Paleoproterozoic accretion in the Northeast Siberian craton: Isotopic dating of the Anabar collision system

Geochronological database considered in the work and characterizing the Anabar collision system in the Northeast Siberian craton includes coordinated results of Sm-Nd and Rb-Sr dating of samples from crustal xenoliths in kimberlites, deep drill holes, and bedrock outcrops. As is inferred, collision developed in three stages dated at 2200–2100, 1940–1760, and 1710–1630 Ma. The age of 2000–1960 Ma is established for substratum of mafic rocks, which probably originated during the lower crust interaction with asthenosphere due to the local collapse of the collision prism. Comparison of Sm-Nd and Rb-Sr isochron dates shows that the system cooling from ≈700 to ≈300°C lasted approximately 300 m.y. with a substantial lag relative to collision metamorphism and granite formation. It is assumed that accretion of the Siberian craton resulted in formation of a giant collision mountainous structure of the Himalayan type that was eroded by 1.65 Ga ago, when accumulation of gently dipping Meso-to Neoproterozoic (Riphean) platform cover commenced.     

Reliability Based Assessment of Shallow Foundations Using Mathcad

A reliability based method was used to design and analyse shallow foundations using first-order Taylor series approximation. The computer program Mathcad was used to facilitate all mathematical and computional efforts. This method is an effective tool to assist the foundation designers and analyists to investigate how reliable their designs or analyses are in relation to the ultimate bearing capacity of the foundations. The approach presented in this paper provides a reliable alternative for design and analysis of shallow foundations, rather than the conventional design methods, which employs the assumptions of a specified saftey factor. Several examples were presented for design and analysis of strip footings embedded in sandy soil, and rectangular and square footings analysis embedded in clayey soils. The program input and output of each example are also presented and discussed.     

Determination of specific yield using a water balance approach – case study of Torla Odha watershed in the Deccan Trap province, Maharastra State, India

Specific yield is an essential parameter for any groundwater management plan. Volumetric analysis in the domain of groundwater budgeting for the non-monsoon months has been undertaken for a typical watershed of the Deccan basalt province. The Torla Odha watershed covers an area of over 22 km² on a third-order tributary of the westerly flowing Bhima River. The watershed receives a normal annual rainfall of 643 mm. The entire water demand is supplied by dug wells, which penetrate a shallow aquifer. The specific yield was estimated by comparing the monthly net volume of water removed from the aquifer, with the volume of aquifer de-saturated, based on monthly water level data. The estimated specific yield ranges from 0.0019 in May to 0.0173 in November with an average value of 0.0093. A correlation of the groundwater levels with the detailed geology suggests that the higher specific yield value (0.017) corresponds to dewatering of the weathered zone within the shallow aquifer. The specific yield of the massive basalt immediately below the weathered zone varies from 0.0089 to 0.0103. The underlying vesicular basalt, which is dissected by sheet joints, has a relatively higher specific yield (0.0121). The massive basalt, which forms the base of the shallow aquifer system, has a lower specific yield from 0.0019 to 0.0022.

---

Résumé Le débit spécifique est un paramètre essentiel pour tout plan de gestion des eaux souterraines. Les analyses volumétriques, dans le cadre des bilans hydriques des eaux en dehors des mois de mousson, ont été entreprises pour un bassin-versant typique de la province basaltique du Deccan. Le bassin-versant du Torla Odha couvre une superficie de 22 km², et alimente l’affluent du troisième ordre de la rivière Bhima, qui coule vers l’Ouest. La pluviométrie annuelle atteint 643 mm. Toute la demande en eau es assurée par des puits foncés pénétrant dans l’aquifère phréatique. Le débit spécifique a été estimé en comparant le volume net mensuel d’eau captée dans l’aquifère, avec le volume de l’aquifère dé-saturé, basé sur les données des niveaux piézométriques mensuels. Le débit spécifique estimé s’étend entre 0,0019 en Mai et 0.173 en Novembre; la moyenne se situe à 0,0093. Une corrélation entre les niveaux des eaux souterraines et la géologie, suggère que les débits spécifiques les plus importants (0,017) correspondent aux zones altérées de l’aquifère phréatique. Le débit spécifique du massif basaltique, immédiatement sous la zone altérée, varie entre 0,0089 et 0,0103. Le basalte vésiculaire, situé juste en dessous et traversé par des diaclases parallèles, possède un débit spécifique sensiblement plus élevé (0,0121). Le basalte massif, qui forme la base de l’aquifère phréatique, possède un débit spécifique moins important, compris entre 0,0019 et 0,0022.

---

Resumen El rendimiento específico es un parámetro esencial para cualquier plan de manejo de aguas subterráneas. Se ha llevado a cabo el análisis volumétrico, en el entorno de balance de aguas subterráneas, para los meses sin monzón de una cuenca típica de la provincia de basaltos Deccan. La cuenca Rorla Odha cubre un área de 22 km² en un tributario de tercer orden del Río Bhima que fluye al oeste. La cuenca capta una lluvia anual normal de 643 mm. La totalidad de la demanda de agua es abastecida por pozos manuales que penetran un acuífero somero. Se estimó el rendimiento específico al comparar el volumen neto mensual de agua removido del acuífero con el volumen de agua de-saturado estimado a partir de datos de niveles de agua mensuales. Los valores estimados de rendimiento específico varían de 0.0019 en mayo a 0.0173 en noviembre con un valor promedio de 0.0093. La correlación de niveles de agua subterránea con la geología de detalle sugieren que el valor más alto (0.017) de rendimiento específico corresponden con el desaguado de la zona de intemperismo dentro del acuífero somero. El rendimiento específico del basalto masivo que se encuentra inmediatamente debajo de la zona de intemperismo varía de 0.0089 a 0.0103. El basalto vesicular subyacente, el cual está disectado por fracturas laminares, tiene un rendimiento específico relativamente más alto (0.0121). El basalto masivo, que forma la base del sistema de acuífero somero, tiene un rendimiento específico más bajo el cual varía de 0.0019 a 0.0022. Palabras clave: basalto Deccan. India. Rendimiento específico. Recarga de agua subterránea. Balance hídrico.

     

地下圆形衬砌隧道对沿线地震动的影响(II):数值结果

利用地下圆形衬砌隧道对入射平面P波和SV波散射级数解答，定量分析了入射波长、入射角度、隧道直径、衬砌刚度等因素对沿线地表位移放大作用的影响。计算结果表明，当入射频率较低时，地下隧道的存在对地表位移幅值影响不大；而当入射频率较高时，地表位移幅值可以达到无隧道情况的4．5倍以上；衬砌情况下地表位移幅值可以高出非衬砌情况的87．8％。建议在地铁的规划设计中考虑地下隧道的建设对隧道沿线设计地震动的影响。     

World-wide synthetic tide parameters for gravity and vertical and horizontal displacements

The response of the Earth’s crust to the direct effect of lunisolar gravitational forcing is known as the body tide. The body tide is superimposed by surface-loading forces due to the pressure of the periodically varying ocean tide acting on the Earth, called ocean tide loading (OTL). Both body tide and OTL can be decomposed into components of the same frequency known as tidal parameters. However, OTL is more complicated than body tides because of the dynamic effects of the ocean. Estimating OTL requires a model of the ocean tides and knowledge of the elastic properties of the solid Earth. Thus, synthetic tide parameters (amplitude factors and phase leads) have been developed here on a world-wide grid for gravity and positional displacements. The body tide contributions were added to the oceanic contribution to provide the Earth tide response. The accuracy and reliability of the synthetic tidal parameters have been estimated by comparing observed gravity and vertical-displacement tide parameters with those interpolated from our synthetic model, which shows good agreement. Tests also indicate that the synthetic tide parameters provide realistic gravimetric and displacements for practical use in tidal prediction.     

Boreal forest transmissivity in the microwave domain using ground-based measurements

This letter proposes an estimation of microwave transmissivity within the Canadian boreal forest. The aim is to correct the forest effect in snow water equivalent estimation from Special Sensor Microwave Imager and Advanced Microwave Scanning Radiometer microwave measurements. The estimation was carried out using ground-based radiometric measurements, at 19 and 37 GHz, and for both polarizations. The results show that the transmissivity is correlated with the stem volume and is independent of the tree species. For high stem volumes (>100 m/sup 3//ha), the transmissivity is found to be 0.4 and 0.3 for 19 and 37 GHz, respectively.     

A GIS numerical framework to study the process basis of scaling statistics in river networks

A new geographic information system (GIS) numerical framework (NF), called CUENCAS, for flows in river networks is presented. The networks are extracted from digital elevation models (DEMs). The program automatically partitions a basin into hillslopes and channel links that are required to correspond to these features in an actual terrain. To investigate the appropriate DEM resolution for this correspondence, we take a high-resolution DEM at 10-m pixel size, and create DEMs at eight different resolutions in increments of 10 m by averaging. The extracted networks from 10-30 m remain about the same, even though there is a tenfold reduction in the number of pixels. By contrast, the extracted networks show increasing distortions of the original network from 40-90 m DEMs. We show the presence of statistical self-similarity (scaling) in the probability distributions of drainage areas in a Horton-Strahler framework using CUENCAS. The NF for flows takes advantage of the hillslope-link decomposition of an actual terrain and specifies mass and momentum balance equations and physical parameterizations at this scale. These equations are numerically solved. An application of NF is given to test different physical assumptions that produce statistical self-similarity in spatial peak flow statistics in a Horton-Strahler framework.     

Combined Digital Photogrammetry and Time-of-Flight Laser Scanning for Monitoring Cliff Evolution

Although cliffs form approximately 75% of the world's coastline, the understanding of the processes through which they evolve remains limited because of a lack of quantitative data on the morphological changes they undergo. In this paper the combination of terrestrial time-of-flight laser scanning with high-resolution digital photogrammetry is examined to generate high-quality data-sets pertaining to the geomorphic processes governing cliff development. The study was undertaken on a section of hard rock cliffs in North Yorkshire, UK, which has been monitored over a 12-month period. High-density, laser-scanned point clouds have been used to produce an accurate representation of these complex surfaces, free from the optical variations that degrade photographic data. These data-sets have been combined with high-resolution photographic monitoring, resampled with the fixed accuracies of the terrestrial laser survey, to generate a new approach to recording the volumetric changes in complex coastal cliffs. This has led to significant improvements in the understanding of the activity patterns of coastal cliffs.     

Land use/land cover identification in an alpine and arid region (Nubra Valley, Ladakh) using satellite remote sensing

The remote sensing technology has been widely used for mapping the vegetation types in the tropical landscapes. However, in the temperate and alpine arid regions of India very few studies have been conducted using this technique. In the mountainous temperate arid conditions the vegetation is largely confined to marsh meadows, streams courses, river valleys and moist pockets close to snowfields. The ground truth collection in these zones are physically challenging due to tough terrain and restricted mobility. The detailed mapping of vegetation and other land use classes in these areas is therefore, extremely difficult. This paper describes the use of IRS-ID LISS III sensor for deciphering land cover details Nubra Valley, northern portion of Ladakh Autonomous Hill Council, Jammu & Kashmir (India). This analysis essentially emphasizes in bringing out various vegetation classes (speciallyHippophae rhamnoides and other medicinal plant communities) along the narrow river valleys.