermore, serration changed the turbulence pattern around the leaves by increasing the turbulence intensity. Surface roughness was observed to enhance the drag force acting on the leaf at high Reynolds numbers. The results also suggest that there are two distinctly different flow-leaf interaction regimes: (I) regime of passive interaction at low turbulence levels when the drag statistics are completely controlled by the turbulence statistics, and (II) regime of active interaction at high turbulence levels when the effect of leaf properties on the drag statistics becomes comparable to the turbulence contribution.     

Effect of mercury and cadmium on early life stages of Java medaka (Oryzias javanicus): a potential tropical test fish

Several organisms have been used as indicators, bio-monitoring agents or test organisms in ecotoxicological studies. A close relative of the well established Japanese medaka, the Java medaka (Oryzias javanicus), has the potential to be a test organism. The fish is native to the estuaries of the Malaysian Peninsula, Thailand, Indonesia and Singapore. In this study, newly fertilised eggs were exposed to different concentrations of Cd and Hg. Observations were done on the development of the embryos. Exposure to low levels of Cd and Hg (0.01-0.05 ppm) resulted in several developmental disorders that led to death. Exposure to ≥1.0 ppm Cd resulted in immediate developmental arrest. The embryos of Java medaka showed tolerance to a certain extent when exposed to ≥1.0 ppm Hg compared to Cd. Based on the sensitivity of the embryos, Java medaka is a suitable test organism for ecotoxicology in the tropical region.