Natural Gradient Tracer Test to Evaluate Natural Attenuation of MTBE Under Anaerobic Conditions

A natural gradient tracer test using perdeuterated MTBE was conducted in an anaerobic aquifer to determine the relative importance of dispersion and degradation in reducing MTBE concentrations in ground water. Preliminary ground water chemistry and hydraulic conductivity data were used to place the tracer within an existing dissolved MTBE plume at Port Hueneme, California. Following one year of transport, the tracer plume was characterized in detail.
Longitudinal dispersion was identified as the dominant mechanism for lowering the perdeuterated MTBE concentrations. The method of moments was used to determine the longitudinal and lateral dispersion coefficients (0.85 m²/day and 0.08 m²/day, respectively). A mass-balance analysis, carried out after one year of transport, accounted for 110% of the injected mass and indicated that no significant mass loss occurred. The plume structure created by zones of higher and lower hydraulic conductivity at the site was complex, consisting of several localized areas of high tracer concentration in a lower concentration plume. This is important because the aquifer has generally been characterized as exhibiting fairly minor heterogeneity. In addition, the tracer plume followed a curved flowpath that deviated from the more macroscopic direction of ground water flow inferred from local ground water elevation measurements and the behavior of the existing plume. Understanding the mass balance, plume structure, curvature of the tracer plume, and consequently natural attenuation behavior required the detailed sampling approach employed in this study. These data imply that a detailed understanding of site hydrogeology and an extensive sampling network may be critical for the correct interpretation of monitored natural attenuation of MTBE.     

CHROMOSPHERIC AND CORONAL STRUCTURE OF POLAR PLUMES – I. Magnetic Structure and Radiative Energy Balance

The Multi-Spectral Solar Telescope Array (MSSTA), a rocket-borne solar observatory, was successfully launched from White Sands Missile Range, New Mexico, on May 13, 1991 at 19:05 UT. The telescope systems onboard the MSSTA obtained several full disk solar images in narrow bandpasses centered around strong soft X-ray, EUV, and FUV emission lines. Each telescope was designed to be sensitive to the coronal plasmas at a particular temperature, for seven temperatures ranging from 20000 K to 4000000 K. We report here on the images obtained during the initial flight of the MSSTA, and on the chromospheric and coronal structure of polar plumes observed over both poles of the Sun. We have also co-aligned the MSSTA images with Kitt Peak magnetograms taken on the same day. We are able to positively identify the magnetic structures underlying the polar plumes we analyze as unipolar. We discuss the plume observations and present a radiative energy balance model derived from them.     

The early twentieth century Arctic high — fact or fiction?

Reconstructions of monthly mean sea-level grid-point pressure from station pressure data over the Arctic region using an objective technique have revealed two serious errors in the gridded data. First, all gridded data (from the U.S. Historical Weather Map series) for the Arctic Ocean area away from the North Atlantic sector appears to be between 4 and 6 mb too high before about 1931. The semi-permanent Arctic high produced in the early historical map series was the result of a lack of basic station data, and the belief amongst many North American meteorologists of the 1920s and 1930s of the existence of a polar or glacial anticyclone. The second error affects only north-western North America for the years 1899–1909. Here pressure is again too high compared with reconstructed data. The cause of this error is not immediately apparent, but is probably the result of an erroneous correction to sea level for stations in the region. Both errors seriously affect the homogeneity of the gridded Arctic series. The objective scheme used to reveal the errors, can also be used to derive correction factors for the gridded data prior to 1931.     

The present day formation of apatite in Mexican continental margin sediments

Results of pore water and sediment analyses from the western Mexican continental margin strongly suggest the present day formation of apatite. The interstitial water phosphate and fluoride profiles indicate chemical removal at a depth which corresponds to a large maximum in the phosphorus content of the sediments. Apatite is identified within this maximum via X-ray diffraction but is elsewhere undetectable in the core. Radioisotopic thorium, uranium, and radium data support the conclusion that this deposit is modern. The present day depositional environment is consistent with those reported by other workers for phosphorite formation with the exception that pore water magnesium is not depleted below its seawater value.     

Phytoplankton production and nutrient distributions in a subtropical estuary: Importance of freshwater flow

The relationships between phytoplankton productivity, nutrient distributions, and freshwater flow were examined in a seasonal study conducted in Escambia Bay, Florida, USA, located in the northeastern Gulf of Mexico. Five sites oriented along the salinity gradient were sampled 24 times over the 28-mo period from 1999 to 2001. Water column profiles of temperature and salinity were measured along with surface chlorophyll and surface inorganic nutrient concentrations. Primary productivity was measured at 2 sites on 11 dates, and estimated for the remaining dates and sites using an empirical regression model relating phytoplankton net production to the product of chlorophyll, euphotic zone depth, and daily solar insolation. Freshwater flow into the system varied markedly over the study period with record low flow during 2000, a flood event in March 2001, and subsequent resumption of normal flow. Flushing times ranged from 1 d during the flood to 20 d during the drought. Freshwater input strongly affected surface salinity distributions, nutrient flux, chlorophyll, and primary productivity. The flood caused high turbidity and rapid flushing, severely reducing phytoplankton production and biomass accumulation. Following the flood, phytoplankton biomass and productivity sharply increased. Analysis of nutrient distributions suggested Escambia Bay phytoplankton alternated between phosphorus limitation during normal flow and nitrogen limitation during low flow periods. This study found that Escambia Bay is a moderately productive estuary, with an average annual integrated phytoplankton production rate of 290 g C m⁻² yr⁻¹.     

Über die Verlagerung der Wasserscheide in Skandinavien nach der Eiszeit

Ohne Zusammenfassung     

Overview of integrative tools and methods in assessing ecological integrity in estuarine and coastal systems worldwide

In recent years, several sets of legislation worldwide (Oceans Act in USA, Australia or Canada; Water Framework Directive or Marine Strategy in Europe, National Water Act in South Africa, etc.) have been developed in order to address ecological quality or integrity, within estuarine and coastal systems. Most such legislation seeks to define quality in an integrative way, by using several biological elements, together with physico-chemical and pollution elements. Such an approach allows assessment of ecological status at the ecosystem level ('ecosystem approach' or 'holistic approach' methodologies), rather than at species level (e.g. mussel biomonitoring or Mussel Watch) or just at chemical level (i.e. quality objectives) alone. Increasing attention has been paid to the development of tools for different physico-chemical or biological (phytoplankton, zooplankton, benthos, algae, phanerogams, fishes) elements of the ecosystems. However, few methodologies integrate all the elements into a single evaluation of a water body. The need for such integrative tools to assess ecosystem quality is very important, both from a scientific and stakeholder point of view. Politicians and managers need information from simple and pragmatic, but scientifically sound methodologies, in order to show to society the evolution of a zone (estuary, coastal area, etc.), taking into account human pressures or recovery processes. These approaches include: (i) multidisciplinarity, inherent in the teams involved in their implementation; (ii) integration of biotic and abiotic factors; (iii) accurate and validated methods in determining ecological integrity; and (iv) adequate indicators to follow the evolution of the monitored ecosystems. While some countries increasingly use the establishment of marine parks to conserve marine biodiversity and ecological integrity, there is awareness (e.g. in Australia) that conservation and management of marine ecosystems cannot be restricted to Marine Protected Areas but must include areas outside such reserves. This contribution reviews the current situation of integrative ecological assessment worldwide, by presenting several examples from each of the continents: Africa, Asia, Australia, Europe and North America.     

The attenuation of chemical elements in acidic leachates from coal mineral wastes by soils

The chemical attenuation of acidity and selected elements (aluminum, arsenic, cadmium, cobalt, chromium, copper, fluorine, iron, manganese, nickel, and zinc) in acidic leachates from coal mineral wastes by four natural subsurface soils has been investigated using laboratory column methods Leachate solutions were allowed to percolate through the soils under simulated natural flow conditions, and the elemental concentrations in the influents and effluents were measured periodically Elemental retentions were substantial for all species except managanese, which was eluted in excess from all soils except the most calcareous Two processes appeared to operate in decreasing influent concentrations: (1) precipitation of solid phases caused by increased pH of the leachate as it percolated through the soil, and (2) adsorption of elements onto exchange and sorption sites naturally present in the soil and on iron and aluminum oxide precipitates formed in situ from leachate components because of the increased pH The soil property most important in retention was its alkalinity Thus, carbonaceous soils provide the best control material for acidic leachates from coal mineral wastes. Results show that natural soils can substantially reduce pollutant fluxes to the environment from acidic coal waste dumps and should be considered when selecting waste disposal sites Performed under the auspices of the U.S. Department of Energy     

Elucidation of the Alum Shale kerogen structure using a multi-disciplinary approach

The significance and validity of integrating data obtained from a variety of analytical techniques to understand, elucidate and model kerogen's complex chemical structure is reported here using degradative (open and closed system pyrolysis, chemical oxidation), non-degradative (¹³C CP/MAS NMR) and optical (incident white light and blue light) methods. Seven Cambrian Alum Shale samples, ranging in maturity from immature to post-mature with respect to petroleum generation, were studied and were chosen for their simple geological history, uniform organic matter type and high organic carbon content. The Alum Shale kerogens, which primarily consist of algal organic matter, liberate low molecular weight gaseous and aromatic compounds on pyrolysis and give mostly branched dicarboxylic acids on chemical oxidation. ¹³C NMR spectroscopy shows that the Alum Shale kerogens are anomalously rich in oxygen-bearing functional groups (such as C = O, ArCO, CHO, CH_xO), most of which apparently remain intact within the kerogen macro-molecule (KMM) through the diagenetic and catagenetic stages. Fragments released by different degradative techniques are quantified and the aromaticity (f_a), O/C and relative proportions of various carbon types estimated by ¹³C NMR. A synthesis of these data has allowed us to better understand the chemistry of the Alum Shale kerogen.     

Broadband seismic source data acquisition and processing to delineate iron oxide deposits in the Blötberget mine-central Sweden

A prototype electromagnetic vibrator, referred to here as E-Vib, was upgraded and developed for broadband hardrock and mineral exploration seismic surveys. We selected the iron oxide mine in Blötberget, central Sweden, for a test site in 2019 for the newly developed E-Vib because of the availability of earlier seismic datasets (from 2015 to 2016) for verification of its performance for hardrock imaging purposes. The two-dimensional data acquisition consisted of a fixed geometry with 550 receiver locations spaced at every 5 m, employing both cabled and wireless seismic recorders, along an approximately 2.7 km long profile. The E-Vib operated at every second receiver station (i.e. 10 m spacing) with a linear sweep of 2–180 Hz and with a peak force of 7 kN. The processing workflow took advantage of the broadband signal generated by the E-Vib in this challenging hardrock environment with varying ground conditions. The processed seismic section shows a set of reflections associated with the known iron oxide mineralization and a major crosscutting reflection interpreted to be from a fault system likely to be crosscutting the mineralization. The broadband source data acquisition and subsequent processing helped to improve signal quality and resolution in comparison with the earlier workflows and data where a drophammer seismic source was used as the seismic source. These results suggest new possibilities for the E-Vib source for improved targeting in hardrock geological settings.